- Nov 16, 2022
-
-
Vladimir Oltean authored
In the initial commit dc452a47 ("net: dsa: introduce tagger-owned storage for private and shared data"), we had a call to tag_ops->disconnect(dst) issued from dsa_tree_free(), which is called at tree teardown time. There were problems with connecting to a switch tree as a whole, so this got reworked to connecting to individual switches within the tree. In this process, tag_ops->disconnect(ds) was made to be called only from switch.c (cross-chip notifiers emitted as a result of dynamic tag proto changes), but the normal driver teardown code path wasn't replaced with anything. Solve this problem by adding a function that does the opposite of dsa_switch_setup_tag_protocol(), which is called from the equivalent spot in dsa_switch_teardown(). The positioning here also ensures that we won't have any use-after-free in tagging protocol (*rcv) ops, since the teardown sequence is as follows: dsa_tree_teardown -> dsa_tree_teardown_master -> dsa_master_teardown -> unsets master->dsa_ptr, making no further packets match the ETH_P_XDSA packet type handler -> dsa_tree_teardown_ports -> dsa_port_teardown -> dsa_slave_destroy -> unregisters DSA net devices, there is even a synchronize_net() in unregister_netdevice_many() -> dsa_tree_teardown_switches -> dsa_switch_teardown -> dsa_switch_teardown_tag_protocol -> finally frees the tagger-owned storage Fixes: 7f297314 ("net: dsa: make tagging protocols connect to individual switches from a tree") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Saeed Mahameed <saeed@kernel.org> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221114143551.1906361-1-vladimir.oltean@nxp.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Wei Yongjun authored
x25_lapb_receive_frame() using skb_copy() to get a private copy of skb, the new skb should be freed in the undersized/fragmented skb error handling path. Otherwise there is a memory leak. Fixes: cb101ed2 ("x25: Handle undersized/fragmented skbs") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20221114110519.514538-1-weiyongjun@huaweicloud.com Signed-off-by:
-
Liu Jian authored
If ag71xx_hw_enable() fails, call phylink_disconnect_phy() to clean up. And if phylink_of_phy_connect() fails, nothing needs to be done. Compile tested only. Fixes: 892e0915 ("net: ag71xx: port to phylink") Signed-off-by:
Liu Jian <liujian56@huawei.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221114095549.40342-1-liujian56@huawei.com Signed-off-by:
-
- Nov 15, 2022
-
-
Ido Schimmel authored
The bridge driver can offload VLANs to the underlying hardware either via switchdev or the 8021q driver. When the former is used, the VLAN is marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV' private flag. To avoid the memory leaks mentioned in the cited commit, the bridge driver will try to delete a VLAN via the 8021q driver if the VLAN is not marked with the previously mentioned flag. When the VLAN protocol of the bridge changes, switchdev drivers are notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but the 8021q driver is also called to add the existing VLANs with the new protocol and delete them with the old protocol. In case the VLANs were offloaded via switchdev, the above behavior is both redundant and buggy. Redundant because the VLANs are already programmed in hardware and drivers that support VLAN protocol change (currently only mlx5) change the protocol upon the switchdev attribute notification. Buggy because the 8021q driver is called despite these VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to memory leaks [1] when the VLANs are deleted. Fix by not calling the 8021q driver for VLANs that were already programmed via switchdev. [1] unreferenced object 0xffff8881f6771200 (size 256): comm "ip", pid 446855, jiffies 4298238841 (age 55.240s) hex dump (first 32 bytes): 00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000012819ac>] vlan_vid_add+0x437/0x750 [<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920 [<000000000632b56f>] br_changelink+0x3d6/0x13f0 [<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0 [<00000000f6276baf>] rtnl_newlink+0x5f/0x90 [<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00 [<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340 [<0000000010588814>] netlink_unicast+0x438/0x710 [<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40 [<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0 [<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0 [<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0 [<00000000684f7e25>] __sys_sendmsg+0xab/0x130 [<000000004538b104>] do_syscall_64+0x3d/0x90 [<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 27973793 ("net: bridge: Fix VLANs memory leak") Reported-by:Vlad Buslov <vladbu@nvidia.com> Tested-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20221114084509.860831-1-idosch@nvidia.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Hao Lan says: ==================== net: hns3: This series bugfix for the HNS3 ethernet driver. This series includes some bugfix for the HNS3 ethernet driver. Patch 1# fix incorrect hw rss hash type of rx packet. Fixes: 79664077 ("net: hns3: support RXD advanced layout") Fixes: 232fc64b ("net: hns3: Add HW RSS hash information to RX skb") Fixes: ea485867 ("net: hns3: handle the BD info on the last BD of the packet") Patch 2# fix return value check bug of rx copybreak. Fixes: e74a726d ("net: hns3: refactor hns3_nic_reuse_page()") Fixes: 99f6b5fb ("net: hns3: use bounce buffer when rx page can not be reused") Patch 3# net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process Fixes: f5f2b3e4 ("net: hns3: add support for imp-controlled PHYs") Fixes: c5ef83cb ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config") Fixes: 2312e050 ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo") ==================== Link: https://lore.kernel.org/r/20221114082048.49450-1-lanhao@huawei.com Signed-off-by:
-
Guangbin Huang authored
Currently, if driver is in phy-imp(phy controlled by imp firmware) mode, as driver did not update phy link ksettings after initialization process or not update advertising when getting phy link ksettings from firmware, it may set incorrect phy link ksettings for firmware in resetting process. So fix it. Fixes: f5f2b3e4 ("net: hns3: add support for imp-controlled PHYs") Fixes: c5ef83cb ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config") Fixes: 2312e050 ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo") Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Hao Lan <lanhao@huawei.com> Signed-off-by:
-
Jie Wang authored
The refactoring of rx copybreak modifies the original return logic, which will make this feature unavailable. So this patch fixes the return logic of rx copybreak. Fixes: e74a726d ("net: hns3: refactor hns3_nic_reuse_page()") Fixes: 99f6b5fb ("net: hns3: use bounce buffer when rx page can not be reused") Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
-
Jian Shen authored
Currently, the HNS3 driver reports the rss hash type of each packet based on the rss hash tuples set. It always reports PKT_HASH_TYPE_L4, without checking the type of current packet. It's incorrect. Fixes it by reporting it base on the packet type. Fixes: 79664077 ("net: hns3: support RXD advanced layout") Fixes: 232fc64b ("net: hns3: Add HW RSS hash information to RX skb") Fixes: ea485867 ("net: hns3: handle the BD info on the last BD of the packet") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Aminuddin Jamaluddin authored
Sleep time is added to ensure the phy to be ready after loopback bit was set. This to prevent the phy loopback test from failing. Fixes: 020a45af ("net: phy: marvell: add Marvell specific PHY loopback") Cc: <stable@vger.kernel.org> # 5.15.x Signed-off-by:
Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by:
Aminuddin Jamaluddin <aminuddin.jamaluddin@intel.com> Link: https://lore.kernel.org/r/20221114065302.10625-1-aminuddin.jamaluddin@intel.com Signed-off-by:
-
Yuan Can authored
The ena_init() won't destroy workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Yuan Can <yuancan@huawei.com> Acked-by:
Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20221114025659.124726-1-yuancan@huawei.com Signed-off-by:
-
Cong Wang authored
sk->sk_receive_queue is protected by skb queue lock, but for KCM sockets its RX path takes mux->rx_lock to protect more than just skb queue. However, kcm_recvmsg() still only grabs the skb queue lock, so race conditions still exist. We can teach kcm_recvmsg() to grab mux->rx_lock too but this would introduce a potential performance regression as struct kcm_mux can be shared by multiple KCM sockets. So we have to enforce skb queue lock in requeue_rx_msgs() and handle skb peek case carefully in kcm_wait_data(). Fortunately, skb_recv_datagram() already handles it nicely and is widely used by other sockets, we can just switch to skb_recv_datagram() after getting rid of the unnecessary sock lock in kcm_recvmsg() and kcm_splice_read(). Side note: SOCK_DONE is not used by KCM sockets, so it is safe to get rid of this check too. I ran the original syzbot reproducer for 30 min without seeing any issue. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Reported-by:
<syzbot+278279efdd2730dd14bf@syzkaller.appspotmail.com> Reported-by:
shaozhengchao <shaozhengchao@huawei.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20221114005119.597905-1-xiyou.wangcong@gmail.com Signed-off-by:
-
Yuan Can authored
A problem about ionic create debugfs failed is triggered with the following log given: [ 415.799514] debugfs: Directory 'ionic' with parent '/' already present! The reason is that ionic_init_module() returns ionic_bus_register_driver() directly without checking its return value, if ionic_bus_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ionic can never be created later. ionic_init_module() ionic_debugfs_create() # create debugfs directory ionic_bus_register_driver() pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when ionic_bus_register_driver() returns error. Fixes: fbfb8031 ("ionic: Add hardware init and device commands") Signed-off-by:Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221113092929.19161-1-yuancan@huawei.com Signed-off-by:
-
Amit Cohen authored
FDB entries that perform VXLAN encapsulation with an IPv6 underlay hold a reference on a resource - the KVDL entry where the IPv6 underlay destination IP is stored. For that, the driver maintains two hash tables: 1. Maps IPv6 to KVDL index 2. Maps {MAC, FID index} to IPv6 address When a FDB entry is removed, the second table is used to find the relevant IPv6 address and the first table is used to remove the reference count and free the index if is not used anymore. In order for a packet to be forwarded to a single remote VTEP, FDB entries need to be configured at both the bridge and VXLAN devices' FDB tables. Both entries are squashed into one {MAC, VLAN/VNI} -> IP entry in the hardware. Therefore, in case one entry is removed, the entry will be removed from the hardware and the remaining entry will be unmarked with 'offload' flag since it is not offloaded anymore. For example, the two FDB entries should be added to allow packets to be forwarded via vx10: $ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff self static dst 2001:db8:5::1 $ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff master static vlan 10 When one entry will be removed, the second one will not be offloaded anymore. When the first entry (in VXLAN FDB) will be removed / will not be offloaded anymore, the two mappings in IPv6 hash tables will be removed. In case that the second entry is removed before the first one, unexpected warnings[1][2] will be shown in user space as a result of removing the first entry. The issue is that not offloaded entry is removed, the driver tries to search the relevant entries in the hash tables, does not find them and therefore warns. Do not handle removing of not offloaded VXLAN FDB entries, as they were already removed when the offload flag was removed. [1]: WARNING: CPU: 1 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c:914 mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum] ... Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum] RIP: 0010:mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum] ... Call Trace: <TASK> mlxsw_sp_port_fdb_tunnel_uc_op+0x6cf/0x7b0 [mlxsw_spectrum] mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum] ? finish_task_switch.isra.0+0x8c/0x290 process_one_work+0x1cd/0x390 worker_thread+0x48/0x3c0 ? process_one_work+0x390/0x390 kthread+0xe0/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> [2]: WARNING: CPU: 0 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3035 mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum] ... Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum] RIP: 0010:mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum] ... Call Trace: <TASK> ? mlxsw_sp_port_fdb_tun_uc_op6_sfd_write+0x5c1/0x610 [mlxsw_spectrum] mlxsw_sp_port_fdb_tunnel_uc_op+0x6ec/0x7b0 [mlxsw_spectrum] mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum] ? finish_task_switch.isra.0+0x8c/0x290 process_one_work+0x1cd/0x390 worker_thread+0x48/0x3c0 ? process_one_work+0x390/0x390 kthread+0xe0/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: 0860c764 ("mlxsw: spectrum_nve: Keep track of IPv6 addresses used by FDB entries") Signed-off-by:Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/c186de8cbd28e3eb661e06f31f7f2f2dff30020f.1668184350.git.petrm@nvidia.com Signed-off-by:
-
- Nov 14, 2022
-
-
Vladimir Oltean authored
There are multi-generational drivers like mv88e6xxx which have code like this: int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr) { if (!chip->info->ptp_support) return -EOPNOTSUPP; ... } DSA wants to deny PTP timestamping on the master if the switch supports timestamping too. However it currently relies on the presence of the port_hwtstamp_get() callback to determine PTP capability, and this clearly does not work in that case (method is present but returns -EOPNOTSUPP). We should not deny PTP on the DSA master for those switches which truly do not support hardware timestamping. Create a dsa_port_supports_hwtstamp() method which actually probes for support by calling port_hwtstamp_get() and seeing whether that returned -EOPNOTSUPP or not. Fixes: f685e609 ("net: dsa: Deny PTP on master if switch supports it") Link: https://patchwork.kernel.org/project/netdevbpf/patch/20221110124345.3901389-1-festevam@gmail.com/ Reported-by:Fabio Estevam <festevam@gmail.com> Reported-by:
Steffen Bätz <steffen@innosonix.de> Signed-off-by:
Fabio Estevam <festevam@denx.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch calls free_netdev() to fix it since netdev_priv is used after unregister. Fixes: 13adac03 ("net: mhi_net: Register wwan_ops for link creation") Signed-off-by:
-
David S. Miller authored
Ziyang Xuan says: ==================== octeon_ep: fix several bugs in exception paths Find several obvious bugs during code review in exception paths. Provide this patchset to fix them. Not tested, just compiled. ==================== Signed-off-by: -
Ziyang Xuan authored
octep_get_mac_addr() can fail because send mbox message failed. If this happens, octep_dev->mac_addr will be zero. It should not continue to initialize. Add exception handling for octep_get_mac_addr() to fix it. Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
-
Ziyang Xuan authored
When occur unsupported_dev and mbox init errors, it did not free oct->conf and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem. Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under unsupported_dev and mbox init errors to fix the problem. Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization") Signed-off-by:
-
Ziyang Xuan authored
octep_get_link_status() can fail because send mbox message failed, then octep_get_link_status() will return ret less than 0. Excute octep_link_up() as long as ret is not equal to 0 in octep_open() now. That is not correct. The value type of link.state is enum octep_ctrl_net_state. Positive value represents up. Excute octep_link_up() when ret is bigger than 0. Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization") Signed-off-by:
-
Ziyang Xuan authored
octep_napi_add() and octep_napi_enable() are all after netif_set_real_num_{tx,rx}_queues() in octep_open(), so it is unnecessary napi rollback under set_queues_err. Delete them to fix it. Fixes: 37d79d05 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: -
Gaosheng Cui authored
When pci_register_driver failed, we need to remove debugfs, which will caused a resource leak, fix it. Resource leak logs as follows: [ 52.184456] debugfs: Directory 'bnxt_en' with parent '/' already present! Fixes: cabfb09d ("bnxt_en: add debugfs support for DIM") Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Zhengchao Shao authored
When connecting to client timeout, disconnect client for twice in chnl_net_open(). Remove one. Compile tested only. Fixes: 2aa40aef ("caif: Use link layer MTU instead of fixed MTU") Signed-off-by:
-
Chuang Wang authored
hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to hlist_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled. Execute as follow: ip link add link eth0 type macvlan mode source macaddr add <MAC-ADDR> The rtnl_lock is held when macvlan_hash_lookup_source() or macvlan_fill_info_macaddr() are called in the non-RCU read side section. So, pass lockdep_rtnl_is_held() to silence false lockdep warning. Fixes: 79cf79ab ("macvlan: add source mode") Signed-off-by:
Chuang Wang <nashuiliang@gmail.com> Signed-off-by:
-
Wang ShaoBo authored
We should not release reference by put_device() before calling device_initialize(). Fixes: e7d1d4d9 ("mISDN: fix possible memory leak in mISDN_register_device()") Signed-off-by:
Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by:
-
Zhengchao Shao authored
When liquidio driver open failed, it doesn't release resources. Compile tested only. Fixes: 5b07aee1 ("liquidio: MSIX support for CN23XX") Fixes: dbc97bfd ("net: liquidio: Add missing null pointer checks") Signed-off-by:
-
- Nov 12, 2022
-
-
Jeremy Kerr authored
We're currently hitting the WARN_ON in mctp_i2c_flow_release: if (midev->release_count > midev->i2c_lock_count) { WARN_ONCE(1, "release count overflow"); This may be hit if we expire a flow before sending the first packet it contains - as we will not be pairing the increment of release_count (performed on flow release) with the i2c lock operation (only performed on actual TX). To fix this, only release a flow if we've encountered it previously (ie, dev_flow_state does not indicate NEW), as we will mark the flow as ACTIVE at the same time as accounting for the i2c lock operation. We also need to add an INVALID flow state, to indicate when we've done the release. Fixes: f5b8abf9 ("mctp i2c: MCTP I2C binding driver") Reported-by:Jian Zhang <zhangjian.3032@bytedance.com> Tested-by:
Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20221110053135.329071-1-jk@codeconstruct.com.au Signed-off-by:
-
Yu Liao authored
'aead_req' and 'aead_send' is allocated but not freed in default switch case. This commit fixes the potential memory leak by freeing them under the situation. Note that the default cases here should never be reached as they'd mean we allowed offloading an unsupported algorithm. Fixes: ea7a9d88 ("net/tls: Use cipher sizes structs") Signed-off-by:
Yu Liao <liaoyu15@huawei.com> Reviewed-by:
Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20221110090329.2036382-1-liaoyu15@huawei.com Signed-off-by:
-
Mohd Faizal Abdul Rahim authored
When stmmac_xdp_release() is called, there is a possibility that tx function is still running on other queues which will lead to tx queue timed out and reset adapter. This commit ensure that tx function is not running xdp before release flow continue to run. Fixes: ac746c85 ("net: stmmac: enhance XDP ZC driver level switching performance") Signed-off-by:
Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by:
Mohd Faizal Abdul Rahim <faizal.abdul.rahim@intel.com> Signed-off-by:
Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com> Link: https://lore.kernel.org/r/20221110064552.22504-1-noor.azura.ahmad.tarmizi@linux.intel.com Signed-off-by:
-
Michael Sit Wei Hong authored
Current driver code will read device tree node information, and set default values if there is no info provided. This is not done in non-OF devices leading to SGMII fifo depths being set to the smallest size. This patch sets the value to the default value of the PHY as stated in the PHY datasheet. Fixes: 4dc08dcc ("net: phy: dp83867: introduce critical chip default init for non-of platform") Signed-off-by:
Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221110054938.925347-1-michael.wei.hong.sit@intel.com Signed-off-by:
-
Yuan Can authored
A problem about hinic create debugfs failed is triggered with the following log given: [ 931.419023] debugfs: Directory 'hinic' with parent '/' already present! The reason is that hinic_module_init() returns pci_register_driver() directly without checking its return value, if pci_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of hinic can never be created later. hinic_module_init() hinic_dbg_register_debugfs() # create debugfs directory pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when pci_register_driver() returns error. Fixes: 253ac3a9 ("hinic: add support to query sq info") Signed-off-by: -
Yang Yingliang authored
Afer commit 1fa5ae85 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, use put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. The 'entry' is going to be freed in mISDN_dsp_dev_release(), so the kfree() is removed. list_del() is called in mISDN_dsp_dev_release(), so it need be initialized. Fixes: 1fa5ae85 ("driver core: get rid of struct device's bus_id string array") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221109132832.3270119-1-yangyingliang@huawei.com Signed-off-by:
-
Wei Yongjun authored
netdev is allocated in bgmac_alloc() with devm_alloc_etherdev() and will be auto released in ->remove and ->probe failure path. Using free_netdev() in bgmac_enet_remove() leads to double free. Fixes: 34a5102c ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Andrii Nakryiko says: ==================== bpf 2022-11-11 We've added 11 non-merge commits during the last 8 day(s) which contain a total of 11 files changed, 83 insertions(+), 74 deletions(-). The main changes are: 1) Fix strncpy_from_kernel_nofault() to prevent out-of-bounds writes, from Alban Crequy. 2) Fix for bpf_prog_test_run_skb() to prevent wrong alignment, from Baisong Zhong. 3) Switch BPF_DISPATCHER to static_call() instead of ftrace infra, with a small build fix on top, from Peter Zijlstra and Nathan Chancellor. 4) Fix memory leak in BPF verifier in some error cases, from Wang Yufen. 5) 32-bit compilation error fixes for BPF selftests, from Pu Lehui and Yang Jihong. 6) Ensure even distribution of per-CPU free list elements, from Xu Kuohai. 7) Fix copy_map_value() to track special zeroed out areas properly, from Xu Kuohai. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix offset calculation error in __copy_map_value and zero_map_value bpf: Initialize same number of free nodes for each pcpu_freelist selftests: bpf: Add a test when bpf_probe_read_kernel_str() returns EFAULT maccess: Fix writing offset in case of fault in strncpy_from_kernel_nofault() selftests/bpf: Fix test_progs compilation failure in 32-bit arch selftests/bpf: Fix casting error when cross-compiling test_verifier for 32-bit platforms bpf: Fix memory leaks in __check_func_call bpf: Add explicit cast to 'void *' for __BPF_DISPATCHER_UPDATE() bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace) bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop") bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb() ==================== Link: https://lore.kernel.org/r/20221111231624.938829-1-andrii@kernel.org Signed-off-by:
-
Xu Kuohai authored
Function __copy_map_value and zero_map_value miscalculated copy offset, resulting in possible copy of unwanted data to user or kernel. Fix it. Fixes: cc487558 ("bpf: Add zero_map_value to zero map value with special fields") Fixes: 4d7d7f69 ("bpf: Adapt copy_map_value for multiple offset case") Signed-off-by:
Xu Kuohai <xukuohai@huawei.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/20221111125620.754855-1-xukuohai@huaweicloud.com
-
Xu Kuohai authored
pcpu_freelist_populate() initializes nr_elems / num_possible_cpus() + 1 free nodes for some CPUs, and then possibly one CPU with fewer nodes, followed by remaining cpus with 0 nodes. For example, when nr_elems == 256 and num_possible_cpus() == 32, CPU 0~27 each gets 9 free nodes, CPU 28 gets 4 free nodes, CPU 29~31 get 0 free nodes, while in fact each CPU should get 8 nodes equally. This patch initializes nr_elems / num_possible_cpus() free nodes for each CPU firstly, then allocates the remaining free nodes by one for each CPU until no free nodes left. Fixes: e19494ed ("bpf: introduce percpu_freelist") Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20221110122128.105214-1-xukuohai@huawei.com
-
Andrii Nakryiko authored
Alban Crequy says: ==================== Hi, This is v2 of the fix & selftest previously sent at: https://lore.kernel.org/linux-mm/20221108195211.214025-1-flaniel@linux.microsoft.com/ Changes v1 to v2: - add 'cc:stable', 'Fixes:' and review/ack tags - update commitmsg and fix my email - rebase on bpf tree and tag for bpf tree Thanks! ==================== Signed-off-by:
-
Alban Crequy authored
This commit tests previous fix of bpf_probe_read_kernel_str(). The BPF helper bpf_probe_read_kernel_str should return -EFAULT when given a bad source pointer and the target buffer should only be modified to make the string NULL terminated. bpf_probe_read_kernel_str() was previously inserting a NULL before the beginning of the dst buffer. This test should ensure that the implementation stays correct for now on. Without the fix, this test will fail as follows: $ cd tools/testing/selftests/bpf $ make $ sudo ./test_progs --name=varlen ... test_varlen:FAIL:check got 0 != exp 66 Signed-off-by:
Alban Crequy <albancrequy@linux.microsoft.com> Signed-off-by:
Francis Laniel <flaniel@linux.microsoft.com> Signed-off-by:
-
Alban Crequy authored
If a page fault occurs while copying the first byte, this function resets one byte before dst. As a consequence, an address could be modified and leaded to kernel crashes if case the modified address was accessed later. Fixes: b58294ea ("maccess: allow architectures to provide kernel probing directly") Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8] Link: https://lore.kernel.org/bpf/20221110085614.111213-2-albancrequy@linux.microsoft.com
-
- Nov 11, 2022
-
-
Jaco Coetzee authored
Extend the size of QSFP EEPROM for types SSF8436 and SFF8636 from 256 to 640 bytes in order to expose all the EEPROM pages by ethtool. For SFF-8636 and SFF-8436 specifications, the driver exposes 256 bytes of EEPROM data for ethtool's get_module_eeprom() callback, resulting in "netlink error: Invalid argument" when an EEPROM read with an offset larger than 256 bytes is attempted. Changing the length enumerators to the _MAX_LEN variants exposes all 640 bytes of the EEPROM allowing upper pages 1, 2 and 3 to be read. Fixes: 96d971e3 ("ethtool: Add fallback to get_module_eeprom from netlink command") Signed-off-by:
Jaco Coetzee <jaco.coetzee@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wifi, can and bpf. Current release - new code bugs: - can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet Previous releases - regressions: - bpf, sockmap: fix the sk->sk_forward_alloc warning - wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit() - can: af_can: fix NULL pointer dereference in can_rx_register() - can: dev: fix skb drop check, avoid o-o-b access - nfnetlink: fix potential dead lock in nfnetlink_rcv_msg() Previous releases - always broken: - bpf: fix wrong reg type conversion in release_reference() - gso: fix panic on frag_list with mixed head alloc types - wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker() - wifi: mac80211: set TWT Information Frame Disabled bit as 1 - eth: macsec offload related fixes, make sure to clear the keys from memory - tun: fix memory leaks in the use of napi_get_frags - tun: call napi_schedule_prep() to ensure we own a napi - tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent - ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network - tipc: fix a msg->req tlv length check - sctp: clear out_curr if all frag chunks of current msg are pruned, avoid list corruption - mctp: fix an error handling path in mctp_init(), avoid leaks" * tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) eth: sp7021: drop free_netdev() from spl2sw_init_netdev() MAINTAINERS: Move Vivien to CREDITS net: macvlan: fix memory leaks of macvlan_common_newlink ethernet: tundra: free irq when alloc ring failed in tsi108_open() net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open() ethernet: s2io: disable napi when start nic failed in s2io_card_up() net: atlantic: macsec: clear encryption keys from the stack net: phy: mscc: macsec: clear encryption keys when freeing a flow stmmac: dwmac-loongson: fix missing of_node_put() while module exiting stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe() stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open() mctp: Fix an error handling path in mctp_init() stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz net: cxgb3_main: disable napi when bind qsets failed in cxgb_up() net: cpsw: disable napi in cpsw_ndo_open() iavf: Fix VF driver counting VLAN 0 filters ice: Fix spurious interrupt during removal of trusted VF net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions net/mlx5e: E-Switch, Fix comparing termination table instance ...
-
