- Dec 30, 2019
-
-
Chris Wilson authored
Mark the GT as wedged so that we are not tempted to use it prior to initialisation. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191229183153.3719869-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Assume that the HW starts off with tag 0 "active" and so avoid using tag 0 for our own first ELSP submission. Signed-off-by:
-
Chris Wilson authored
Set up the RING_MI_MODE in new contexts to clear the STOP_RING bit, just in case they find it still set after a reset (as they are the first contexts to be run). Signed-off-by:
-
Chris Wilson authored
In the selftests, we may feed very long lists of blocks to be freed on culmination of the tests. This coupled with kasan and other malloc-tracing can make the kmem_cache_free() operation time consuming, and doing many of those trigger soft lockup warnings. Break the list up with a cond_resched(). Signed-off-by:
-
Manasi Navare authored
While clearing the Ports ync mode enable and master select bits we need to clear the register completely instead of using disable masks v3: * Remove reg variable (Matt) v2: * Just write 0 to the reg (Ville) * Rebase Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Fixes: 51528afe ("drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence") Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191228031204.10189-3-manasi.d.navare@intel.com
-
Manasi Navare authored
Add an extra check before making master slave assignments for tiled displays to make sure we make these assignments only if all tiled connectors are present. If not then initialize the state to defaults so it does a normal non tiled modeset without transcoder port sync. v4: deafulat port sync values in prepare_cleared_state (Ville) v3: * Default master trans to INVALID to avoid pipe mismatch v2: * Rename icl_add_sync_mode_crtcs * Move this function just before .compute_config hook * Check if DP before master slave assignments (Ville) Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Manasi Navare authored
In case of tiled displays, all the tiles are linke dto each other for transcoder port sync. So in intel_atomic_check() we need to make sure that we add all the tiles to the modeset and if one of the tiles needs a full modeset then mark all other tiles for a full modeset. We also need to force modeset for all synced crtcs after fastset check. v6: * Add comments about why we do not call drm_atomic_helper_check_modeset (Matt) * Add FIXME for a corner case where tile info might vanish (Matt) v5: * Rebase v4: * Fix logic for modeset_synced_crtcs (Ville) v3: * Add tile checks only for Gen >11 v2: * Change crtc_state scope, remove tile_grp_id (Ville) * Use intel_connector_needs_modeset() (Ville) * Add modeset_synced_crtcs (Ville) * Make sure synced crtcs are forced full modeset after fastset check (Ville) Suggested-by:
-
Manasi Navare authored
In case of tiled displays, if we hotplug just one connector, fbcon currently just selects the preferred mode and if it is tiled mode then that becomes a problem if rest of the tiles are not present. So in the fbdev driver on hotplug when we probe the client modeset, if we dont find all the connectors for all tiles, then on a connector with one tile, just fallback to the first available non tiled mode to display over a single connector. On the hotplug of the consecutive tiled connectors, if the tiled mode no longer exists because of fbcon size limitation, then return no modes for consecutive tiles but retain the non tiled mode on the 0th tile. Use the same logic in case of connected boot case as well. This has been tested with Dell UP328K tiled monitor. v3: * Check Num tiled conns that are connected (Manasi) v2: * Set the modes on consecutive hotplugged tiles to no mode if tiled mode is pruned (Dave) v1: * Just handle the 1st connector hotplug case * v1 Reviewed-by:
Dave Airlie <airlied@redhat.com> Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5 Suggested-by:
-
Manasi Navare authored
DRM Fb driver expects multiple CRTCs if it sees connector->has_tile is set, but we need to handle tile support and look for multiple CRTCs only for the modes that match the tile size. The other modes should be able to be displayed without tile support or uisng single CRTC. This patch adds the check to match the tile size with requested mode to handle the tile support. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
- Dec 29, 2019
-
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts tigerlake to tgl where appropriate. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Acked-by:
Jani Nikula <jani.nikula@linux.intel.com> Acked-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts ivybridge to ivb where appropriate. Signed-off-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts broadwell to bdw where appropriate. Signed-off-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts ironlake to ilk where appropriate. Signed-off-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts icelake to icl where appropriate. Signed-off-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts cannonlake to cnl where appropriate. Signed-off-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts skylake to skl where appropriate. Signed-off-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts haswell to hsw where appropriate. Signed-off-by:
-
Lucas De Marchi authored
We are currently using a mix of platform name and acronym to name the functions. Let's prefer the acronym as it should be clear what platform it's about and it's shorter, so it doesn't go over 80 columns in a few cases. This converts pineview to pnv where appropriate. v2: Add missing conversions in intel_pm.c (Matt Roper). While at it, fix missing blank lines between structs that would otherwise trigger checkpatch errors (Lucas) Signed-off-by:
-
Lucas De Marchi authored
Drop the intel prefix since all these structs are static and prefer using the 3-letter prefix for each platform. v2: also remove gen from the device info (Ville) Signed-off-by:
-
Lukasz Fiedorowicz authored
Debugfs i915_gem_object is extended to enable the IGTs to detect the LMEM's availability and the total size of LMEM. v2: READ_ONCE is used [Chris] v3: %pa is used for printing the resource [Chris] v4: All regions' details added to debugfs [Chris] v5: Macro for_each_mem_region added name is initialized at region init [Chris] Signed-off-by:Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com> Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
- Dec 28, 2019
-
-
Chris Wilson authored
In commit d03b224f ("drm/i915/gt: Apply sanitiization just before resume") the GT sanitization was pulled into the resume path as we need to know the backend in order to do a full reset prior to resume. However, it is still imperative that we scrub existing GPU state before clobbering in our early setup, so restore a minimal GPU reset at the start of our init sequence. Fixes: d03b224f ("drm/i915/gt: Apply sanitiization just before resume") Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191228111255.3086901-1-chris@chris-wilson.co.uk
-
Matt Roper authored
Although the workaround number and description are the same, the vsunit clock gate disable bit has moved to a new register and location on gen12. Bspec: 52890 Bspec: 52758 Cc: stable@kernel.vger.org Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Matt Roper authored
Workaround database indicates we should disable clock gating of both the vsunit and hsunit. Bspec: 33450 Bspec: 33451 Cc: stable@kernel.vger.org Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Matt Roper authored
WaDisableDARBFClkGating, now known as Wa_14010480278, has been added to the workaround tables for ICL, EHL, and TGL so we need to extend our platform test accordingly. Bspec: 33450 Bspec: 33451 Bspec: 52890 Cc: stable@kernel.vger.org Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Chris Wilson authored
If gt initialisation failed, we are left with no engines to use for coherency testing. Currently we bug out, which makes the actual error, so fail more gracefully instead. Closes: https://gitlab.freedesktop.org/drm/intel/issues/896 Signed-off-by:
-
- Dec 27, 2019
-
-
Chris Wilson authored
Do not expose incomplete engines to the user after we fail to setup the GT. Fixes: e6ba7648 ("drm/i915: Remove i915->kernel_context") Signed-off-by:
-
- Dec 26, 2019
-
-
Chris Wilson authored
Bring sanitization completely underneath the umbrella of intel_gt, and perform it exclusively after suspend and before the next resume. Signed-off-by:
-
Chris Wilson authored
In record defaults, if we emit a request we expect a context switck on parking. We need take no further action, so don't even mess with the low level engine->serial where it is not warranted. Signed-off-by:
-
- Dec 25, 2019
-
-
Chris Wilson authored
Add a space between the prefixed format and the users format so that the join are not mistakenly combined into one long word. Fixes: 639f2f24 ("drm/i915: Introduce new macros for tracing") Signed-off-by:
-
- Dec 24, 2019
-
-
Tvrtko Ursulin authored
IDR internally uses xarray so we can use it directly which simplifies our code by removing the need to do external locking. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Chris Wilson authored
Our goal in wait_for_idle (intel_gt_retire_requests) is to the current workload *and* their idle barriers. This requires us to notice the late arrival of those, which is done by inspecting the list of active timelines. However, if a concurrent retirer is running that new timeline may not be added until after we drop the lock -- so flush concurrent retirers before we take the lock and inspect the list. Closes: https://gitlab.freedesktop.org/drm/intel/issues/878 Signed-off-by:
-
Pankaj Bharadiya authored
intel_bw_state allocated memory is not getting freed even after module removal. kmemleak reported backtrace: [<0000000079019739>] kmemdup+0x17/0x40 [<00000000d58c1b9d>] intel_bw_duplicate_state+0x1b/0x40 [i915] [<000000007423ed0c>] drm_atomic_get_private_obj_state+0xca/0x140 [<00000000100e3533>] intel_bw_atomic_check+0x133/0x350 [i915] [<00000000126d0e0c>] intel_atomic_check+0x1ab7/0x20d0 [i915] [<00000000d5dfc004>] drm_atomic_check_only+0x563/0x810 [<00000000c9379611>] drm_atomic_commit+0xe/0x50 [<00000000ec82b765>] drm_atomic_helper_disable_all+0x133/0x160 [<000000003c44760c>] drm_atomic_helper_shutdown+0x65/0xc0 [<00000000414e3e5c>] i915_driver_remove+0xcb/0x130 [i915] [<00000000f8544c2a>] i915_pci_remove+0x19/0x40 [i915] [<000000002dcbd148>] pci_device_remove+0x36/0xb0 [<000000003c8c6b0a>] device_release_driver_internal+0xe0/0x1c0 [<00000000580e9566>] unbind_store+0xc3/0x120 [<00000000869d0df5>] kernfs_fop_write+0x104/0x190 [<000000004dc1a355>] vfs_write+0xb9/0x1d0 Call the drm_atomic_private_obj_fini(), which inturn calls the intel_bw_destroy_state() to make sure the intel_bw_state memory is freed properly. Reviewed-by:Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191209143921.9240-1-pankaj.laxminarayan.bharadiya@intel.com
-
Chris Wilson authored
Use the status of the timeline request list as we retire it to determine if the timeline is still active. Signed-off-by:
-
José Roberto de Souza authored
This function is only called from port sync and it is identical to what will be executed again in intel_update_crtc() over port sync pipes. If it is really necessary at least it deserves a better name and a comment, leaving it to people working on port sync. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191223010654.67037-7-jose.souza@intel.com
-
José Roberto de Souza authored
MST master can not be disabled while it have attached MST slaves, so it is necessary force a modeset in all of its slaves. v3: - moved handling to intel_atomic_check() this way is guarantee that all pipes will have its state computed v4: - added a function to return if MST master neeeds modeset to simply code in intel_atomic_check() v5: - fixed and moved code to check if MST master needs a modeset v6: - previons version of this patch was split into two patches Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
MST and port sync have master and slaves pipes and it brings dependencies between pipes to allow fastset. For example if only MST master needs a modeset all of its slaves also needs to do a modeset. This patch adds the base for external dependencies check, the MST and port sync bits will be added in another patches. v3: - moved handling to intel_atomic_check() this way is guarantee that all pipes will have its state computed v4: - added a function to return if MST master neeeds modeset to simply code in intel_atomic_check() v5: - fixed and moved code to check if MST master needs a modeset v6: - previons version of this patch was split into two patches Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
José Roberto de Souza authored
The disable sequence after wait for transcoder off was not correctly implemented. The MST disable sequence is basically the same for HSW, SKL, ICL and TGL, with just minor changes for TGL. With this last patch we finally fixed the hotplugs triggered by MST sinks during the disable/enable sequence, those were causing source to try to do a link training while it was not ready causing CPU pipe FIFO underrrus on TGL. v2: Only unsetting TGL_TRANS_DDI_PORT_MASK for TGL on the post disable sequence v4: Rebased, moved MST sequences to intel_mst_post_disable_dp() BSpec: 4231 BSpec: 4163 BSpec: 22243 BSpec: 49190 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Due to DDB overlaps the pipe enabling sequence is not always crescent. As the previous patch selects the smallest pipe/transcoder in the MST stream to be master and it needs to be enabled first, this changes were needed to guarantee that. So first lets enable all pipes that do not need a fullmodeset as those don't have any external dependency and those are the ones that can overlap with each other. Then on the second loop it will enable all the pipes that needs a modeset and don't depends on other pipes like MST master pipe/transcoder. Then finally all the pipes that needs a modeset and have dependency on other pipes, that at this point are alread enabled. v3: rebased v4: - added check for modeset_pipes too to decide if is necessary for a wait a vblank - added DDB allocation overlap check for pipes that needs a modeset Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
José Roberto de Souza authored
On TGL the blending of all the streams have moved from DDI to transcoder, so now every transcoder working over the same MST port must send its stream to a master transcoder and master will send to DDI respecting the time slots. So here adding all the CRTCs that shares the same MST stream if needed and computing their state again, it will pick the lowest pipe/transcoder among the ones in the same stream to be master. Most of the time skl_commit_modeset_enables() enables pipes in a crescent order but due DDB overlapping it might not happen, this scenarios will be handled in the next patch. v2: - Using recently added intel_crtc_state_reset() to set mst_master_transcoder to invalid transcoder for all non gen12 & MST code paths - Setting lowest pipe/transcoder as master, previously it was the first one but setting a predictable one will help in future MST e port sync integration - Moving to intel type as much as we can v3: - Now intel_dp_mst_master_trans_compute() returns the MST master transcoder - Replaced stdbool.h by linux/types.h - Skip the connector being checked in intel_dp_mst_atomic_master_trans_check() - Using pipe instead of transcoder to compute MST master v4: - renamed connector_state to conn_state v5: - Improved the parameters of intel_dp_mst_master_trans_compute() to simply code - Added call drm_atomic_add_affected_planes() in intel_dp_mst_atomic_master_trans_check() as helper could not do it for us - Removed "if (ret)" left over from v3 changes v6: - handled ret == I915_MAX_PIPES case in compute BSpec: 50493 BSpec: 49190 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
intel_connector_needs_modeset() will be used outside of intel_display.c in a future patch so it would only be necessary to remove the state and add the prototype to the header file. But while at it, I simplified the arguments and moved it to a better place intel_atomic.c. No behavior changes intended here. v3: - removed digital from exported version of intel_connector_needs_modeset - rollback connector to drm type v4: - Renamed new_connector_state to new_conn_state - Going back to drm_connector_state in intel_encoders_update_prepare/complete as we also have intel_tv_connector_state Reviewed-by:
-
