Some auto tests failed because driver wasn't returning the expected
error with some input size/iv value/tag size.
Now:
 Return 0 early for empty buffer. (We don't need to start the engine for
 an empty input buffer).
 Accept any valid authsize for gcm(aes).
 Return -EINVAL if iv for ccm(aes) is invalid.
 Return -EINVAL if buffer size is a not a multiple of algorithm block size.

Fixes: 9e054ec2

 ("crypto: stm32 - Support for STM32 CRYP crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Don't erase key:
If key is erased before the crypto_finalize_.*_request() call, some
pending process will run with a key={ 0 }.
Moreover if the key is reset at end of request, it breaks xts chaining
mode, as for last xts block (in case input len is not a multiple of
block) a new AES request is started without calling again set_key().

Fixes: 9e054ec2

 ("crypto: stm32 - Support for STM32 CRYP crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

STM32 CRYP hardware doesn't manage CTR counter bigger than max U32, as
a workaround, at each block the current IV is saved, if the saved IV
lower u32 is 0xFFFFFFFF, the full IV is manually incremented, and set
in hardware.
Fixes: bbb28326

 ("crypto: stm32 - Fix sparse warnings")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change driver to not print an error message when the device
probe is deferred for a clock resource.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change stm32 CRYP driver to defer its probe operation when
reset controller device is registered but has not been probed yet.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove a duplicate #include <linux/fips.h>.

Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If kstrtoint() fails then "lfs_num" is uninitialized and the warning
doesn't make any sense.  Just delete it.

Fixes: 8ec8015a

 ("crypto: octeontx2 - add support to process the crypto request")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the FIELD_PREP() helper, instead of open-coding the same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When caam queue is full (-ENOSPC), caam frees descriptor memory.
crypto-engine checks if retry support is true and h/w queue
is full(-ENOSPC), then requeue the crypto request.
During processing the requested descriptor again, caam gives below error.
(caam_jr 30902000.jr: 40000006: DECO: desc idx 0: Invalid KEY Command).

This patch adds a check to return when caam input ring is full
and retry support is true. so descriptor memory is not freed
and requeued request can be processed again.

Fixes: 2d653936

 ("crypto: caam - enable crypto-engine retry mechanism")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

On Dec 31 2023 NIST sunsets TDES for FIPS use. To prevent FIPS
validations to be completed in the future to be affected by the TDES
sunsetting, disallow TDES already now. Otherwise a FIPS validation would
need to be "touched again" end 2023 to handle TDES accordingly.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

FIPS disallows DH with keys < 2048 bits. Thus, the kernel should
consider the enforcement of this limit.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

FIPS disallows RSA with keys < 2048 bits. Thus, the kernel should
consider the enforcement of this limit.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The APT compares the current time stamp with a pre-set value. The
current code only considered the 4 LSB only. Yet, after reviews by
mathematicians of the user space Jitter RNG version >= 3.1.0, it was
concluded that the APT can be calculated on the 32 LSB of the time
delta. Thi change is applied to the kernel.

This fixes a bug where an AMD EPYC fails this test as its RDTSC value
contains zeros in the LSB. The most appropriate fix would have been to
apply a GCD calculation and divide the time stamp by the GCD. Yet, this
is a significant code change that will be considered for a future
update. Note, tests showed that constantly the GCD always was 32 on
these systems, i.e. the 5 LSB were always zero (thus failing the APT
since it only considered the 4 LSB for its calculation).

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some optimize for the calculation of qos shaper parameters.
and modify the comments.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1. Optimize overly long functions.
2. Fix the format symbol does not match the actual type.
3. Use the PCI_DEVFN to get the function id.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of qos should be reset after flr resetting or device
resetting. So set the max of qos value for every function. Then
update the value of qos when user writing the alg_qos.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Modify the value of type rate from new QM spec.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The kernel crypto API provides the SP800-108 counter KDF implementation.
Thus, the separate implementation provided as part of the keys subsystem
can be replaced with calls to the KDF offered by the kernel crypto API.

The keys subsystem uses the counter KDF with a hash primitive. Thus,
it only uses the call to crypto_kdf108_ctr_generate.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the specific code that adds a zero padding that was intended
to be invoked when the DH operation result was smaller than the
modulus. However, this cannot occur any more these days because the
function mpi_write_to_sgl is used in the code path that calculates the
shared secret in dh_compute_value. This MPI service function guarantees
that leading zeros are introduced as needed to ensure the resulting data
is exactly as long as the modulus. This implies that the specific code
to add zero padding is dead code which can be safely removed.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

SP800-108 defines three KDFs - this patch provides the counter KDF
implementation.

The KDF is implemented as a service function where the caller has to
maintain the hash / HMAC state. Apart from this hash/HMAC state, no
additional state is required to be maintained by either the caller or
the KDF implementation.

The key for the KDF is set with the crypto_kdf108_setkey function which
is intended to be invoked before the caller requests a key derivation
operation via crypto_kdf108_ctr_generate.

SP800-108 allows the use of either a HMAC or a hash as crypto primitive
for the KDF. When a HMAC primtive is intended to be used,
crypto_kdf108_setkey must be used to set the HMAC key. Otherwise, for a
hash crypto primitve crypto_kdf108_ctr_generate can be used immediately
after allocating the hash handle.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As a preparation to add the key derivation implementations, the
self-test data structure definition and the common test code is made
available.

The test framework follows the testing applied by the NIST CAVP test
approach.

The structure of the test code follows the implementations found in
crypto/testmgr.c|h. In case the KDF implementations will be made
available via a kernel crypto API templates, the test code is intended
to be merged into testmgr.c|h.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The Allwinner D1 SoC has a crypto engine compatible with sun8i-ce.
Add support for it.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Improve and simplify logging of PFVF messages.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

PFVF debug messages use a mix of zero and one based VF IDs.
Switch to zero based VF numbers in all log messages.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove min_iov_compat_ver field as for now all versions are compatible.

Compatibility is determined by a series of rules and dynamic conditions
such as specific configurations.
In any case the minimum version requirement for compatibility is
an inadequate and obsolete approach which should be removed.

At this time compatibility can be assured across the currently available
versions.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Refactor version handling logic for ADF_VF2PF_MSGTYPE_COMPAT_VER_REQ
and ADF_VF2PF_MSGTYPE_VERSION_REQ on the PF.
Response messages are now filled only after fully parsing the request,
in a consisted way with the rest of the PFVF codebase.

This patch also fixes a harmless double setting for VERSION in the
response for ADF_VF2PF_MSGTYPE_VERSION_REQ.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, any PF response to a VF request is fully parsed during the
interrupt handling. This way the individual response values are stored
into the accel_dev structure, preventing the caller to access and decode
the full response message itself.

Change this behavior, by letting the API return back the entire message
to the caller, in order to:
  - keep correlated code together, that is, the (building of the)
    request and the (decoding of the) response;
  - avoid polluting the accel_dev data structure with unnecessary and at
    times temporary values; only the entire message is stored in a
    temporary buffer.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace PFVF constants with enumerations for valid protocol codes.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Organize PFVF protocol definitions by type rather than direction, by
keeping related fields close.
Also, make sure the order is consistent for both PF and VF definitions.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Reorganize the structure of the PFVF code by moving the content of
adf_pf2vf_msg.c and adf_vf2pf_msg.c.

The logic that handles high level messages has been moved to
adf_pfvf_pf_msg.c and adf_pfvf_vf_msg.c.
The implementation of low level communication primitives and the
protocol is now included in adf_pfvf_pf_proto.c and adf_pfvf_vf_proto.c.

In addition, the file adf_pf2vf_msg.h has been renamed in adf_pfvf_msg.h
since it common to PF and VF and the copyright date for the touched
files has been updated.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Refactor the PFVF receive logic so it is common between PF and VF and
make it device specific.

This is in preparation for the introduction of PFVF support in the
qat_4xxx driver since the receive logic differs between QAT GEN2 and
QAT GEN4 devices.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Make the PFVF send function device specific.

This is in preparation for the introduction of PFVF support in the
qat_4xxx driver since the send logic differs between QAT GEN2 and
QAT GEN4 devices.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the function get_vf2pf_offset() to adf_pfvf_ops to differentiate the
CSRs used for pf2vf and vf2pf.

Offsets may or may not be direction specific depending on QAT
generation. Since in QAT GEN2 the CSR is not direction specific, i.e.
there is a single mailbox register shared for pf2vf and vf2pf, both
get_vf2pf_offset() and get_vf2pf_offset() will return the same offset.

This change is to make the direction explicit, so it is easier to
understand and debug and also in preparation for the introduction of
PFVF support in the qat_4xxx driver since QAT GEN4 devices have a
separate CSR for pf2vf and vf2pf communications.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add pfvf_ops structure to isolate PFVF related functions inside the
adf_hw_device_data structure.

For GEN2, the structure is populated using one of the two helper
functions, adf_gen2_init_pf_pfvf_ops() or adf_gen2_init_vf_pfvf_ops(),
for the PF and VF driver respectively.

For the DH895XCC PF driver, the structure is populated using
adf_gen2_init_pf_pfvf_ops() but some of the functions are then
overwritten.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move the function pfvf_comms_disabled() from the qat_4xxx module to
intel_qat as it will be used by other components to keep the PFVF
feature disabled.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move device specific PFVF logic related to the VF to the newly created
adf_gen2_pfvf.c.
This refactory is done to isolate the GEN2 PFVF code into its own file
in preparation for the introduction of support for PFVF for GEN4
devices.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move device specific PFVF logic related to the PF to the newly created
adf_gen2_pfvf.c.
This refactory is done to isolate the GEN2 PFVF code into its own file
in preparation for the introduction of support for PFVF for GEN4
devices.

In addition the PFVF PF logic for dh895xcc has been isolated to
adf_dh895xcc_hw_data.c.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rework __adf_iov_putmsg() to handle retries due to collisions
internally, removing the need for an external retry loop.
The functions __adf_iov_putmsg() and adf_iov_putmsg() have been merged
together maintaining the adf_iov_putmsg() name.

This will allow to use this function only for GEN2 devices, since
collision are peculiar of this generation and therefore should be
confined to the actual implementation of the transport/medium access.

Note that now adf_iov_putmsg() will retry to send a message only in case
of collisions and will now fail if an ACK is not received from the
remote function.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Refactor the receive and handle logic to separate the parsing and
handling of the PFVF message from the initial retrieval and ACK.

This is to allow the intoduction of the recv function in a subsequent
patch.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If a PFVF message with MSGORIGIN_SYSTEM not set is received, re-enable
interrupts allowing the processing of new messages.
This is to simplify the refactoring of the recv function in a subsequent
patch.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>