- Mar 24, 2009
-
-
Greg Ungerer authored
There is a couple of problems with the UART vector setup for the 5307 ColdFire UART. The ICR register access should be 8bit, not 32bit. The address of the UIVR register is wrong, it needs to be offset into the MBAR register region. Fix these. Signed-off-by:Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
There is a couple of problems with the UART vector setup for the 5307 ColdFire UART. The ICR register access should be 8bit, not 32bit. The address of the UIVR register is wrong, it needs to be offset into the MBAR register region. Fix these. Signed-off-by: -
Greg Ungerer authored
The address of the IVUR register is not correct, it should be offset into the MBAR region. Without this the vector is not set to the correct number. Signed-off-by: -
Greg Ungerer authored
The ICR registers of the 5249 ColdFire processor are 8bits, not 32bits. Fix the read/write of these register to be the correct size. Signed-off-by: -
Greg Ungerer authored
The UART platform data structure is missing an empty struct at the end (as the end of structure marker). Signed-off-by: -
Greg Ungerer authored
Switch to using generic_handle_irq() instead of the deprecated __do_IRQ(). Signed-off-by: -
Greg Ungerer authored
Simple merge of the mmu and non-mmu versions of tlbflush.h Signed-off-by: -
Greg Ungerer authored
Create basic support for clk API. Recent changes to the FEC driver (used by many ColdFire family parts) need this. Initially only supports getting the master clock frequency. Signed-off-by: -
Greg Ungerer authored
Simple merge of the mmu and non-mmu versions of module.h Signed-off-by: -
Greg Ungerer authored
Signed-off-by:
David Wu <david.wu@arcturusnetworks.com> Acked-by:
Michael Durrant <mdurrant@arcturusnetworks.com> Acked-by:
Oleksandr Zhadan <oleks@arcturusnetworks.com> Signed-off-by:
-
Greg Ungerer authored
Simple merge of the mmu and non-mmu versions of mmu_context.h Signed-off-by: -
Greg Ungerer authored
Trivial merge of the mmu and non-mmu versions of current.h Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org>
-
Greg Ungerer authored
Trivial merge of the mmu and non-mmu versions of div64.h Signed-off-by:
-
Greg Ungerer authored
Trivial merge of the mmu and non-mmu versions of bugs.h Signed-off-by:
-
Greg Ungerer authored
Trivial merge of the mmu and non-mmu versions of bug.h Signed-off-by:
-
Greg Ungerer authored
The non-mmu version of cache.h is almost the same as the mmu version. Merge them. Signed-off-by:
-
Greg Ungerer authored
All m68k varients can use the same mmu version of bootinfo.h Signed-off-by:
-
Greg Ungerer authored
Trivial merge of the mmu and non-mmu versions of fb.h Signed-off-by:
-
Greg Ungerer authored
Trivial merge of the mmu and non-mmu version of segment.h. Signed-off-by:
-
Greg Ungerer authored
The non-mmu m68k setups can use the mm ucontext.h with no change. Signed-off-by:
-
Len Sorensen authored
Due to a case of backwards logic, mfc.c always makes the console port be ttyS0 even when you ask for another port. This patch fixes this issue. Only when the requested port is NOT in the range 0 to MAXPORTS-1 do we force it to be treated as if port 0 was requested. Forcing the port to 0 when it is in fact in the range 0 to MAXPORTS is not helpful. Tested with working console on ttyS2 on a 5271evb. Signed-off-by:
Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
dma_addr_t (as was used by m68knommu) is more correct than u32. Signed-off-by:
-
Greg Ungerer authored
Trivial merge of the mmu and non-mmu version of pgalloc.h Signed-off-by:
-
Greg Ungerer authored
Move the definition of check_pgt_cache() to be consistent with where m68k defines it. (Will make merging of these headers easier later on). Signed-off-by:
-
Greg Ungerer authored
Trivial merge of the mmu and non-mmu versions of page_offset.h Signed-off-by:
-
Greg Ungerer authored
The mmu and non-mmu hw_irq.h are identical, revert to a single copy. Signed-off-by:
-
Greg Ungerer authored
The non-mmu version is appropriately ifdef'ed to be used "as is" on all m68k varients. So switch to it as the only unaligned.h. Signed-off-by:
-
Greg Ungerer authored
Nothing specificly needed to support non-mmu m68k in elf.h, so just use the mmu one. Signed-off-by:
-
Greg Ungerer authored
The non-mmu timex.h can be cleaned up and ends up being identical to the mmu timex.h, just just use that. Signed-off-by:
-
Greg Ungerer authored
None of the currently support m68knommu targets have an FPU. Use the mmu version of fpu.h for all m68k. Signed-off-by:
-
Greg Ungerer authored
There is only trivial differences between the non-mmu and mmu versions of scatterlist.h. So use the mmu one and remove the non-mmu one. Signed-off-by:
-
Greg Ungerer authored
Trivial merge of the contents of mmu and non-mmu versions of mmu.h Signed-off-by:
-
Greg Ungerer authored
The mcfpci.h was only used by the removed (m68knommu) COMEMPCI code. Signed-off-by:
-
Greg Ungerer authored
The mmu version of kmap_types.h is identical to the non-mmu one. Revert to a single file. Signed-off-by:
-
Greg Ungerer authored
The mmu varient of mc146818rtc.h can be use on the non-mmu builds as well. Revert to the single mc146818rtc.h file. Signed-off-by:
-
Greg Ungerer authored
The mmu version of dma-mapping.h (which is dma-mapping_mm.h) is clean to be used for non-mmu setups as well. Remove dma-mapping_no.h and revert dma-mapping_mm.h to dma-mapping.h Signed-off-by:
-
Greg Ungerer authored
The (m68knommu) COMEMPCI support has been removed from the kernel, so now the mmu pci.h can be used on non-mmu setups as well. Remove the non-mmu pci_no.h and revert the pci_mm.h to be pci.h. Signed-off-by:
-
Greg Ungerer authored
The onboard ethernet of many ColdFire parts uses DMA. The driver is being cleaned up to use the correct DMA handling functions, and m68knommuy currently does not implement dma_sync_single_for_cpu(). Signed-off-by: -
Greg Ungerer authored
There is no reason not to put all RAM in ZONE_DMA for these simple m68k varients (same as the standard MMU m68k code does). With this in place the usual dma_alloc_coherent() work as expected. Signed-off-by:
-
