The variable p is a data structure which is used by the driver core
internally and it is not expected that busses will be directly accessing
these driver core internal only data.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A control message reply may not be received if either a link reset has
occurred or disconnection is initiated by the FW.
In the both cases the client state will be set straight to DISCONNECTED
and the driver will wait till timeout.
Adding DISCONNECTED state in the waiting condition will release the
client from the stall.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Timeout on notify request is not a fatal condition, and actually
cleaning control queues will disrupt other control flows of the
same client.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When a message is received and amthif client is not in reading state
the message is ignored and left dangling in the queue. This may happen
after one of the amthif host connections is closed w/o completing the
reading. Another client will pick up a wrong message on next read
attempt which will lead to link reset.
To prevent this the driver has to properly discard the message when
amthif client is not in reading state.

Cc: <stable@vger.kernel.org> #4.2+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the case when disconnection is initiated from the FW
the driver is flushing items from the write control list while
iterating over it:

mei_irq_write_handler()
    list_for_each_entry_safe(ctrl_wr_list)         <-- outer loop
         mei_cl_irq_disconnect_rsp()
             mei_cl_set_disconnected()
                 mei_io_list_flush(ctrl_wr_list)   <-- destorying list

We move the list flushing to the completion routine.

Cc: <stable@vger.kernel.org> #4.2+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Global me_client_index is used only during the enumeration process and
can be effectively replaced by me_addr data from the last enumeration
response as we always enumerate clients in the increasing order.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If cldrv->probe() failed in mei_cl_device_probe(),
the mei module is left pinned.

The patch moves __module_get(THIS_MODULE) after cldrv->probe().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If devm_add_action() fails we are explicitly calling dma_unmap_single(),
pci_unmap_single() and kfree(). Lets use the helper
devm_add_action_or_reset() and return directly in case of error, as we
know that the cleanup function has been already called by the helper if
there was any error. At that same time remove the variable rc which
becomes unused now.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Simplify the logic that picks MMIO ranges by pulling out the
logic related to trying to lay frame buffer claim on top of where
the firmware placed the frame buffer.

Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Later in the boot sequence, we need to figure out which memory
ranges can be given out to various paravirtual drivers.  The
hyperv_fb driver should, ideally, be placed right on top of
the frame buffer, without some other device getting plopped on
top of this range in the meantime.  Recording this now allows
that to be guaranteed.

Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes vmbus_allocate_mmio() and vmbus_free_mmio() so
that when child paravirtual devices allocate memory-mapped I/O
space, they allocate it privately from a resource tree pointed
at by hyperv_mmio and also by the public resource tree
iomem_resource.  This allows the region to be marked as "busy"
in the private tree, but a "bridge window" in the public tree,
guaranteeing that no two bridge windows will overlap each other
but while also allowing the PCI device children of the bridge
windows to overlap that window.

One might conclude that this belongs in the pnp layer, rather
than in this driver.  Rafael Wysocki, the maintainter of the
pnp layer, has previously asked that we not modify the pnp layer
as it is considered deprecated.  This patch is thus essentially
a workaround.

Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A patch later in this series allocates child nodes
in this resource tree.  For that to work, this tree
needs to be sorted in ascending order.

Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch modifies all the callers of vmbus_mmio_allocate()
to call vmbus_mmio_free() instead of release_mem_region().

Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch introduces a function that reverses everything
done by vmbus_allocate_mmio().  Existing code just called
release_mem_region().  Future patches in this series
require a more complex sequence of actions, so this function
is introduced to wrap those actions.

Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In existing code, this tree of resources is created
in single-threaded code and never modified after it is
created, and thus needs no locking.  This patch introduces
a semaphore for tree access, as other patches in this
series introduce run-time modifications of this resource
tree which can happen on multiple threads.

Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement APIs for in-place consumption of vmbus packets. Currently, each
packet is copied and processed one at a time and as part of processing
each packet we potentially may signal the host (if it is waiting for
room to produce a packet).

These APIs help batched in-place processing of vmbus packets.
We also optimize host signaling by having a separate API to signal
the end of in-place consumption. With netvsc using these APIs,
on an iperf run on average I see about 20X reduction in checks to
signal the host.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for implementing APIs for in-place consumption of VMBUS
packets, movve some ring buffer functionality into hyperv.h

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for moving some ring buffer functionality out of the
vmbus driver, export the API for signaling the host.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the virt_xx barriers that have been defined for use in virtual machines.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the READ_ONCE macro to access variabes that can change asynchronously.
This is the recommended mechanism for dealing with "unsafe" compiler
optimizations.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce separate functions for estimating how much can be read from
and written to the ring buffer.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On the consumer side, we have interrupt driven flow management of the
producer. It is sufficient to base the signaling decision on the
amount of space that is available to write after the read is complete.
The current code samples the previous available space and uses this
in making the signaling decision. This state can be stale and is
unnecessary. Since the state can be stale, we end up not signaling
the host (when we should) and this can result in a hang. Fix this
problem by removing the unnecessary check. I would like to thank
Arseney Romanenko <arseneyr@microsoft.com> for pointing out this issue.

Also, issue a full memory barrier before making the signaling descision
to correctly deal with potential reordering of the write (read index)
followed by the read of pending_sz.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The drivers which depends on parport may sometimes try to iniitialize
and register with parport bus even before parport has actually
registered with the device layer.
The simplest solution is to mark the init function as subsys_initcall()
and load the parport before the other drivers loads.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Return statements at the end of void functions are useless.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@@
identifier f;
expression e;
@@
void f(...) {
<...
- return
  e;
...>
}
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

My static checker complains that we still use "mark" even when the
_scif_fence_mark() call fails so it can be uninitialized.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes randconfig build error reported at
https://lkml.org/lkml/2016/4/3/135

 by ensuring that
the VOP driver selects VIRTIO.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The MIC VOP driver does two successive reads from user space to read a
variable length data structure. Kernel memory corruption can result if
the data structure changes between the two reads. This patch disallows
the chance of this happening.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116651


Reported by: Pengfei Wang <wpengfeinudt@gmail.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'stm-for-greg-20160420' of git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-next

Alexander writes:

stm class/intel_th: Updates for 4.7

These are:
 * Intel TH/MSU: improved resource handling and releasing
 * Intel TH/MSU: rehashed locking around buffer accesses
 * Intel TH/outputs: better sysfs group handling
 * Intel TH, STM: various bugfixes and smaller improvements
 * Intel TH: added a PCI ID for Broxton-M SOC

This adds Intel(R) Trace Hub PCI ID for Broxton-M SOC.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>

We want the fixes in there to build off of for other dependant patches.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull device mapper fix from Mike Snitzer:
 "Fix for earlier 4.6-rc4 stable@ commit that introduced improper use of
  write lock in cmd_read_lock() -- due to cut-n-paste gone awry (and
  sparse didn't catch it)"

* tag 'dm-4.6-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache metadata: fix cmd_read_lock() acquiring write lock

Commit 9567366f ("dm cache metadata: fix READ_LOCK macros and
cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in
cmd_read_lock(), yet up_read() is used to release the lock in
READ_UNLOCK().  Fix it.

Fixes: 9567366f

 ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Samy <f.fallen45@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull char/misc fixes from Greg KH:
 "Here are some small char/misc driver fixes for 4.6-rc4.  Full details
  are in the shortlog, nothing major here.

  These have all been in linux-next for a while with no reported issues"

* tag 'char-misc-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: do not leak free page on kmalloc failure
  lkdtm: fix memory leak of base
  lkdtm: fix memory leak of val
  extcon: palmas: Drop stray IRQF_EARLY_RESUME flag

Pull misc fixes from Greg KH:
 "Here are three small fixes for 4.6-rc4.

  Two fix up some lz4 issues with big endian systems, and the remaining
  one resolves a minor debugfs issue that was reported.

  All have been in linux-next with no reported issues"

* tag 'driver-core-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  lib: lz4: cleanup unaligned access efficiency detection
  lib: lz4: fixed zram with lz4 on big endian machines
  debugfs: Make automount point inodes permanently empty

Pull USB driver fixes from Greg KH:
 "Here are some small USB fixes for 4.6-rc4.

  Mostly xhci fixes for reported issues, a UAS bug that has hit a number
  of people, including stable tree users, and a few other minor things.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: hcd: out of bounds access in for_each_companion
  USB: uas: Add a new NO_REPORT_LUNS quirk
  USB: uas: Limit qdepth at the scsi-host level
  doc: usb: Fix typo in gadget_multi documentation
  usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value
  xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
  usb: xhci: fix wild pointers in xhci_mem_cleanup
  usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys
  usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT
  xhci: resume USB 3 roothub first
  usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
  cdc-acm: fix crash if flushed with nothing buffered

Pull dmaengine fixes from Vinod Koul:
 "This time we have some odd fixes in hsu, edma, omap and xilinx.

  Usual fixes and nothing special"

* tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dw: fix master selection
  dmaengine: edma: special case slot limit workaround
  dmaengine: edma: Remove dynamic TPTC power management feature
  dmaengine: vdma: don't crash when bad channel is requested
  dmaengine: omap-dma: Do not suppress interrupts for memcpy
  dmaengine: omap-dma: Fix polled channel completion detection and handling
  dmaengine: hsu: correct use of channel status register
  dmaengine: hsu: correct residue calculation of active descriptor
  dmaengine: hsu: set HSU_CH_MTSR to memory width

Pull locking fixlet from Ingo Molnar:
 "Fixes a build warning on certain Kconfig combinations"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Fix print_collision() unused warning

Pull EFI fix from Ingo Molnar:
 "An arm64 boot crash fix"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping