Pull sound fixes from Takashi Iwai:
 "Hopefully the last one for 6.2, a collection of the fixes that have
  been gathered since the last pull.

  All changes are small and trivial device-specific fixes"

* tag 'sound-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Add Positivo N14KP6-TG
  ASoC: topology: Return -ENOMEM on memory allocation failure
  ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()
  ASoC: fsl_sai: fix getting version from VERID
  ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.
  ALSA: hda/realtek: Add quirk for ASUS UM3402 using CS35L41
  ASoC: codecs: es8326: Fix DTS properties reading
  ASoC: tas5805m: add missing page switch.
  ASoC: tas5805m: rework to avoid scheduling while atomic.
  ALSA: hda/realtek: Enable mute/micmute LEDs on HP Elitebook, 645 G9
  ASoC: SOF: amd: Fix for handling spurious interrupts from DSP
  ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro 360
  ALSA: pci: lx6464es: fix a debug loop
  ASoC: rt715-sdca: fix clock stop prepare timeout issue

Pull drm fixes from Dave Airlie:
 "Weekly fixes.

  The amdgpu had a few small fixes to display flicker on certain
  configurations, however it was found the the flicker was lessened but
  there were other unintended consequences, so for now they've been
  reverted and replaced with an option for users to test with so future
  fixes can be developed.

  Otherwise apart from the usual bunch of i915 and amdgpu, there's a
  client, virtio-gpu and an nvidiafb fix that reorders its loading to
  avoid failure.

  client:
   - refcount fix

  amdgpu:
   - a bunch of attempted flicker fixes that regressed turned into a
     user workaround option for now
   - Properly fix S/G display with AGP aperture enabled
   - Fix cursor offset with 180 rotation
   - SMU13 fixes
   - Use TGID for GPUVM traces
   - Fix oops on in fence error path
   - Don't run IB tests on hw rings when sw rings are in use
   - memory leak fix

  i915:
   - Display watermark fix
   - fbdev fix for PSR, FBC, DRRS
   - Move fd_install after last use of fence
   - Initialize the obj flags for shmem objects
   - Fix VBT DSI DVO port handling

  virtio-gpu:
   - fence fix

  nvidiafb:
   - regression fix for driver load when no hw supported"

* tag 'drm-fixes-2023-02-10' of git://anongit.freedesktop.org/drm/drm: (27 commits)
  Revert "drm/amd/display: disable S/G display on DCN 3.1.5"
  Revert "drm/amd/display: disable S/G display on DCN 2.1.0"
  Revert "drm/amd/display: disable S/G display on DCN 3.1.2/3"
  drm/amdgpu: add S/G display parameter
  drm/amdgpu/smu: skip pptable init under sriov
  amd/amdgpu: remove test ib on hw ring
  drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/fini
  drm/amdgpu: Use the TGID for trace_amdgpu_vm_update_ptes
  drm/amdgpu: Add unique_id support for GC 11.0.1/2
  drm/amd/pm: bump SMU 13.0.7 driver_if header version
  drm/amd/pm: bump SMU 13.0.0 driver_if header version
  drm/amd/pm: add SMU 13.0.7 missing GetPptLimit message mapping
  drm/amd/display: fix cursor offset on rotation 180
  drm/amd/amdgpu: enable athub cg 11.0.3
  Revert "drm/amd/display: disable S/G display on DCN 3.1.4"
  drm/amd/display: properly handling AGP aperture in vm setup
  drm/amd/display: disable S/G display on DCN 3.1.2/3
  drm/amd/display: disable S/G display on DCN 2.1.0
  drm/i915: Fix VBT DSI DVO port handling
  drm/client: fix circular reference counting issue
  ...

Pull rdma fixes from Jason Gunthorpe:
 "The usual collection of small driver bug fixes:

   - Fix error unwind bugs in hfi1, irdma rtrs

   - Old bug with IPoIB children interfaces possibly using the wrong
     number of queues

   - Really old bug in usnic calling iommu_map in an atomic context

   - Recent regression from the DMABUF locking rework

   - Missing user data validation in MANA"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rtrs: Don't call kobject_del for srv_path->kobj
  RDMA/mana_ib: Prevent array underflow in mana_ib_create_qp_raw()
  IB/hfi1: Assign npages earlier
  RDMA/umem: Use dma-buf locked API to solve deadlock
  RDMA/usnic: use iommu_map_atomic() under spin_lock()
  RDMA/irdma: Fix potential NULL-ptr-dereference
  IB/IPoIB: Fix legacy IPoIB due to wrong number of queues
  IB/hfi1: Restore allocated resources on failed copyout

Merge tag 'amd-drm-fixes-6.2-2023-02-09' of https://gitlab.freedesktop.org/agd5f/linux

 into drm-fixes

amd-drm-fixes-6.2-2023-02-09:

amdgpu:
- Add a parameter to disable S/G display
- Re-enable S/G display on all DCNs

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209174504.7577-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2023-02-09' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-fixes

- Display watermark fix (Ville)
- fbdev fix for PSR, FBC, DRRS (Jouni)
- Move fd_install after last use of fence (Rob)
- Initialize the obj flags for shmem objects (Aravind)
- Fix VBT DSI DVO port handling (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y+UZ0rh2YlhTrE4t@intel.com

A fix for a circular refcounting in drm/client, one for a memory leak in
amdgpu and a virtio fence fix when interrupted

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209083600.7hi6roht6xxgldgz@houat

Pull power management fix from Rafael Wysocki:
 "Fix the incorrect value returned by cpufreq driver's ->get() callback
  for Qualcomm platforms (Douglas Anderson)"

* tag 'pm-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems

Pull networking fixes from Paolo Abeni:
 "Including fixes from can and ipsec subtrees.

  Current release - regressions:

   - sched: fix off by one in htb_activate_prios()

   - eth: mana: fix accessing freed irq affinity_hint

   - eth: ice: fix out-of-bounds KASAN warning in virtchnl

  Current release - new code bugs:

   - eth: mtk_eth_soc: enable special tag when any MAC uses DSA

  Previous releases - always broken:

   - core: fix sk->sk_txrehash default

   - neigh: make sure used and confirmed times are valid

   - mptcp: be careful on subflow status propagation on errors

   - xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr()

   - phylink: move phy_device_free() to correctly release phy device

   - eth: mlx5:
      - fix crash unsetting rx-vlan-filter in switchdev mode
      - fix hang on firmware reset
      - serialize module cleanup with reload and remove"

* tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  selftests: forwarding: lib: quote the sysctl values
  net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used
  rds: rds_rm_zerocopy_callback() use list_first_entry()
  net: txgbe: Update support email address
  selftests: Fix failing VXLAN VNI filtering test
  selftests: mptcp: stop tests earlier
  selftests: mptcp: allow more slack for slow test-case
  mptcp: be careful on subflow status propagation on errors
  mptcp: fix locking for in-kernel listener creation
  mptcp: fix locking for setsockopt corner-case
  mptcp: do not wait for bare sockets' timeout
  net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0
  nfp: ethtool: fix the bug of setting unsupported port speed
  txhash: fix sk->sk_txrehash default
  net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg()
  net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA
  net: sched: sch: Fix off by one in htb_activate_prios()
  igc: Add ndo_tx_timeout support
  net: mana: Fix accessing freed irq affinity_hint
  hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC
  ...

Pull HID fixes from Benjamin Tissoires:

 - fix potential infinite loop with a badly crafted HID device (Xin
   Zhao)

 - fix regression from 6.1 in USB logitech devices potentially making
   their mouse wheel not working (Bastien Nocera)

 - clean up in AMD sensors, which fixes a long time resume bug (Mario
   Limonciello)

 - few device small fixes and quirks

* tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreen 29DF on HP
  HID: amd_sfh: if no sensors are enabled, clean up
  HID: logitech: Disable hi-res scrolling on USB
  HID: core: Fix deadloop in hid_apply_multiplier.
  HID: Ignore battery for Elan touchscreen on Asus TP420IA
  HID: elecom: add support for TrackBall 056E:011C

Pull cifx fix from Steve French:
 "Small fix for use after free"

* tag '6.2-rc8-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix use-after-free in rdata->read_into_pages()

This reverts commit 3cc67fe1

.

Some users have reported flickerng with S/G display.  We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to.  We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
We have a parameter to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further.  Having this enabled
seems like the lesser of to evils.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 2404f9b0

.

Some users have reported flickerng with S/G display.  We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to.  We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
We have a parameter to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further.  Having this enabled
seems like the lesser of to evils.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit f081cd4c

.

Some users have reported flickerng with S/G display.  We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to.  We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
We have a parameter to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further.  Having this enabled
seems like the lesser of to evils.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some users have reported flickerng with S/G display.  We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to.  We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
Add a option to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further.

v2: fix typo

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When set/restore sysctl value, we should quote the value as some keys
may have multi values, e.g. net.ipv4.ping_group_range

Fixes: f5ae5778

 ("selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230208032110.879205-1-liuhangbin@gmail.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

While running this selftest which usually passes:

~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc            [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti           [ OK ]
TEST: swp0: Multicast IPv4 to joined group                          [ OK ]
TEST: swp0: Multicast IPv4 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti               [ OK ]
TEST: swp0: Multicast IPv6 to joined group                          [ OK ]
TEST: swp0: Multicast IPv6 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti               [ OK ]

if I start PTP timestamping then run it again (debug prints added by me),
the unknown IPv6 MC traffic is seen by the CPU port even when it should
have been dropped:

~/selftests/drivers/net/dsa# ptp4l -i swp0 -2 -P -m
ptp4l[225.410]: selected /dev/ptp1 as PTP clock
[  225.445746] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_add: port 0 adding L2 PTP trap
[  225.453815] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP event trap
[  225.462703] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP general trap
[  225.471768] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP event trap
[  225.480651] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP general trap
ptp4l[225.488]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[225.488]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
^C
~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc            [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti           [ OK ]
TEST: swp0: Multicast IPv4 to joined group                          [ OK ]
TEST: swp0: Multicast IPv4 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti               [ OK ]
TEST: swp0: Multicast IPv6 to joined group                          [ OK ]
TEST: swp0: Multicast IPv6 to unknown group                         [FAIL]
        reception succeeded, but should have failed
TEST: swp0: Multicast IPv6 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti               [ OK ]

The PGID_MCIPV6 is configured correctly to not flood to the CPU,
I checked that.

Furthermore, when I disable back PTP RX timestamping (ptp4l doesn't do
that when it exists), packets are RX filtered again as they should be:

~/selftests/drivers/net/dsa# hwstamp_ctl -i swp0 -r 0
[  218.202854] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_del: port 0 removing L2 PTP trap
[  218.212656] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP event trap
[  218.222975] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP general trap
[  218.233133] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP event trap
[  218.242251] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP general trap
current settings:
tx_type 1
rx_filter 12
new settings:
tx_type 1
rx_filter 0
~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc            [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti           [ OK ]
TEST: swp0: Multicast IPv4 to joined group                          [ OK ]
TEST: swp0: Multicast IPv4 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti               [ OK ]
TEST: swp0: Multicast IPv6 to joined group                          [ OK ]
TEST: swp0: Multicast IPv6 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti               [ OK ]

So it's clear that something in the PTP RX trapping logic went wrong.

Looking a bit at the code, I can see that there are 4 typos, which
populate "ipv4" VCAP IS2 key filter fields for IPv6 keys.

VCAP IS2 keys of type OCELOT_VCAP_KEY_IPV4 and OCELOT_VCAP_KEY_IPV6 are
handled by is2_entry_set(). OCELOT_VCAP_KEY_IPV4 looks at
&filter->key.ipv4, and OCELOT_VCAP_KEY_IPV6 at &filter->key.ipv6.
Simply put, when we populate the wrong key field, &filter->key.ipv6
fields "proto.mask" and "proto.value" remain all zeroes (or "don't care").
So is2_entry_set() will enter the "else" of this "if" condition:

	if (msk == 0xff && (val == IPPROTO_TCP || val == IPPROTO_UDP))

and proceed to ignore the "proto" field. The resulting rule will match
on all IPv6 traffic, trapping it to the CPU.

This is the reason why the local_termination.sh selftest sees it,
because control traps are stronger than the PGID_MCIPV6 used for
flooding (from the forwarding data path).

But the problem is in fact much deeper. We trap all IPv6 traffic to the
CPU, but if we're bridged, we set skb->offload_fwd_mark = 1, so software
forwarding will not take place and IPv6 traffic will never reach its
destination.

The fix is simple - correct the typos.

I was intentionally inaccurate in the commit message about the breakage
occurring when any PTP timestamping is enabled. In fact it only happens
when L4 timestamping is requested (HWTSTAMP_FILTER_PTP_V2_EVENT or
HWTSTAMP_FILTER_PTP_V2_L4_EVENT). But ptp4l requests a larger RX
timestamping filter than it needs for "-2": HWTSTAMP_FILTER_PTP_V2_EVENT.
I wanted people skimming through git logs to not think that the bug
doesn't affect them because they only use ptp4l in L2 mode.

Fixes: 96ca08c0

 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230207183117.1745754-1-vladimir.oltean@nxp.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

rds_rm_zerocopy_callback() uses list_entry() on the head of a list
causing a type confusion.
Use list_first_entry() to actually access the first element of the
rs_zcookie_queue list.

Fixes: 9426bbc6

 ("rds: use list structure to track information for zerocopy completion notification")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230202-rds-zerocopy-v3-1-83b0df974f9a@diag.uniroma1.it


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'amd-drm-fixes-6.2-2023-02-08' of https://gitlab.freedesktop.org/agd5f/linux

 into drm-fixes

amd-drm-fixes-6.2-2023-02-08:

amdgpu:
- Flickering fixes for DCN 2.1, 3.1.2/3
- Re-enable S/G display on DCN 3.1.4
- Properly fix S/G display with AGP aperture enabled
- Fix cursor offset with 180 rotation
- SMU13 fixes
- Use TGID for GPUVM traces
- Fix oops on in fence error path
- Don't run IB tests on hw rings when sw rings are in use

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209045321.565132-1-alexander.deucher@amd.com

Steffen Klassert says:

====================
ipsec 2023-02-08

1) Fix policy checks for nested IPsec tunnels when using
   xfrm interfaces. From Benedict Wong.

2) Fix netlink message expression on 32=>64-bit
   messages translators. From Anastasia Belova.

3) Prevent potential spectre v1 gadget in xfrm_xlate32_attr.
   From Eric Dumazet.

4) Always consistently use time64_t in xfrm_timer_handler.
   From Eric Dumazet.

5) Fix KCSAN reported bug: Multiple cpus can update use_time
   at the same time. From Eric Dumazet.

6) Fix SCP copy from IPv4 to IPv6 on interfamily tunnel.
   From Christian Hopps.

* tag 'ipsec-2023-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  xfrm: fix bug with DSCP copy to v6 from v4 tunnel
  xfrm: annotate data-race around use_time
  xfrm: consistently use time64_t in xfrm_timer_handler()
  xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr()
  xfrm: compat: change expression for switch in xfrm_xlate64
  Fix XFRM-I support for nested ESP tunnels
====================

Link: https://lore.kernel.org/r/20230208114322.266510-1-steffen.klassert@secunet.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Update new email address for Wangxun 10Gb NIC support team.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20230208023035.3371250-1-jiawenwu@trustnetic.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sriov does not need to init pptable from amdgpu driver
we finish it from PF

Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

test ib function is not necessary on hw ring,
so remove it.

v2: squash in NULL check fix

Signed-off-by: JesseZhang <Jesse.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently amdgpu calls drm_sched_fini() from the fence driver sw fini
routine - such function is expected to be called only after the
respective init function - drm_sched_init() - was executed successfully.

Happens that we faced a driver probe failure in the Steam Deck
recently, and the function drm_sched_fini() was called even without
its counter-part had been previously called, causing the following oops:

amdgpu: probe of 0000:04:00.0 failed with error -110
BUG: kernel NULL pointer dereference, address: 0000000000000090
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 609 Comm: systemd-udevd Not tainted 6.2.0-rc3-gpiccoli #338
Hardware name: Valve Jupiter/Jupiter, BIOS F7A0113 11/04/2022
RIP: 0010:drm_sched_fini+0x84/0xa0 [gpu_sched]
[...]
Call Trace:
 <TASK>
 amdgpu_fence_driver_sw_fini+0xc8/0xd0 [amdgpu]
 amdgpu_device_fini_sw+0x2b/0x3b0 [amdgpu]
 amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
 devm_drm_dev_init_release+0x49/0x70
 [...]

To prevent that, check if the drm_sched was properly initialized for a
given ring before calling its fini counter-part.

Notice ideally we'd use sched.ready for that; such field is set as the latest
thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such
field - in the above oops for example, it was a GFX ring causing the crash, and
the sched.ready field was set to true in the ring init routine, regardless of
the state of the DRM scheduler. Hence, we ended-up using sched.ops as per
Christian's suggestion [0], and also removed the no_scheduler check [1].

[0] https://lore.kernel.org/amd-gfx/984ee981-2906-0eaf-ccec-9f80975cb136@amd.com/
[1] https://lore.kernel.org/amd-gfx/cd0e2994-f85f-d837-609f-7056d5fb7231@amd.com/

Fixes: 067f44c8

 ("drm/amdgpu: avoid over-handle of fence driver fini in s3 test (v2)")
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The pid field corresponds to the result of gettid() in userspace.
However, userspace cannot reliably attribute PTE events to processes
with just the thread id. This patch allows userspace to easily
attribute PTE update events to specific processes by comparing this
field with the result of getpid().

For attributing events to specific threads, the thread id is also
contained in the common fields of each trace event.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

These can support unique_id, so create the sysfs file for them

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

This can suppress the warning caused by version mismatch.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

This can suppress the warning caused by version mismatch.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

Add missing GetPptLimit message mapping.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

Saeed Mahameed says:

====================
mlx5 fixes 2023-02-07

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Serialize module cleanup with reload and remove
  net/mlx5: fw_tracer, Zero consumer index when reloading the tracer
  net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffers
  net/mlx5: Expose SF firmware pages counter
  net/mlx5: Store page counters in a single array
  net/mlx5e: IPoIB, Show unknown speed instead of error
  net/mlx5e: Fix crash unsetting rx-vlan-filter in switchdev mode
  net/mlx5: Bridge, fix ageing of peer FDB entries
  net/mlx5: DR, Fix potential race in dr_rule_create_rule_nic
  net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change
====================

Link: https://lore.kernel.org/r/20230208030302.95378-1-saeed@kernel.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cursor gets clipped off in the middle of the screen with hw rotation
180. Fix a miscalculation of cursor offset when it's placed near the
edges in the pipe split case.

Cursor bugs with hw rotation were reported on AMD issue tracker:
https://gitlab.freedesktop.org/drm/amd/-/issues/2247

The issues on rotation 270 was fixed by:
https://lore.kernel.org/amd-gfx/20221118125935.4013669-22-Brian.Chang@amd.com/


that partially addressed the rotation 180 too. So, this patch is the
final bits for rotation 180.

Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 9d84c7ef

 ("drm/amd/display: Correct cursor position on horizontal mirror")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

enable athub cg on gc 11.0.3

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 9aa15370

.

This is fixed now so we can re-enable S/G display on DCN
3.1.4.

Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

Take into account whether or not the AGP aperture is
enabled or not when calculating the system aperture.

Fixes white screens with DCN 3.1.4.

Based on a patch from Yifan Zhang <yifan1.zhang@amd.com>

Cc: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352


Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352


Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

iproute2 does not recognize the "group6" and "remote6" keywords. Fix by
using "group" and "remote" instead.

Before:

 # ./test_vxlan_vnifiltering.sh
 [...]
 Tests passed:  25
 Tests failed:   2

After:

 # ./test_vxlan_vnifiltering.sh
 [...]
 Tests passed:  27
 Tests failed:   0

Fixes: 3edf5f66

 ("selftests: add new tests for vxlan vnifiltering")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230207141819.256689-1-idosch@nvidia.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Turns out modern (icl+) VBTs still declare their DSI ports
as MIPI-A and MIPI-C despite the PHYs now being A and B.
Remap appropriately to allow the panels declared as MIPI-C
to work.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016


Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207064337.18697-2-ville.syrjala@linux.intel.com


Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 118b5c13

)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Matthieu Baerts says:

====================
mptcp: fixes for v6.2

Patch 1 clears resources earlier if there is no more reasons to keep
MPTCP sockets alive.

Patches 2 and 3 fix some locking issues visible in some rare corner
cases: the linked issues should be quite hard to reproduce.

Patch 4 makes sure subflows are correctly cleaned after the end of a
connection.

Patch 5 and 6 improve the selftests stability when running in a slow
environment by transfering data for a longer period on one hand and by
stopping the tests when all expected events have been observed on the
other hand.

All these patches fix issues introduced before v6.2.
====================

Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

These 'endpoint' tests from 'mptcp_join.sh' selftest start a transfer in
the background and check the status during this transfer.

Once the expected events have been recorded, there is no reason to wait
for the data transfer to finish. It can be stopped earlier to reduce the
execution time by more than half.

For these tests, the exchanged data were not verified. Errors, if any,
were ignored but that's fine, plenty of other tests are looking at that.
It is then OK to mute stderr now that we are sure errors will be printed
(and still ignored) because the transfer is stopped before the end.

Fixes: e274f715

 ("selftests: mptcp: add subflow limits test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

A test-case is frequently failing on some extremely slow VMs.
The mptcp transfer completes before the script is able to do
all the required PM manipulation.

Address the issue in the simplest possible way, making the
transfer even more slow.

Additionally dump more info in case of failures, to help debugging
similar problems in the future and init dump_stats var.

Fixes: e274f715 ("selftests: mptcp: add subflow limits test-cases")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/323


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>