- Jul 10, 2020
-
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200708194400.22213-1-grandmaster@al2klimov.de Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Colin Ian King authored
The error exit label out_free is no longer being used, it is redundant and can be removed. Cleans up warning: drivers/spi/spi-atmel.c:1680:1: warning: label ‘out_free’ defined but not used [-Wunused-label] Fixes: 2d9a7446 ("spi: atmel: No need to call spi_master_put() if spi_alloc_master() failed") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200709101203.1374117-1-colin.king@canonical.com Signed-off-by:
-
Marek Szyprowski authored
Use kthread_create_worker() helper to simplify the code. It uses the kthread worker API the right way. It will eventually allow to remove the FIXME in kthread_worker_fn() and add more consistency checks in the future. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200709065007.26896-1-m.szyprowski@samsung.com Signed-off-by:
-
- Jul 07, 2020
-
-
Mark Brown authored
Merge series "spi: spi-geni-qcom: Avoid a bunch of per-transfer overhead" from Douglas Anderson <dianders@chromium.org>: This series tries to reduce a whole bunch of overhead in each SPI transfer. Much of this overhead is new with the recent interconnect changes, but even without those changes we still had some overhead that we could avoid. Let's avoid all of it. These changes are atop the Qualcomm tree to avoid merge conflicts. If they look good, the most expedient way to land them is probably to get Ack's from Mark and land then via the Qualcomm tree. Most testing was done on the Chrome OS 5.4 tree, but sanity check was done on mainline. Douglas Anderson (3): spi: spi-geni-qcom: Avoid clock setting if not needed spi: spi-geni-qcom: Set an autosuspend delay of 250 ms spi: spi-geni-qcom: Get rid of most overhead in prepare_message() drivers/spi/spi-geni-qcom.c | 67 ++++++++++++++++++------------------- 1 file changed, 32 insertions(+), 35 deletions(-) -- 2.27.0.383.g050319c2ae-goog
-
Mark Brown authored
Merge series "spi: spi-sun6i: One fix and some improvements" from Marc Kleine-Budde <mkl@pengutronix.de>: Hello, this series first fixes the calculation of the clock rate. The driver will round up to the nearest clock rate instead of rounding down. Resulting in SPI devices accessed with a too high SPI clock. The remaining patches improve the performance of the driver. The changes range from micro-optimizations like reducing MMIO writes to the controller to reducing the number of needed interrupts in some use cases. regards, Marc changes since v1: - added Maxime Ripard's to the existing patches - 06/10: (was 05/10 in v1) "spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it" use FIELD_GET instead of open coding it (tnx: Maxime Ripard) - 05/10: "spi: spi-sun6i: sun6i_spi_get_tx_fifo_count: Convert manual shift+mask to FIELD_GET()" new patch _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-
Peng Fan authored
There is no need to call spi_master_put() if spi_alloc_master() failed, it should return -ENOMEM directly. Signed-off-by:
Peng Fan <fanpeng@loongson.cn> Link: https://lore.kernel.org/r/1594111842-9468-1-git-send-email-fanpeng@loongson.cn Signed-off-by:
-
Douglas Anderson authored
In commit 0e3b8a81 ("spi: spi-geni-qcom: Add interconnect support") the spi_geni_runtime_suspend() and spi_geni_runtime_resume() became a bit slower. Measuring on my hardware I see numbers in the hundreds of microseconds now. Let's use autosuspend to help avoid some of the overhead. Now if we're doing a bunch of transfers we won't need to be constantly chruning. The number 250 ms for the autosuspend delay was picked a bit arbitrarily, so if someone has measurements showing a better value we could easily change this. Fixes: 0e3b8a81 ("spi: spi-geni-qcom: Add interconnect support") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Akash <Asthana<akashast@codeaurora.org> Link: https://lore.kernel.org/r/20200701174506.2.I9b8f6bb1e7e6d8847e2ed2cf854ec55678db427f@changeid Signed-off-by:
-
Marc Kleine-Budde authored
In sun6i_spi_transfer_one() the RX FIFO Ready (SUN6I_INT_CTL_RF_RDY) is unconditionally enabled. A RX interrupt is only needed, if more data than fits into the FIFO is going to be received during this transfer. As the RX-FIFO is drained during transfer complete interrupt, enable the RX FIFO Ready interrupt only if the data doesn't fit into the FIFO. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200706143443.9855-11-mkl@pengutronix.de Signed-off-by:
-
Marc Kleine-Budde authored
In sun6i_spi_transfer_one() the Interrupt Control Register is written three times. This patch collates the three writes into one. Signed-off-by:
-
Marc Kleine-Budde authored
The function sun6i_spi_fill_fifo() is called with a length argument of "sspi->fifo_depth" and "SUN6I_FIFO_DEPTH". The driver reads the number of free bytes in the FIFO from the hardware and uses the length argument to limit this value. This is not needed as the number of free bytes in the FIFO is always less or equal the depth of the FIFO. This patch removes the length argument and check. Signed-off-by:
-
Marc Kleine-Budde authored
The function sun6i_spi_drain_fifo() is called with a length argument of "sspi->fifo_depth" and "SUN6I_FIFO_DEPTH". The driver reads the number of available bytes to read from the FIFO from the hardware and uses the length argument to limit this value. This is not needed as the FIFO can contain only the fifo depth number of bytes. This patch removes the length argument and check. Signed-off-by:
-
Marc Kleine-Budde authored
This patch introduces the function sun6i_spi_get_rx_fifo_count(), similar to the existing sun6i_spi_get_tx_fifo_count(), to make the sun6i_spi_drain_fifo() function a bit easier to read. Signed-off-by:
-
Marc Kleine-Budde authored
This patch converts the manual shift+mask in sun6i_spi_get_tx_fifo_count() to make use of FIELD_GET() Signed-off-by:
-
Marc Kleine-Budde authored
In sun6i_spi_transfer_one() the driver ensures that the length of the transfer is smaller or equal to SUN6I_MAX_XFER_SIZE. This means the masking of the length to SUN6I_MAX_XFER_SIZE can be skipped when writing the transfer length into the registers. This patch removes the useless masking of the transfer length to SUN6I_MAX_XFER_SIZE. Signed-off-by:
-
Marc Kleine-Budde authored
This patch removes an useless goto at the end of sun6i_spi_transfer_one(). Signed-off-by:
-
Marc Kleine-Budde authored
This patch implementes the reporting of the effectivly used speed_hz for the transfer by setting tfr->effective_speed_hz. See the following patch, which adds this feature to the SPI core for more information: 5d7e2b5e spi: core: allow reporting the effectivly used speed_hz for a transfer Signed-off-by:
-
- Jul 06, 2020
-
-
Marc Kleine-Budde authored
A SPI transfer defines the _maximum_ speed of the SPI transfer. However the driver doesn't take into account that the clock divider is always rounded down (due to integer arithmetics). This results in a too high clock rate for the SPI transfer. E.g.: with a mclk_rate of 24 MHz and a SPI transfer speed of 10 MHz, the original code calculates a reg of "0", which results in a effective divider of "2" and a 12 MHz clock for the SPI transfer. This patch fixes the issue by using DIV_ROUND_UP() instead of a plain integer division. While there simplify the divider calculation for the CDR1 case, use order_base_2() instead of two ilog2() calculations. Fixes: 3558fe90 ("spi: sunxi: Add Allwinner A31 SPI controller driver") Signed-off-by:
-
- Jul 02, 2020
-
-
Mark Brown authored
Merge series "Add Renesas RPC-IF support" from Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>: Hello! Here's a set of 2 patches against Linus' repo. Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or HyperFlash connected to the SoC to be accessed via the external address space read mode or the manual mode. The memory controller driver for RPC-IF registers either SPI or HyperFLash subdevice, depending on the contents of the device tree subnode; it also provides the abstract "back end" API that can be used by the "front end" SPI/MTD drivers to talk to the real hardware... Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>. [1/2] dt-bindings: memory: document Renesas RPC-IF bindings [2/2] memory: add Renesas RPC-IF driver MBR, Sergei
-
Mark Brown authored
Merge series "spi: bcm2835: Interrupt-handling optimisations" from Robin Murphy <robin.murphy@arm.com>: Hi all, Although Florian was concerned about a trivial inline check to deal with shared IRQs adding overhead, the reality is that it would be so small as to not be worth even thinking about unless the driver was already tuned to squeeze out every last cycle. And a brief look over the code shows that that clearly isn't the case. This is an example of some of the easy low-hanging fruit that jumps out just from code inspection. Based on disassembly and ARM1176 cycle timings, patch #2 should save the equivalent of 2-3 shared interrupt checks off the critical path in all cases, and patch #3 possibly up to about 100x more. I don't have any means to test these patches, let alone measure performance, so they're only backed by the principle that less code - and in particular fewer memory accesses - is almost always better. There is almost certainly a *lot* more to be had from careful use of relaxed I/O accessors, not doing a read-modify-write of CS at every reset, tweaking the loops further to avoid unnecessary writebacks to variables, and so on. However since I'm not invested in this personally I'm not going to pursue it any further; I'm throwing these patches out as more of a demonstration to back up my original drive-by review comments, so if anyone want to pick them up and run with them then please do so. Robin. Robin Murphy (3): spi: bcm3835: Tidy up bcm2835_spi_reset_hw() spi: bcm2835: Micro-optimise IRQ handler spi: bcm2835: Micro-optimise FIFO loops drivers/spi/spi-bcm2835.c | 45 +++++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 23 deletions(-) -- 2.23.0.dirty _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-
Linus Walleij authored
This switches the Lantiq SSC driver over to use GPIO descriptor handling in the core. The driver was already utilizing the core to look up and request GPIOs from the device tree so this is a pretty small change just switching it over to use descriptors directly instead. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20200625202149.209276-1-linus.walleij@linaro.org Signed-off-by:
-
Linus Walleij authored
This converts the IMG SPFI SPI driver to use GPIO descriptors as obtained from the core instead of GPIO numbers. The driver was already relying on the core code to look up the GPIO numbers from the device tree and allocate memory for storing state etc. By moving to use descriptors handled by the core we can delete the setup/cleanup functions and the device state handler that were only dealing with this. Signed-off-by:
-
Linus Walleij authored
The Nuvoton PSPI driver already uses the core to handle GPIO chip selects but is using the old GPIO number method and retrieveing the GPIOs in the probe() call. Switch it over to using GPIO descriptors saving a bunch of code and modernizing it. Compile tested med ARMv7 multiplatform config augmented with the Nuvoton arch and this driver. Signed-off-by:
-
Douglas Anderson authored
On some SPI controllers (like spi-geni-qcom) setting the chip select is a heavy operation. For instance on spi-geni-qcom, with the current code, is was measured as taking upwards of 20 us. Even on SPI controllers that aren't as heavy, setting the chip select is at least something like a MMIO operation over some peripheral bus which isn't as fast as a RAM access. While it would be good to find ways to mitigate problems like this in the drivers for those SPI controllers, it can also be noted that the SPI framework could also help out. Specifically, in some situations, we can see the SPI framework calling the driver's set_cs() with the same parameter several times in a row. This is specifically observed when looking at the way the Chrome OS EC SPI driver (cros_ec_spi) works but other drivers likely trip it to some extent. Let's solve this by caching the chip select state in the core and only calling into the controller if there was a change. We check not only the "enable" state but also the chip select mode (active high or active low) since controllers may care about both the mode and the enable flag in their callback. Signed-off-by:
-
Luc Van Oostenryck authored
The field mspi->reg_base is annotated as an __iomem pointer. Good. However, this field is often assigned to a temporary variable: before being used. For example: struct fsl_spi_reg *reg_base = mspi->reg_base; But this variable is missing the __iomem annotation. So, add the missing __iomem and make sparse & the bot happier. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Link: https://lore.kernel.org/r/20200622162611.83694-1-luc.vanoostenryck@gmail.com Signed-off-by:
-
Sergei Shtylyov authored
Add the memory driver for Renesas RPC-IF which registers either SPI or HyperFLash device depending on the contents of the device tree subnode. It also provides the absract "back end" device APIs that can be used by the "front end" SPI/MTD drivers to talk to the real hardware. Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/9a3606ec-d4d0-c63a-4fb6-631ab38e621c@cogentembedded.com Signed-off-by:
-
Sergei Shtylyov authored
Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or HyperFlash connected to the SoC to be accessed via the external address space read mode or the manual mode. Document the device tree bindings for the Renesas RPC-IF found in the R-Car gen3 SoCs. Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>. Signed-off-by:
-
Robin Murphy authored
The blind and counted loops are always called with nonzero count, so convert them to do-while loops that lead to slightly more efficient code generation. With GCC 8.3 this shaves off 1-2 instructions per iteration in each case. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/9242863077acf9a64e4b3720e479855b88d19e82.1592261248.git.robin.murphy@arm.com Signed-off-by:
-
Robin Murphy authored
The IRQ handler only needs the struct spi_controller for the sake of the completion at the end of a transfer. Passing the struct bcm2835_spi directly as the IRQ data allows that level of indirection to be pushed into the completion path for the reverse lookup, and avoided entirely in all other cases. This saves one explicit load in the critical path, plus (for a GCC 8.3 build) two registers worth of stack frame overhead. Signed-off-by:
-
Robin Murphy authored
It doesn't need a struct spi_controller, and every callsite has already retrieved the appropriate struct bcm2835_spi, so just pass that directly. Signed-off-by:
-
- Jul 01, 2020
-
-
leilk.liu authored
this patch use correct SPI_CFG2_REG offset. Signed-off-by:
leilk.liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20200701090020.7935-1-leilk.liu@mediatek.com Signed-off-by:
-
- Jun 30, 2020
-
-
Linus Walleij authored
The OMAP2 MCSPI has some kind of half-baked GPIO CS support: it includes code like this: if (gpio_is_valid(spi->cs_gpio)) { ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev)); (...) But it doesn't parse the "cs-gpios" attribute in the device tree to count the number of GPIOs or pick out the GPIO numbers and put these in the SPI master's .cs_gpios property. We complete the implementation of supporting CS GPIOs from the device tree and switch it over to use the SPI core for this. Signed-off-by:Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200625231257.280615-1-linus.walleij@linaro.org Signed-off-by:
-
Douglas Anderson authored
Setting the chip select on the Qualcomm geni SPI controller isn't exactly cheap. Let's cache the current setting and avoid setting the chip select if it's already right. Using "flashrom" to read or write the EC firmware on a Chromebook shows roughly a 25% reduction in interrupts and a 15% speedup. Signed-off-by:
-
- Jun 25, 2020
-
-
Jarkko Nikula authored
Add Intel Tiger Lake PCH-H PCI IDs. Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20200625140041.745804-1-jarkko.nikula@linux.intel.com Signed-off-by:
-
- Jun 24, 2020
-
-
Xu Yilun authored
Add the MODULE_DEVICE_TABLE macro for the platform_device_id table to allow proper creation of modalias strings and fix autoloading module for this driver. Signed-off-by:
Xu Yilun <yilun.xu@intel.com> Signed-off-by:
Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/1592962286-25752-3-git-send-email-yilun.xu@intel.com Signed-off-by:
-
Xu Yilun authored
The driver is expected to support device ID "spi_altera" for MMIO accessed devices, device ID "subdev_spi_altera" for indirect accessed devices. But the platform bus will not try driver name match anymore if the platform driver has an id_table. So the "spi_altera" should also be added to id_table. Signed-off-by:
-
- Jun 23, 2020
-
-
Robin Gong authored
Add fallback pio feature in case dma transfer failed before start. Besides, another whole pio transfer including setup_transfer will be issued by spi core, no need to restore jobs like commit bcd8e776 ("spi: imx: fallback to PIO if dma setup failure"). Signed-off-by:
Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1592347329-28363-3-git-send-email-yibin.gong@nxp.com Signed-off-by:
-
Robin Gong authored
Add fallback to pio mode in case dma transfer failed with error status SPI_TRANS_FAIL_NO_START. If spi client driver want to enable this feature please set xfer->error in the proper place such as dmaengine_prep_slave_sg() failure detect(but no any data put into spi bus yet). Besides, add master->fallback checking in its can_dma() so that spi core could switch to pio next time. Please refer to spi-imx.c. Signed-off-by:
-
- Jun 22, 2020
-
-
Mark Brown authored
To follow onto Doug's latest spi geni series[1] this simplifies and reduces the code a little more. [1] https://lore.kernel.org/r/20200618150626.237027-1-dianders@chromium.org Stephen Boyd (2): spi: spi-geni-qcom: Simplify setup_fifo_xfer() spi: spi-geni-qcom: Don't set {tx,rx}_rem_bytes unnecessarily drivers/spi/spi-geni-qcom.c | 55 +++++++++++++++++-------------------- 1 file changed, 25 insertions(+), 30 deletions(-) base-commit: 7ba9bdcb -- Sent by a computer, using git, on the internet
-
Stephen Boyd authored
We only need to test for these counters being non-zero when we see the end of a transfer. If we're doing a CS change then they will already be zero. This implies that we don't need to set these to 0 if we're cancelling an in flight transfer too, because we only care to test these counters when the 'DONE' bit is set in the hardware and we've set them to non-zero for a transfer. This is a non-functional change, just cleanup to consolidate code. Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Stephen Boyd authored
The definition of SPI_FULL_DUPLEX (3) is really SPI_TX_ONLY (1) ORed with SPI_RX_ONLY (2). Let's drop the define and simplify the code here a bit by collapsing the setting of 'm_cmd' into conditions that are the same. This is a non-functional change, just cleanup to consolidate code. Signed-off-by:
-
