There is issue as follows when test f2fs atomic write:
F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock
F2FS-fs (loop0): invalid crc_offset: 0
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=1, run fsck to fix.
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix.
==================================================================
BUG: KASAN: null-ptr-deref in f2fs_get_dnode_of_data+0xac/0x16d0
Read of size 8 at addr 0000000000000028 by task rep/1990

CPU: 4 PID: 1990 Comm: rep Not tainted 5.19.0-rc6-next-20220715 #266
Call Trace:
 <TASK>
 dump_stack_lvl+0x6e/0x91
 print_report.cold+0x49a/0x6bb
 kasan_report+0xa8/0x130
 f2fs_get_dnode_of_data+0xac/0x16d0
 f2fs_do_write_data_page+0x2a5/0x1030
 move_data_page+0x3c5/0xdf0
 do_garbage_collect+0x2015/0x36c0
 f2fs_gc+0x554/0x1d30
 f2fs_balance_fs+0x7f5/0xda0
 f2fs_write_single_data_page+0xb66/0xdc0
 f2fs_write_cache_pages+0x716/0x1420
 f2fs_write_data_pages+0x84f/0x9a0
 do_writepages+0x130/0x3a0
 filemap_fdatawrite_wbc+0x87/0xa0
 file_write_and_wait_range+0x157/0x1c0
 f2fs_do_sync_file+0x206/0x12d0
 f2fs_sync_file+0x99/0xc0
 vfs_fsync_range+0x75/0x140
 f2fs_file_write_iter+0xd7b/0x1850
 vfs_write+0x645/0x780
 ksys_write+0xf1/0x1e0
 do_syscall_64+0x3b/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

As 3db1de0e commit changed atomic write way which new a cow_inode for
atomic write file, and also mark cow_inode as FI_ATOMIC_FILE.
When f2fs_do_write_data_page write cow_inode will use cow_inode's cow_inode
which is NULL. Then will trigger null-ptr-deref.
To solve above issue, introduce FI_COW_FILE flag for COW inode.

Fiexes: 3db1de0e

("f2fs: change the current atomic write way")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

F2FS_IOC_ABORT_VOLATILE_WRITE was used to abort a atomic write before.
However it was removed accidentally. So revive it by changing the name,
since volatile write had gone.

Signed-off-by: Daeho Jeong <daehojeong@google.com>
Fiexes: 7bc155fe

("f2fs: kill volatile write support")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

As Wenqing Liu <wenqingliu0120@gmail.com> reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=216285



RIP: 0010:memcpy_erms+0x6/0x10
 f2fs_update_meta_page+0x84/0x570 [f2fs]
 change_curseg.constprop.0+0x159/0xbd0 [f2fs]
 f2fs_do_replace_block+0x5c7/0x18a0 [f2fs]
 f2fs_replace_block+0xeb/0x180 [f2fs]
 recover_data+0x1abd/0x6f50 [f2fs]
 f2fs_recover_fsync_data+0x12ce/0x3250 [f2fs]
 f2fs_fill_super+0x4459/0x6190 [f2fs]
 mount_bdev+0x2cf/0x3b0
 legacy_get_tree+0xed/0x1d0
 vfs_get_tree+0x81/0x2b0
 path_mount+0x47e/0x19d0
 do_mount+0xce/0xf0
 __x64_sys_mount+0x12c/0x1a0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is segment type is invalid, so in f2fs_do_replace_block(),
f2fs accesses f2fs_sm_info::curseg_array with out-of-range segment type,
result in accessing invalid curseg->sum_blk during memcpy in
f2fs_update_meta_page(). Fix this by adding sanity check on segment type
in build_sit_entries().

Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

After commit a7eeb823

 ("f2fs: use bitmap in discard_entry"),
MAX_DISCARD_BLOCKS became obsolete, remove it.

Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

As Dipanjan Das <mail.dipanjan.das@gmail.com> reported, syzkaller
found a f2fs bug as below:

RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295
Call Trace:
 write_all_xattrs fs/f2fs/xattr.c:487 [inline]
 __f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743
 f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790
 f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86
 __vfs_setxattr+0x115/0x180 fs/xattr.c:182
 __vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216
 __vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277
 vfs_setxattr+0x13f/0x330 fs/xattr.c:303
 setxattr+0x146/0x160 fs/xattr.c:611
 path_setxattr+0x1a7/0x1d0 fs/xattr.c:630
 __do_sys_lsetxattr fs/xattr.c:653 [inline]
 __se_sys_lsetxattr fs/xattr.c:649 [inline]
 __x64_sys_lsetxattr+0xbd/0x150 fs/xattr.c:649
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

NAT entry and nat bitmap can be inconsistent, e.g. one nid is free
in nat bitmap, and blkaddr in its NAT entry is not NULL_ADDR, it
may trigger BUG_ON() in f2fs_new_node_page(), fix it.

Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

If the inode has the compress flag, it will fail to use
'chattr -c +m' to remove its compress flag and tag no compress flag.
However, the same command will be successful when executed again,
as shown below:

  $ touch foo.txt
  $ chattr +c foo.txt
  $ chattr -c +m foo.txt
  chattr: Invalid argument while setting flags on foo.txt
  $ chattr -c +m foo.txt
  $ f2fs_io getflags foo.txt
  get a flag on foo.txt ret=0, flags=nocompression,inline_data

Fix this by removing some checks in f2fs_setflags_common()
that do not affect the original logic. I go through all the
possible scenarios, and the results are as follows. Bold is
the only thing that has changed.

+---------------+-----------+-----------+----------+
|               |            file flags            |
+ command       +-----------+-----------+----------+
|               | no flag   | compr     | nocompr  |
+---------------+-----------+-----------+----------+
| chattr +c     | compr     | compr     | -EINVAL  |
| chattr -c     | no flag   | no flag   | nocompr  |
| chattr +m     | nocompr   | -EINVAL   | nocompr  |
| chattr -m     | no flag   | compr     | no flag  |
| chattr +c +m  | -EINVAL   | -EINVAL   | -EINVAL  |
| chattr +c -m  | compr     | compr     | compr    |
| chattr -c +m  | nocompr   | *nocompr* | nocompr  |
| chattr -c -m  | no flag   | no flag   | no flag  |
+---------------+-----------+-----------+----------+

Link: https://lore.kernel.org/linux-f2fs-devel/20220621064833.1079383-1-chaoliu719@gmail.com/
Fixes: 4c8ff709

 ("f2fs: support data compression")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Chao Liu <liuchao@coolpad.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

introduce the below 4 new sysfs node for atomic write statistics.
- current_atomic_write: the total current atomic write block count,
                        which is not committed yet.
- peak_atomic_write: the peak value of total current atomic write block
                     count after boot.
- committed_atomic_block: the accumulated total committed atomic write
                          block count after boot.
- revoked_atomic_block: the accumulated total revoked atomic write block
                        count after boot.

Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs_gc returns -EINVAL via f2fs_balance_fs when there is enough free
secs after write checkpoint, but with gc_merge enabled, it will cause
the sleep time of gc thread to be set to no_gc_sleep_time even if there
are many dirty segments can be selected.

Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

After commit e3b49ea3

 ("f2fs: invalidate META_MAPPING before
IPU/DIO write"), invalidate_mapping_pages() will be called to
avoid race condition in between IPU/DIO and readahead for GC.

However, readahead flow is only used for post_read required inode,
so this patch adds check condition to avoids unnecessary page cache
invalidating for non-post_read inode.

Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Files created by truncate(1) have a size but no blocks, so
they can be allowed to enable compression.

Signed-off-by: Chao Liu <liuchao@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

When converting inode to compressed one via ioctl, it needs to check
inline_data, since inline_data flag and compressed flag are incompatible.

Fixes: 4c8ff709

 ("f2fs: support data compression")
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

f2fs_copy_page() is a wrapper around two kmap() + one memcpy() from/to
the mapped pages. It unnecessarily duplicates a kernel API and it makes
use of kmap(), which is being deprecated in favor of kmap_local_page().

Two main problems with kmap(): (1) It comes with an overhead as mapping
space is restricted and protected by a global lock for synchronization and
(2) it also requires global TLB invalidation when the kmap’s pool wraps
and it might block when the mapping space is fully utilized until a slot
becomes available.

With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Therefore, its
use in __clone_blkaddrs() is safe and should be preferred.

Delete f2fs_copy_page() and use a plain memcpy_page() in the only one
site calling the removed function. memcpy_page() avoids open coding two
kmap_local_page() + one memcpy() between the two kernel virtual addresses.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Quoted from commit e3b49ea3 ("f2fs: invalidate META_MAPPING before
IPU/DIO write")

"
Encrypted pages during GC are read and cached in META_MAPPING.
However, due to cached pages in META_MAPPING, there is an issue where
newly written pages are lost by IPU or DIO writes.

Thread A - f2fs_gc()            Thread B
/* phase 3 */
down_write(i_gc_rwsem)
ra_data_block()       ---- (a)
up_write(i_gc_rwsem)
                                f2fs_direct_IO() :
                                 - down_read(i_gc_rwsem)
                                 - __blockdev_direct_io()
                                 - get_data_block_dio_write()
                                 - f2fs_dio_submit_bio()  ---- (b)
                                 - up_read(i_gc_rwsem)
/* phase 4 */
down_write(i_gc_rwsem)
move_data_block()     ---- (c)
up_write(i_gc_rwsem)

(a) In phase 3 of f2fs_gc(), up-to-date page is read from storage and
    cached in META_MAPPING.
(b) In thread B, writing new data by IPU or DIO write on same blkaddr as
    read in (a). cached page in META_MAPPING become out-dated.
(c) In phase 4 of f2fs_gc(), out-dated page in META_MAPPING is copied to
    new blkaddr. In conclusion, the newly written data in (b) is lost.

To address this issue, invalidating pages in META_MAPPING before IPU or
DIO write.
"

In previous commit, we missed to cover extent cache hit case, and passed
wrong value for parameter @end of invalidate_mapping_pages(), fix both
issues.

Fixes: 6aa58d8a ("f2fs: readahead encrypted block during GC")
Fixes: e3b49ea3

 ("f2fs: invalidate META_MAPPING before IPU/DIO write")
Cc: Hyeong-Jun Kim <hj514.kim@samsung.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch adds a sysfs entry showing the unusable space in a section
made by zone capacity.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch fixes counting unusable blocks set by zone capacity when
checking the valid block count in a section.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

In order to simplify the complicated per-zone capacity, let's support
only one capacity for entire zoned device.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Remove the redundant code and use local variant as the
argument directly. Make it more human-readable.

Signed-off-by: duguowei <duguowei@xiaomi.com>
[Jaegeuk Kim: make code neat]
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Introduce memory mode to supports "normal" and "low" memory modes.
"low" mode is to support low memory devices. Because of the nature of
low memory devices, in this mode, f2fs will try to save memory sometimes
by sacrificing performance. "normal" mode is the default mode and same
as before.

Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Otherwise, in image which doesn't support compression feature,
page_array_entry will be initialized w/o use.

Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Current error handling is at risk of page leaks. However, we dot't seek
any failure scenarios, just use f2fs_bug_on.

Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Let's try to flush dirty inode again to improve subtle i_blocks mismatch.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Switch f2fs over to the functions that are replacing
fscrypt_set_test_dummy_encryption().  Since f2fs hasn't been converted
to the new mount API yet, this doesn't really provide a benefit for
f2fs.  But it allows fscrypt_set_test_dummy_encryption() to be removed.

Also take the opportunity to eliminate an #ifdef.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Pull IIO driver fixes from Greg KH:
 "Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
  in his pull request to me, so I'll just quote it here below, as that's
  the only changes we have right now for the char-misc driver tree:

  testing:
      - Fix a missing MODULE_LICENSE() warning by restricting possible
        build configs.

  Various drivers:
      - Fix ordering of iio_get_trigger() being called before
        iio_trigger_register()

  adi,admv1014:
      - Fix dubious x & !y warning.

  adi,axi-adc:
      - Fix missing of_node_put() in error and normal paths.

  aspeed,adc:
      - Add missing of_node_put()

  fsl,mma8452:
      - Fix broken probing from device tree.
      - Drop check on return value of i2c write to device to cause reset
        as ACK will be missing (device reset before sending it).

  fsl,vf610:
      - Fix documentation of in_conversion_mode ABI.

  iio-trig-sysfs:
      - Ensure irq work has finished before freeing the trigger.

  invensense,mpu3050:
      - Disable regulators in error path.

  invensense,icm42600:
      - Fix collision of enum value of 0 with error path where 0 is no
        match.

  renesas,rzg2l_Adc:
      - Add missing fwnode_handle_put() in error path.

  rescale:
      - Fix a boolean logic bug for detection of raw + scale affecting
        an obscure corner case.

  semtech,sx9324:
      - Check return value of read of pin_defs

  st,stm32-adc:
      - Fix interaction across ADC instances for some supported devices.
      - Drop false spurious IRQ messages.
      - Fix calibration value handling. If we can't calibrate don't
        expose the vref_int channel.
      - Fix maximum clock rate for stm32pm15x

  ti,ads131e08:
      - Add missing fwnode_handle_put() in error paths.

  xilinx,ams:
      - Fix variable checked for error from platform_get_irq()

  x-powers,axp288:
      - Overide TS_PIN bias current for boards where it is not correctly
        initialized.

  yamaha,yas530:
      - Fix inverted check on calibration data being all zeros.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
  iio: accel: mma8452: ignore the return value of reset operation
  iio: adc: stm32: fix maximum clock rate for stm32mp15x
  iio: adc: stm32: fix vrefint wrong calibration value handling
  iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
  iio: adc: vf610: fix conversion mode sysfs node name
  iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
  iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
  iio:humidity:hts221: rearrange iio trigger get and register
  iio:chemical:ccs811: rearrange iio trigger get and register
  iio:accel:mxc4005: rearrange iio trigger get and register
  iio:accel:kxcjk-1013: rearrange iio trigger get and register
  iio:accel:bma180: rearrange iio trigger get and register
  iio: afe: rescale: Fix boolean logic bug
  iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
  iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
  iio: adc: stm32: Fix ADCs iteration in irq handler
  iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
  iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
  iio: trigger: sysfs: fix use-after-free on remove
  ...

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes and new device ids for 5.19-rc4
  for a few small reported issues. They include:

   - new usb-serial driver ids

   - MAINTAINERS file update to properly catch the USB dts files

   - dt-bindings fixes for reported build warnings

   - xhci driver fixes for reported problems

   - typec Kconfig dependancy fix

   - raw_gadget fuzzing fixes found by syzbot

   - chipidea driver bugfix

   - usb gadget uvc bugfix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: chipidea: udc: check request status before setting device address
  USB: gadget: Fix double-free bug in raw_gadget driver
  xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
  xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
  xhci: turn off port power in shutdown
  xhci: Keep interrupt disabled in initialization until host is running.
  USB: serial: option: add Quectel RM500K module support
  USB: serial: option: add Quectel EM05-G modem
  USB: serial: pl2303: add support for more HXN (G) types
  usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
  usb: gadget: uvc: fix list double add in uvcg_video_pump
  dt-bindings: usb: ehci: Increase the number of PHYs
  dt-bindings: usb: ohci: Increase the number of PHYs
  usb: gadget: Fix non-unique driver names in raw-gadget driver
  MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM
  USB: serial: option: add Telit LE910Cx 0x1250 composition

Merge tag 'loongarch-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Some bug fixes and a trivial cleanup"

* tag 'loongarch-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Make compute_return_era() return void
  LoongArch: Fix wrong fpu version
  LoongArch: Fix EENTRY/MERRENTRY setting in setup_tlb_handler()
  LoongArch: Fix sleeping in atomic context in setup_tlb_handler()
  LoongArch: Fix the _stext symbol address
  LoongArch: Fix the !THP build

Pull f2fs fixes from Jaegeuk Kim:
 "Some urgent fixes to avoid generating corrupted inodes caused by
  compressed and inline_data files.

  In addition, avoid a wrong error report which prevents a roll-forward
  recovery"

* tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: do not count ENOENT for error case
  f2fs: fix iostat related lock protection
  f2fs: attach inline_data after setting compression

compute_return_era() always returns 0, make it return void,
and then no need to check its return value for its callers.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

According to the configuration information accessible by the CPUCFG
instruction in LoongArch Reference Manual [1], FP_ver is stored in
bit [5: 3] of CPUCFG2, the current code to get fpu version is wrong,
use CPUCFG2_FPVERS to fix it.

[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html

Fixes: 628c3bb4

 ("LoongArch: Add boot and setup routines")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

setup_tlb_handler() is expected to set per-cpu exception handlers, but
it only set the TLBRENTRY successfully because of copy & paste errors,
so fix it.

Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Since setup_tlb_handler() is executed in atomic context, we should use
GFP_ATOMIC instead of GFP_KERNEL to alloc pages. Otherwise we will get
a "sleeping in atomic context" error:

[    0.013118] BUG: sleeping function called from invalid context at mm/page_alloc.c:5158
[    0.013126] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
[    0.013131] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19-rc3+ #1008 1a223086d14d07967cc427f15d52139422271360
[    0.013136] Hardware name: Loongson Loongson-3A5000-7A1000-1w-V0.1-CRB/Loongson-LS3A5000-7A1000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V2.0.04082-beta7 04/27
[    0.013140] Stack : 90000000015fc990 9000000100493c18 9000000000df3370 9000000100490000
[    0.013151]         9000000100493b50 0000000000000000 9000000100493b58 9000000001417ef0
[    0.013160]         900000000199e54e 0000000000000040 9000000100493c18 90000000015f7a98
[    0.013168]         ffffffffffffffff 6de72f8b42179d1e 9000000100403b80 90000000015f7890
[    0.013176]         0000000000000001 00000000fffff175 9000000000eb9860 9000000001530b4b
[    0.013184]         9000000000e99e60 0000000000000013 0000000006ecc000 0000000000000001
[    0.013193]         90000000015f7a98 9000000001417ef0 0000000000000004 0000000000000000
[    0.013201]         0000000000000cc0 0000000000000000 0000000000000001 90000000015fc990
[    0.013209]         9000000000217e74 9000000001603b6b 9000000000208640 0000000000000000
[    0.013217]         00000000000000b0 0000000000000004 0000000000000000 0000000000070000
[    0.013225]         ...
[    0.013229] Call Trace:
[    0.013230] [<9000000000208640>] show_stack+0x4c/0x14c
[    0.013240] [<9000000000df3370>] dump_stack_lvl+0x70/0xac
[    0.013246] [<9000000000270c8c>] ___might_sleep+0x104/0x124
[    0.013253] [<9000000000477e84>] __alloc_pages+0x240/0x464
[    0.013260] [<9000000000214214>] setup_tlb_handler+0x104/0x1e8
[    0.013265] [<9000000000214324>] tlb_init+0x2c/0x3c
[    0.013270] [<9000000000208b74>] per_cpu_trap_init+0xec/0x108
[    0.013275] [<9000000000202850>] cpu_probe+0x400/0x8a4
[    0.013279] [<900000000020d160>] start_secondary+0x5c/0x3d4

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

_stext means the start of .text section (see __is_kernel_text()), but we
put its definition in .ref.text by mistake. Fix it by defining it in the
vmlinux.lds.S.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Fix the !THP build by making pmd_pfn() available in all configurations.
Because pmd_pfn() is used in mm/page_vma_mapped.c whether or not THP is
configured.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull gpio fixes from Bartosz Golaszewski:

 - make the irqchip immutable in gpio-realtek-otto

 - fix error code propagation in gpio-winbond

 - fix device removing in gpio-grgpio

 - fix a typo in gpio-mxs which indicates the driver is for a different
   model

 - documentation fixes

 - MAINTAINERS file updates

* tag 'gpio-fixes-for-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mxs: Fix header comment
  gpio: Fix kernel-doc comments to nested union
  gpio: grgpio: Fix device removing
  gpio: winbond: Fix error code in winbond_gpio_get()
  gpio: realtek-otto: Make the irqchip immutable
  docs: driver-api: gpio: Fix filename mismatch
  MAINTAINERS: add include/dt-bindings/gpio to GPIO SUBSYSTEM

Pull mtd fixes from Miquel RAynal:
 "NAND controller fix:
   - gpmi: Fix busy timeout setting (wrong calculation)

  NAND chip driver fix:
   - Thoshiba: Revert the commit introducing support for a chip that
     might have been counterfeit"

* tag 'mtd/fixes-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: gpmi: Fix setting busy timeout setting
  Revert "mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash"

Pull spi fixes from Mark Brown:
 "A bunch of driver specific fixes, plus a fix for spi-mem's status
  polling for devices that use GPIO chip selects and a DT bindings
  examples fix that helps with the validation work"

* tag 'spi-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: rockchip: Unmask IRQ at the final to avoid preemption
  spi: dt-bindings: Fix unevaluatedProperties warnings in examples
  spi: spi-mem: Fix spi_mem_poll_status()
  spi: cadence: Detect transmit FIFO depth
  spi: spi-cadence: Fix SPI CS gets toggling sporadically

Merge tag 'regulator-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One fix for an incorrect device description for MP5496"

* tag 'regulator-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom_smd: correct MP5496 ranges

Pull regmap fixes from Mark Brown:
 "Two sets of fixes - one for things that were missed with the support
  for custom bulk I/O operations introduced in the last merge window,
  and another for some long standing issues with regmap-irq which affect
  a fairly small subset of devices"

* tag 'regmap-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Fix offset/index mismatch in read_sub_irq_data()
  regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips
  regmap: Wire up regmap_config provided bulk write in missed functions
  regmap: Make regmap_noinc_read() return -ENOTSUPP if map->read isn't set
  regmap: Re-introduce bulk read support check in regmap_bulk_read()

Pull iommu fixes from Joerg Roedel:

 - Add a new IOMMU mailing list to the MAINTAINERS file to prepare for
   the a list migration happening on July 5th. The old list needs to
   stay in place until the switch happens to guarantee seemless
   archiving of list email.

 - Fix compatible device-tree string for rcar-gen4 in Renesas IOMMU
   driver.

* tag 'iommu-fixes-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  MAINTAINERS: Add new IOMMU development mailing list
  iommu/ipmmu-vmsa: Fix compatible for rcar-gen4

Pull RISC-V fix from Palmer Dabbelt:

 - fix the T-Head memory type errata workaround to avoid behavior
   that is unsupported in the LLVM assembler

* tag 'riscv-for-linus-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix ALT_THEAD_PMA's asm parameters

Pull s390 fixes from Alexander Gordeev:

 - Fix perf stat accounting for cryptography counters when multiple
   events are installed concurrently.

 - Prevent installation of unsupported perf events for cryptography
   counters.

 - Treat perf events cpum_cf/CPU_CYCLES/ and cpu_cf/INSTRUCTIONS/
   identical to basic events CPU_CYCLES" and INSTRUCTIONS, since they
   address the same hardware.

 - Restore kcrash operation which was broken by commit 5d8de293
   ("vmcore: convert copy_oldmem_page() to take an iov_iter").

* tag 's390-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pai: Fix multiple concurrent event installation
  s390/pai: Prevent invalid event number for pai_crypto PMU
  s390/cpumf: Handle events cycles and instructions identical
  s390/crash: make copy_oldmem_page() return number of bytes copied
  s390/crash: add missing iterator advance in copy_oldmem_page()