- Jun 28, 2023
-
-
Vladimir Oltean authored
Two deadly typos break RX and TX traffic on the VSC8502 PHY using RGMII if phy-mode = "rgmii-id" or "rgmii-txid", and no "tx-internal-delay-ps" override exists. The negative error code from phy_get_internal_delay() does not get overridden with the delay deduced from the phy-mode, and later gets committed to hardware. Also, the rx_delay gets overridden by what should have been the tx_delay. Fixes: dbb050d2 ("phy: mscc: Add support for RGMII delay configuration") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Harini Katakam <harini.katakam@amd.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230627134235.3453358-1-vladimir.oltean@nxp.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Julia Lawall says: ==================== use vmalloc_array and vcalloc The functions vmalloc_array and vcalloc were introduced in commit a8749a35 ("mm: vmalloc: introduce array allocation functions") but are not used much yet. This series introduces uses of these functions, to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch. @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) v2: This series uses vmalloc_array and vcalloc instead of array_size. It also leaves a multiplication of a constant by a sizeof as is. Two patches are thus dropped from the series. ==================== Link: https://lore.kernel.org/r/20230627144339.144478-1-Julia.Lawall@inria.fr Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Julia Lawall authored
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by:Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-23-Julia.Lawall@inria.fr Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Julia Lawall authored
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by:Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-19-Julia.Lawall@inria.fr Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Julia Lawall authored
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by:Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-12-Julia.Lawall@inria.fr Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Julia Lawall authored
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by:Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-10-Julia.Lawall@inria.fr Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Julia Lawall authored
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by:Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-5-Julia.Lawall@inria.fr Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Julia Lawall authored
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by:Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-3-Julia.Lawall@inria.fr Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Jun 27, 2023
-
-
Matthieu Baerts authored
Our MPTCP CI and Stephen got this error: In file included from builtin-trace.c:907: trace/beauty/msg_flags.c: In function 'syscall_arg__scnprintf_msg_flags': trace/beauty/msg_flags.c:28:21: error: 'MSG_SPLICE_PAGES' undeclared (first use in this function) 28 | if (flags & MSG_##n) { | ^~~~ trace/beauty/msg_flags.c:50:9: note: in expansion of macro 'P_MSG_FLAG' 50 | P_MSG_FLAG(SPLICE_PAGES); | ^~~~~~~~~~ trace/beauty/msg_flags.c:28:21: note: each undeclared identifier is reported only once for each function it appears in 28 | if (flags & MSG_##n) { | ^~~~ trace/beauty/msg_flags.c:50:9: note: in expansion of macro 'P_MSG_FLAG' 50 | P_MSG_FLAG(SPLICE_PAGES); | ^~~~~~~~~~ The fix is similar to what was done with MSG_FASTOPEN: the new macro is defined if it is not defined in the system headers. Fixes: b848b26c ("net: Kill MSG_SENDPAGE_NOTLAST") Reported-by:Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/r/20230626112847.2ef3d422@canb.auug.org.au/ Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230626090239.899672-1-matthieu.baerts@tessares.net Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Allow slightly larger IPVS connection table size from Kconfig for 64-bit arch, from Abhijeet Rastogi. 2) Since IPVS connection table might be larger than 2^20 after previous patch, allow to limit it depending on the available memory. Moreover, use kvmalloc. From Julian Anastasov. 3) Do not rebuild VLAN header in nft_payload when matching source and destination MAC address. 4) Remove nested rcu read lock side in ip_set_test(), from Florian Westphal. 5) Allow to update set size, also from Florian. 6) Improve NAT tuple selection when connection is closing, from Florian Westphal. 7) Support for resetting set element stateful expression, from Phil Sutter. 8) Use NLA_POLICY_MAX to narrow down maximum attribute value in nf_tables, from Florian Westphal. * tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: limit allowed range via nla_policy netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET netfilter: snat: evict closing tcp entries on reply tuple collision netfilter: nf_tables: permit update of set size netfilter: ipset: remove rcu_read_lock_bh pair from ip_set_test netfilter: nft_payload: rebuild vlan header when needed ipvs: dynamically limit the connection hash table ipvs: increase ip_vs_conn_tab_bits range for 64BIT ==================== Link: https://lore.kernel.org/r/20230626064749.75525-1-pablo@netfilter.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Jun 26, 2023
-
-
David S. Miller authored
Edward Cree says: ==================== sfc: fix unaligned access in loopback selftests Arnd reported that the sfc drivers each define a packed loopback_payload structure with an ethernet header followed by an IP header, whereas the kernel definition of iphdr specifies that this is 4-byte aligned, causing a W=1 warning. Fix this in each case by adding two bytes of leading padding to the struct, taking care that these are not sent on the wire. Tested on EF10; build-tested on Siena and Falcon. Changed in v2: * added __aligned(4) to payload struct definitions (Arnd) * fixed dodgy whitespace (checkpatch) ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Add two bytes of padding to the start of struct ef4_loopback_payload, which are not sent on the wire. This ensures the 'ip' member is 4-byte aligned, preventing the following W=1 warning: net/ethernet/sfc/falcon/selftest.c:43:15: error: field ip within 'struct ef4_loopback_payload' is less aligned than 'struct iphdr' and is usually due to 'struct ef4_loopback_payload' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] struct iphdr ip; Reported-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Add two bytes of padding to the start of struct efx_loopback_payload, which are not sent on the wire. This ensures the 'ip' member is 4-byte aligned, preventing the following W=1 warning: net/ethernet/sfc/siena/selftest.c:46:15: error: field ip within 'struct efx_loopback_payload' is less aligned than 'struct iphdr' and is usually due to 'struct efx_loopback_payload' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] struct iphdr ip; Reported-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Add two bytes of padding to the start of struct efx_loopback_payload, which are not sent on the wire. This ensures the 'ip' member is 4-byte aligned, preventing the following W=1 warning: net/ethernet/sfc/selftest.c:46:15: error: field ip within 'struct efx_loopback_payload' is less aligned than 'struct iphdr' and is usually due to 'struct efx_loopback_payload' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] struct iphdr ip; Reported-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
These NLA_U32 types get stored in u8 fields, reject invalid values instead of silently casting to u8. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Phil Sutter authored
Analogous to NFT_MSG_GETOBJ_RESET, but for set elements with a timeout or attached stateful expressions like counters or quotas - reset them all at once. Respect a per element timeout value if present to reset the 'expires' value to. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
When all tried source tuples are in use, the connection request (skb) and the new conntrack will be dropped in nf_confirm() due to the non-recoverable clash. Make it so that the last 32 attempts are allowed to evict a colliding entry if this connection is already closing and the new sequence number has advanced past the old one. Such "all tuples taken" secenario can happen with tcp-rpc workloads where same dst:dport gets queried repeatedly. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Now that set->nelems is always updated permit update of the sets max size. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Callers already hold rcu_read_lock. Prior to RCU conversion this used to be a read_lock_bh(), but now the bh-disable isn't needed anymore. Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Skip rebuilding the vlan header when accessing destination and source mac address. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org>
-
- Jun 25, 2023
-
-
Jakub Kicinski authored
David Howells says: ==================== splice, net: Switch over users of sendpage() and remove it Here's the final set of patches towards the removal of sendpage. All the drivers that use sendpage() get switched over to using sendmsg() with MSG_SPLICE_PAGES. The following changes are made: (1) Make the protocol drivers behave according to MSG_MORE, not MSG_SENDPAGE_NOTLAST. The latter is restricted to turning on MSG_MORE in the sendpage() wrappers. (2) Fix ocfs2 to allocate its global protocol buffers with folio_alloc() rather than kzalloc() so as not to invoke the !sendpage_ok warning in skb_splice_from_iter(). (3) Make ceph/rds, skb_send_sock, dlm, nvme, smc, ocfs2, drbd and iscsi use sendmsg(), not sendpage and make them specify MSG_MORE instead of MSG_SENDPAGE_NOTLAST. (4) Kill off sendpage and clean up MSG_SENDPAGE_NOTLAST. Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=51c78a4d532efe9543a4df019ff405f05c6157f6 # part 1 Link: https://lore.kernel.org/r/20230616161301.622169-1-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20230617121146.716077-1-dhowells@redhat.com/ # v2 Link: https://lore.kernel.org/r/20230620145338.1300897-1-dhowells@redhat.com/ # v3 ==================== Link: https://lore.kernel.org/r/20230623225513.2732256-1-dhowells@redhat.com Signed-off-by:Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Now that ->sendpage() has been removed, MSG_SENDPAGE_NOTLAST can be cleaned up. Things were converted to use MSG_MORE instead, but the protocol sendpage stubs still convert MSG_SENDPAGE_NOTLAST to MSG_MORE, which is now unnecessary. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-afs@lists.infradead.org cc: mptcp@lists.linux.dev cc: rds-devel@oss.oracle.com cc: tipc-discussion@lists.sourceforge.net cc: virtualization@lists.linux-foundation.org Link: https://lore.kernel.org/r/20230623225513.2732256-17-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Remove ->sendpage() and ->sendpage_locked(). sendmsg() with MSG_SPLICE_PAGES should be used instead. This allows multiple pages and multipage folios to be passed through. Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-afs@lists.infradead.org cc: mptcp@lists.linux.dev cc: rds-devel@oss.oracle.com cc: tipc-discussion@lists.sourceforge.net cc: virtualization@lists.linux-foundation.org Link: https://lore.kernel.org/r/20230623225513.2732256-16-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Switch ocfs2 from using sendpage() to using sendmsg() + MSG_SPLICE_PAGES so that sendpage can be phased out. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Mark Fasheh <mark@fasheh.com> cc: Joel Becker <jlbec@evilplan.org> cc: Joseph Qi <joseph.qi@linux.alibaba.com> cc: ocfs2-devel@oss.oracle.com Link: https://lore.kernel.org/r/20230623225513.2732256-15-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
ocfs2 uses kzalloc() to allocate buffers for o2net_hand, o2net_keep_req and o2net_keep_resp and then passes these to sendpage. This isn't really allowed as the lifetime of slab objects is not controlled by page ref - though in this case it will probably work. sendmsg() with MSG_SPLICE_PAGES will, however, print a warning and give an error. Fix it to use folio_alloc() instead to allocate a buffer for the handshake message, keepalive request and reply messages. Fixes: 98211489 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Signed-off-by:
David Howells <dhowells@redhat.com> cc: Mark Fasheh <mark@fasheh.com> cc: Kurt Hackel <kurt.hackel@oracle.com> cc: Joel Becker <jlbec@evilplan.org> cc: Joseph Qi <joseph.qi@linux.alibaba.com> cc: ocfs2-devel@oss.oracle.com Link: https://lore.kernel.org/r/20230623225513.2732256-14-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage. This allows multiple pages and multipage folios to be passed through. TODO: iscsit_fe_sendpage_sg() should perhaps set up a bio_vec array for the entire set of pages it's going to transfer plus two for the header and trailer and page fragments to hold the header and trailer - and then call sendmsg once for the entire message. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Mike Christie <michael.christie@oracle.com> cc: Maurizio Lombardi <mlombard@redhat.com> cc: "James E.J. Bottomley" <jejb@linux.ibm.com> cc: "Martin K. Petersen" <martin.petersen@oracle.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: Al Viro <viro@zeniv.linux.org.uk> cc: open-iscsi@googlegroups.com Link: https://lore.kernel.org/r/20230623225513.2732256-13-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage. This allows multiple pages and multipage folios to be passed through. Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Mike Christie <michael.christie@oracle.com> cc: Lee Duncan <lduncan@suse.com> cc: Chris Leech <cleech@redhat.com> cc: "James E.J. Bottomley" <jejb@linux.ibm.com> cc: "Martin K. Petersen" <martin.petersen@oracle.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: Al Viro <viro@zeniv.linux.org.uk> cc: open-iscsi@googlegroups.com Link: https://lore.kernel.org/r/20230623225513.2732256-12-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Use sendmsg() conditionally with MSG_SPLICE_PAGES in _drbd_send_page() rather than calling sendpage() or _drbd_no_send_page(). Signed-off-by:
David Howells <dhowells@redhat.com> cc: Philipp Reisner <philipp.reisner@linbit.com> cc: Lars Ellenberg <lars.ellenberg@linbit.com> cc: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com> cc: Jens Axboe <axboe@kernel.dk> cc: drbd-dev@lists.linbit.com Link: https://lore.kernel.org/r/20230623225513.2732256-11-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Drop the smc_sendpage() code as smc_sendmsg() just passes the call down to the underlying TCP socket and smc_tx_sendpage() is just a wrapper around its sendmsg implementation. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Karsten Graul <kgraul@linux.ibm.com> cc: Wenjia Zhang <wenjia@linux.ibm.com> cc: Jan Karcher <jaka@linux.ibm.com> cc: "D. Wythe" <alibuda@linux.alibaba.com> cc: Tony Lu <tonylu@linux.alibaba.com> cc: Wen Gu <guwen@linux.alibaba.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> Link: https://lore.kernel.org/r/20230623225513.2732256-10-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
When transmitting data, call down into TCP using a single sendmsg with MSG_SPLICE_PAGES to indicate that content should be spliced rather than copied instead of calling sendpage. Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
Sagi Grimberg <sagi@grimberg.me> Acked-by:
Willem de Bruijn <willemb@google.com> cc: Keith Busch <kbusch@kernel.org> cc: Jens Axboe <axboe@fb.com> cc: Christoph Hellwig <hch@lst.de> cc: Chaitanya Kulkarni <kch@nvidia.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-nvme@lists.infradead.org Link: https://lore.kernel.org/r/20230623225513.2732256-9-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
When transmitting data, call down into TCP using a sendmsg with MSG_SPLICE_PAGES instead of sendpage. Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
Sagi Grimberg <sagi@grimberg.me> Acked-by:
Willem de Bruijn <willemb@google.com> cc: Keith Busch <kbusch@kernel.org> cc: Jens Axboe <axboe@fb.com> cc: Christoph Hellwig <hch@lst.de> cc: Chaitanya Kulkarni <kch@nvidia.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-nvme@lists.infradead.org Link: https://lore.kernel.org/r/20230623225513.2732256-8-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
When transmitting data, call down a layer using a single sendmsg with MSG_SPLICE_PAGES to indicate that content should be spliced rather using sendpage. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Christine Caulfield <ccaulfie@redhat.com> cc: David Teigland <teigland@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: cluster-devel@redhat.com Link: https://lore.kernel.org/r/20230623225513.2732256-7-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
When transmitting data, call down into TCP using a single sendmsg with MSG_SPLICE_PAGES to indicate that content should be spliced. To make this work, the data is assembled in a bio_vec array and attached to a BVEC-type iterator. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: rds-devel@oss.oracle.com Link: https://lore.kernel.org/r/20230623225513.2732256-6-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when transmitting data. For the moment, this can only transmit one page at a time because of the architecture of net/ceph/, but if write_partial_message_data() can be given a bvec[] at a time by the iteration code, this would allow pages to be sent in a batch. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Xiubo Li <xiubli@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> Link: https://lore.kernel.org/r/20230623225513.2732256-5-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when transmitting data. For the moment, this can only transmit one page at a time because of the architecture of net/ceph/, but if write_partial_message_data() can be given a bvec[] at a time by the iteration code, this would allow pages to be sent in a batch. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Xiubo Li <xiubli@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> Link: https://lore.kernel.org/r/20230623225513.2732256-4-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage in skb_send_sock(). This causes pages to be spliced from the source iterator if possible. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Note that this could perhaps be improved to fill out a bvec array with all the frags and then make a single sendmsg call, possibly sticking the header on the front also. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> Link: https://lore.kernel.org/r/20230623225513.2732256-3-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
As MSG_SENDPAGE_NOTLAST is being phased out along with sendpage(), don't use it further in than the sendpage methods, but rather translate it to MSG_MORE and use that instead. Signed-off-by:
David Howells <dhowells@redhat.com> cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> cc: Bernard Metzler <bmt@zurich.ibm.com> cc: Jason Gunthorpe <jgg@ziepe.ca> cc: Leon Romanovsky <leon@kernel.org> cc: John Fastabend <john.fastabend@gmail.com> cc: Jakub Sitnicki <jakub@cloudflare.com> cc: David Ahern <dsahern@kernel.org> cc: Karsten Graul <kgraul@linux.ibm.com> cc: Wenjia Zhang <wenjia@linux.ibm.com> cc: Jan Karcher <jaka@linux.ibm.com> cc: "D. Wythe" <alibuda@linux.alibaba.com> cc: Tony Lu <tonylu@linux.alibaba.com> cc: Wen Gu <guwen@linux.alibaba.com> cc: Boris Pismenny <borisp@nvidia.com> cc: Steffen Klassert <steffen.klassert@secunet.com> cc: Herbert Xu <herbert@gondor.apana.org.au> Link: https://lore.kernel.org/r/20230623225513.2732256-2-dhowells@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2023-06-21 mlx5 driver minor cleanup and fixes to net-next * tag 'mlx5-updates-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Remove pointless vport lookup from mlx5_esw_check_port_type() net/mlx5: Remove redundant check from mlx5_esw_query_vport_vhca_id() net/mlx5: Remove redundant is_mdev_switchdev_mode() check from is_ib_rep_supported() net/mlx5: Remove redundant MLX5_ESWITCH_MANAGER() check from is_ib_rep_supported() net/mlx5e: E-Switch, Fix shared fdb error flow net/mlx5e: Remove redundant comment net/mlx5e: E-Switch, Pass other_vport flag if vport is not 0 net/mlx5e: E-Switch, Use xarray for devcom paired device index net/mlx5e: E-Switch, Add peer fdb miss rules for vport manager or ecpf net/mlx5e: Use vhca_id for device index in vport rx rules net/mlx5: Lag, Remove duplicate code checking lag is supported net/mlx5: Fix error code in mlx5_is_reset_now_capable() net/mlx5: Fix reserved at offset in hca_cap register net/mlx5: Fix SFs kernel documentation error net/mlx5: Fix UAF in mlx5_eswitch_cleanup() ==================== Link: https://lore.kernel.org/r/20230623192907.39033-1-saeed@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Donald Hunter says: ==================== netlink: add display-hint to ynl Add a display-hint property to the netlink schema, to be used by generic netlink clients as hints about how to display attribute values. A display-hint on an attribute definition is intended for letting a client such as ynl know that, for example, a u32 should be rendered as an ipv4 address. The display-hint enumeration includes a small number of networking domain-specific value types. ==================== Link: https://lore.kernel.org/r/20230623201928.14275-1-donald.hunter@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Donald Hunter authored
Add display hints for mac, ipv4, ipv6, hex and uuid to the ovs_flow schema. Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20230623201928.14275-4-donald.hunter@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-