- Jun 07, 2023
-
-
Pierre-Louis Bossart authored
The 'hda_disable_rewinds' kernel parameter is initialized with a non-existent CONFIG_SND_SOC_SOF_HDA_DISABLE_REWINDS. We probably forgot to clean this up when this Kconfig option was removed when upstreaming in 2021. Reported-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230606222529.57156-3-pierre-louis.bossart@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
The functionality described in Commit 61bef9e6 ("ASoC: SOF: Intel: hda: enforce exclusion between HDaudio and SoundWire") does not seem to be properly implemented with two issues that need to be corrected. a) The test used is incorrect when DisplayAudio codecs are not supported. b) Conversely when only Display Audio codecs can be found, we do want to start the SoundWire links, if any. That will help add the relevant topologies and machine descriptors, and identify cases where the SoundWire information in ACPI needs to be modified with a quirk. Signed-off-by:
-
- Jun 06, 2023
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: An unusually large set of patches to deal with new SoundWire-based platforms. The bulk of the patches addresses support for MTL using RT712, RT713, MAX98363, CS42L42 jack codec and amplifiers. The sof_sdw machine driver had to be updated to remove limitations on number of codecs per links, dai types, dai naming, etc. We also moved parts of the Realtek and Maxim support in common code to avoid duplication. Community users also reported two Dell SKUs which were not supported in the mainline due to hardware permutations.
-
Mark Brown authored
Merge series from Trevor Wu <trevor.wu@mediatek.com>: In the series, we extend the capability of mt8188-mt6359 driver. The following changes are included. 1. Divide ADDA BE dai into two dais for SOF. 2. Register hdmi/dp jack pins. 3. dai_fmt can be configured from device tree. 4. Add some I2S codecs support. In addition, new compatible string "mediatek,mt8188-nau8825" is included for a new board support.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset adds the changes required for the hda-dai extension to deal with SSSP/DMIC/SoundWire starting with LunarLake, as well as the new TLV IPC to provide the DMA stream_tag to the DSP firmware. LunarLake support for SSP/DMIC is ready but is gated by the patch "ASoC: SOF: Intel: shim: add enum for ACE 2.0 IP used in LunarLake" currently only present in the SoundWire tree.
-
- Jun 05, 2023
-
-
Pierre-Louis Bossart authored
The register changed with the HDaudio integration, the information is present in the extended link descriptor and not in the SHIM. Signed-off-by:
-
Pierre-Louis Bossart authored
Some functions can be used for newer LNL hardware. Signed-off-by:
-
Pierre-Louis Bossart authored
This patch adds a DMA config TLV structure and the relevant code to copy this TLV after the gateway configuration. For now this is an iso-functionality change, the TLVs are not configured just yet. Additional patches will be needed for DMIC/SSP/ALH (aka SoundWire). Signed-off-by:
-
Pierre-Louis Bossart authored
Starting with LunarLake, the DMIC/SSP/SoundWire audio interfaces will use the HDaudio DMA. This patch adds the DMA configuration structure to be passed as a TLV appended at the end of each gateway configuration. This patch only provides the definitions for now, the TLV will be added in the actual blobs separately for each interface. Signed-off-by:
-
Pierre-Louis Bossart authored
LunarLake introduces a new TLV blob passed to the firmware for DMA configuration. This TLV structure is directly inspired by the ALH multi-gateway structure used so far. This patch suggest a transition to the more abstract structure with no references to ALH. This is an iso-functionality redefinition of structure, the TLV will be added in a follow-up patch. Signed-off-by:
-
Pierre-Louis Bossart authored
The existing code for HDAudio DAIs cannot be extended to other types of DAIs, specific programming sequences need to be abstracted away. This patch hides the mechanism to determine the multi-link structure related to the DAI and program the LOSIDV register. An added benefit is that we can remove all references to the codec DAI from what should be a CPU dai configuration only. Signed-off-by:
-
Pierre-Louis Bossart authored
The existing code for HDAudio DAIs cannot be extended to other types of DAIs, specific programming sequences need to be abstracted away. This patch hides the stream format setup which is currently completely related to the HDaudio codec setup - not something that will work for other types of DAIs. Signed-off-by:
-
Pierre-Louis Bossart authored
The existing code for HDAudio DAIs cannot be extended to other types of DAIs, specific programming sequences need to be abstracted away. Start here with hiding the stream_tag needed by the HDAudio codec_dai. Signed-off-by:
-
Pierre-Louis Bossart authored
make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports several NULL pointer dereference paths. Example log: ops = hda_dai_get_ops(substream, cpu_dai); | | ^~~~~ | | | | | (14) return of NULL to ‘non_hda_dai_hw_params’ from ‘hda_dai_get_ops’ | 353 | sdev = widget_to_sdev(w); | 354 | hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream); | | ~~~~~~~~~~~~~~~~~~~~ | | | | | (15) dereference of NULL ‘ops’ The function hda_dai_get_ops() can return NULL, but the return value is not checked across the board. It's not a problem today, since we do check in the first use of the function, but static analysis tools are not aware of the different ALSA stages. Rather than argue forever, let's just add the error checks consistently and make sure this tool can be added to the CI checks. Signed-off-by:
-
Uday M Bhat authored
Add support to the following daughter card for rex: SDW0: CS42l42 Headset SDW2: MX98363 Speaker Reviewed-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Uday M Bhat <uday.m.bhat@intel.com> Signed-off-by:
-
Uday M Bhat authored
Add rex entry in the soundwire quirk table Reviewed-by:
-
Uday M Bhat authored
Add support for MAX98363 soundwire codec. Update build configuration to include this codec. Reviewed-by:
-
Uday M Bhat authored
Init function and structure names are modified to use maxim instead of max98373. Card components and speaker names are updated based on part id. Reviewed-by:
-
Uday M Bhat authored
This is needed to use the common implementation for other maxim soundwire codecs Reviewed-by:
-
Uday M Bhat authored
Helper functions added to support CS42l42 soundwire codec. Build configuration is updated to include this codec. Reviewed-by:
-
Terry Cheong authored
Boards were using this in older kernels before adl and rpl ids were split. Add this back to maintain support. Reviewed-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
Terry Cheong <htcheong@chromium.org> Signed-off-by:
-
Balamurugan C authored
Corrected the author name camel case and initial. Reviewed-by:
Balamurugan C <balamurugan.c@intel.com> Signed-off-by:
-
Balamurugan C authored
Moving amp only boards into end of the match table to have better order and maintenance. Reviewed-by:
-
Balamurugan C authored
Adding HDMI-In capture support for the products doesn't have onboard I2S codec.but need to support HDMI-In capture via I2S and audio playback through HDMI/DP monitor. Reviewed-by:
-
Pierre-Louis Bossart authored
This device has no 3.5mm jack, only a single amplifier and mic codec. Closes: https://github.com/thesofproject/linux/issues/4399 Reviewed-by:
-
Pierre-Louis Bossart authored
Yet another permutation of devices. Closes: https://github.com/thesofproject/linux/issues/4399 Reviewed-by:
-
Pierre-Louis Bossart authored
The SKU numbering isn't quite consistent with the existing RaptorLake SKUs but the PCI ID is definitively RaptorLake. Closes: https://github.com/thesofproject/linux/issues/4380 Reviewed-by:
-
Pierre-Louis Bossart authored
This is a standard configuration we've seen before for TGL. Closes: https://github.com/thesofproject/linux/issues/4380 Reviewed-by:
-
Bard Liao authored
To support multiple codecs per SoundWire link, we have to assign multiple CPU DAIs to different DAI links sharing the same physical link. This is not possible with the existing code since we assume that only 'Pin2' is used for playback and 'Pin3' used for capture - additional DAIs cannot be handled. This patch enables more CPU DAIs to be used, e.g. "SDW0 Pin2", "SDW0 Pin3", and "SDW0 Pin4" for SDW0-Playback-SimpleJack, SDW0-Capture-SimpleJack, and SDW0-Playback-SmartAmp DAI links on physical link #0. Reviewed-by:
-
Bard Liao authored
rt713 is rt712 but without amp. Reviewed-by:
-
Bard Liao authored
Add rt712 ID for MTL. Signed-off-by:
-
Bard Liao authored
Add rt712 ID for TGL. Signed-off-by:
-
Bard Liao authored
Rt712 is a multi function codec which shpports headset, amp, and dmic functions. Rt712 has two sdw interfaces and codec drivers, one for jack and amp, the other for dmic. part id 0x712 is for jack and amp, and 0x1712 is for dmic. Signed-off-by:
-
Bard Liao authored
Let rename rt711_sdca to rt_sdca_jack and let it be used for all Realtek sdca jacks. The commit uses component->name_prefix to construct card->components, and determine which codec it is. So, we have to set name_prefix properly. Signed-off-by:
-
Bard Liao authored
Jack Detection source can be applied to all jacks, not only rt711. No function changes. Signed-off-by:
-
Bard Liao authored
if (!SOF_RT711_JDSRC(sof_sdw_quirk)) is tested in rt711_sdca_add_codec_ device_props(), and we don't add software node to the device if jack source is not set. We need to do the same test in sof_sdw_rt711_sdca_exit(), and avoid removing software node if jack source is not set. Signed-off-by:
-
Bard Liao authored
A codec may support multiple dais for different purpose. For example, the rt712 codec supports jack and amp on different dais and machine driver needs to create different dailink for those dais. Reviewed-by:
-
Bard Liao authored
We append codec type to dailink name to distinguish different dailink on the same sdw link and direction. But we could create multi dailinks for a codec and the dailink name will be duplicated if we append codec type to the dailink name. Appending dai type instead of codec type can solve the issue. For example, if a codec supports JACK on dai 0 and AMP on dai 1, the existing code will create dailinks SDW0-Playback-SimpleJack or SDW0-Playback-SmartAmp for both dailinks, and it will be SDW0-Playback-SimpleJack for dailink 0 and SDW0-Playback-SmartAmp for dailink 1 after this change. Then codec type is not used any more and can be removed. Reviewed-by:
-
Bard Liao authored
codec_info_list[codec_index] is used multiple times in the create_sdw_dailink() function. Adding a codec_info pointer to shorten the code. This is a preparation for the following up patches. No function changed. Reviewed-by:
-
Bard Liao authored
Currently, we assign dailink ids in order, and shift with codec type. The purpose is to have consistent dailink ids for topologies. This can be simplified if we have a predefined dailink id in sof_sdw_dai_info. We reuse the existing ids as the predefine ids. So the dailink ids will not be changed by this commit. With this change, we no longer need to check the adr order described in a snd_soc_acpi_link_adr array. Reviewed-by:
-
