The board is unmaintained and unused, according to Joel, so simply let's
remove it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/CACPK8XfxXi8kQr+vxta8rD6SBgxLf_oBjAH0UkPBacQta552YQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20220623072428.33697-1-krzysztof.kozlowski@linaro.org

'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt64-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt64 for 5.20 (part 1)

Add support for Marvell 98DX2530 (and variants)

* tag 'mvebu-dt64-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: marvell: enable the 98DX2530 pinctrl driver
  arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
  dt-bindings: marvell: Document the AC5/AC5X compatibles

Link: https://lore.kernel.org/r/87cze1qlg3.fsf@BL-laptop


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This commit makes sure the drivers for the 98DX2530 pin controller is
enabled.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

The 98DX2530 SoC is the Control and Management CPU integrated into
the Marvell 98DX25xx and 98DX35xx series of switch chip (internally
referred to as AlleyCat5 and AlleyCat5X).

These files have been taken from the Marvell SDK and lightly cleaned
up with the License and copyright retained.

gregory.clement: use specific cpu type: cortex-a55 instead of armv8 in
cpu nodes, armv8 being reserved for the arm virtual models that are
not meant to implement a particular CPU type.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Merge tag 'mvebu-dt-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt for 5.20 (part 1)

Enable LED to link/activity on turris-omnia (Armada 385 based)

* tag 'mvebu-dt-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: dts: turris-omnia: enable LED controller node
  ARM: dts: turris-omnia: configure LED[0] pin function to link/activity

Link: https://lore.kernel.org/r/87lespqn28.fsf@BL-laptop


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Describe the compatible properties for the Marvell Alleycat5/5X switches
with integrated CPUs.

Alleycat5:
* 98DX2538: 24x1G + 2x10G + 2x10G Stack
* 98DX2535: 24x1G + 4x1G Stack
* 98DX2532: 8x1G + 2x10G + 2x1G Stack
* 98DX2531: 8x1G + 4x1G Stack
* 98DX2528: 24x1G + 2x10G + 2x10G Stack
* 98DX2525: 24x1G + 4x1G Stack
* 98DX2522: 8x1G + 2x10G + 2x1G Stack
* 98DX2521: 8x1G + 4x1G Stack
* 98DX2518: 24x1G + 2x10G + 2x10G Stack
* 98DX2515: 24x1G + 4x1G Stack
* 98DX2512: 8x1G + 2x10G + 2x1G Stack
* 98DX2511: 8x1G + 4x1G Stack

Alleycat5X:
* 98DX3500: 24x1G + 6x25G
* 98DX3501: 16x1G + 6x10G
* 98DX3510: 48x1G + 6x25G
* 98DX3520: 24x2.5G + 6x25G
* 98DX3530: 48x2.5G + 6x25G
* 98DX3540: 12x5G/6x10G + 6x25G
* 98DX3550: 24x5G/12x10G + 6x25G

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

The LED controller node is disabled because the leds-turris-omnia driver
does not support setting the LED blinking to be controlled by the MCU.

The patches for that have now been sent [1], so let's enable the node.

[1] https://lore.kernel.org/linux-leds/20220704105955.15474-1-kabel@kernel.org/T/



Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

The marvell PHY driver changes the LED[0] pin function to "On - 1000
Mbps Link, Off - Else".

Turris Omnia expects that the function is "On - Link, Blink - Activity,
Off - No link".

Use the `marvell,reg-init` DT property to change the function.

In the future, once netdev trigger will support HW offloading, we will
be able to have this configured via the combination of PHY driver and
leds-turris-omnia driver.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Merge tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.20, second part, please pull the following:

- Rafal adds basic support for the BCM4912-based router Asus GT-AX6000,
  he also has ARCH_BCM4908 select ARCH_BCMBCA such that in the next cycle
  we can remove ARCH_BCM4908 and continue to have make oldconfig work.
  Finally he spells out what BCA means to make it clearer

* tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux:
  arm64: bcmbca: Include full family name in Kconfig
  arm64: make ARCH_BCM4908 select ARCH_BCMBCA
  arm64: dts: Add base DTS file for bcmbca device Asus GT-AX6000

Link: https://lore.kernel.org/r/20220715221642.297536-3-f.fainelli@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains Broadcom ARM SoCs Device Tree changes for
5.20, second part:

- Rafal defines the binding of BCM4912 based router Asus GT-AX6000

* tag 'arm-soc/for-5.20/devicetree-part2' of https://github.com/Broadcom/stblinux:
  dt-bindings: arm: Add Asus GT-AX6000 based on BCM4912

Link: https://lore.kernel.org/r/20220715221642.297536-2-f.fainelli@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

It's a home router, the first BCM4912 SoC based public device.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220713200351.28526-1-zajec5@gmail.com


Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Spell out the BCA acronym to explain where these chips are coming from.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20220713145340.10599-1-zajec5@gmail.com


Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

BCA is a big set / family of devices sharing multiple hardware blocks.
It covers BCM4908, BCM63xx, BCM68xx devices and more.

Most of drivers that depend on ARCH_BCM4908 should actually depend on
ARCH_BCMBCA. To make such transition easier, cleaner and breakage-free
add a proper "select".

Later on - if we decide to keep ARCH_BCM4908 - it may be moved under
ARCH_BCMBCA menu. Keeping it may be helpful for limited compiling of DTS
files and "default" Kconfig entires. Or we may just decide to drop it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Kursad Oney <kursad.oney@broadcom.com>
Link: https://lore.kernel.org/r/20220714045858.7786-1-zajec5@gmail.com


Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

It's a home router with 1 GiB of RAM, 6 Ethernet ports, 2 USB ports.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220713200351.28526-2-zajec5@gmail.com


Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This pull request contains Broadcom ARM64-based SocS Device Tree
updates for 5.20, please pull the following:

- William adds the ARCH_BCMBCA Kconfig entry to follow the ARM 32-bit
  counter part and adds basic support for these DSL/PON SoCs: 63158,
  4912, 63146, 6856, 6813

- Anand adds basic support for the 6858 SoC

- Krzysztof fixes a missing space between a property name and its value
  in a number of DTS files

* tag 'arm-soc/for-5.20/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: Add DTS files for bcmbca SoC BCM6813
  arm64: dts: Add DTS files for bcmbca SoC BCM6856
  arm64: dts: Add DTS files for bcmbca SoC BCM63146
  arm64: dts: broadcom: adjust whitespace around '='
  ARM64: dts: Add DTS files for bcmbca SoC BCM6858
  arm64: dts: Add DTS files for bcmbca SoC BCM4912
  arm64: dts: Add DTS files for bcmbca SoC BCM63158
  arm64: bcmbca: add arch bcmbca machine entry

Link: https://lore.kernel.org/r/20220711164451.3542127-5-f.fainelli@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.20, please pull the following:

- Stefan drops the unnecessary "#address-cells" and "#size-cells"
  properties from the DPI node of BCM283x

- Anand documents and adds support for the 63178 and 6858 SoCs

- William migrates the 63138 platform over to ARCH_BCMBCA and ensures
  that it is documented within the BCMBCA Device Tree binding documents.
  He updates the 47622 DTS to remove unnecessary PSCI properties, fix
  the GIC nodes and some minor cosmetic changes. He finally adds support
  for the 63158, 4912, 6846, 6855, 6756, 63146, 6856, 63148, 6813, 6318
  SoCs.

- Peter, Nicolas and Stefan adds the necessary Device Tree nodes to the
  BCM2711 (Raspberry Pi 4) DTS to enable the use of the V3D GPU on these
  platforms.

- Christian adds support for the BCM53015 based Cisco Meraki MR26
  Wi-Fi access point.

- Krzysztof updates the Broadcom platforms DTS to add a missing
  whitespace between the property name and its value.

* tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux: (35 commits)
  ARM: dts: Add BCM63138 generic board dts
  ARM: dts: update dts files for bcmbca SoC BCM63138
  ARM: dts: Move BCM963138DVT board dts to ARCH_BCMBCA
  dt-bindings: arm: add BCM63138 SoC
  ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
  ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
  dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
  dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
  dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
  ARM: dts: BCM5301X: Add DT for Meraki MR26
  dt-bindings: ARM: add bindings for the Meraki MR26
  dt-bindings: arm64: Add BCM6813 SoC
  ARM: dts: Add DTS files for bcmbca SoC BCM63148
  dt-bindings: arm: Add BCM63148 SoC
  dt-bindings: arm64: Add BCM6856 SoC
  dt-bindings: arm64: Add BCM63146 SoC
  ARM: dts: broadcom: correct gpio-keys properties
  ARM: dts: broadcom: align gpio-key node names with dtschema
  ARM: dts: Add DTS files for bcmbca SoC BCM6756
  dt-bindings: arm: Add BCM6756 SoC
  ...

Link: https://lore.kernel.org/r/20220711164451.3542127-4-f.fainelli@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DTS updates for v5.20

This introduces initial support for Lenovo ThinkPad X13s, Qualcomm 8cx
Gen 3 Compute Reference Device, SA8295P Automotive Development Platform,
Xiaomi Mi 5s Plus, five new SC7180 Chrome OS boards, Inforce IFC6560, LG
G7 ThinQ and LG V35 ThinQ.

With IPQ8074 gaining GDSC support, this was expressed in the gcc node
and defined for the USB nodes. The SDHCI reset line was defined to get
the storage devices into a known state.

For MSM8996 interconnect providers, the second DSI interface, resets for
SDHCI are introduced. Support for the Xiaomi Mi 5s Plus is introduced
and the Dragonboard 820c gains definitions for its LEDs.

The MSM8998 platform changes consists of a various cleanup patches, the
FxTec Pro1 is split out from using the MTP dts and Sony Xperia devices
on the "Yoshino" platform gains ToF sensor.

On SC7180 five new Trogdor based boards are added and the description of
keyboard and detachables is improved.

On the SC7280-based Herobrine board DisplayPort is enabled, SPI flash
clock rate is changed, WiFi is enabled and the modem firmware path is
updated. The Villager boards gains touchscreen, and keyboard backlight.

This introduces initial support for the SC8280XP (aka 8cx Gen 3) and
related automotive platforms are introduced, with support for the
Qualcomm reference board, the Lenovo Thinkpad X13s and the SA8295P
Automotive Development Platform.

In addition to a wide range of smaller fixes on the SDM630 and SDM660
platforms, support for the secondary high speed USB controller is
introduced and the Sony Xperia "Nile" platform gains support for the RGB
status LED. Support for the Inforce IFC6560 board is introduced.

On SDM845 the bandwidth monitor for the CPU subsystem is introduced, to
scale LLCC clock rate based on profiling. CPU and cluster idle states
are switched to OSI hierarchical states. DB845c and SHIFT 6mq gains LED
support and new support for the LG G7 ThinQ and LG V35 ThinQ boards are
added.

DLL/DDR configuration for SDHCI nodes are defined for SM6125.

On SM8250 the GPU per-process page tables is enabled and for RB5 the
Light Pulse Generator-based LEDs are added.

The display clock controller is introduced for SM8350.

On SM8450 this introduces the camera clock controller and the UART
typically used for Bluetooth. The interconnect path for the crypto
engine is added to the SCM node, to ensure this is adequately clocked.

The assigned-clock-rate for the display processor is dropped from
several platforms, now that the driver derrives the min and max from the
clock.

In addition to this a wide range of fixes for stylistic issues and
issues discovered through Devicetree binding validation across many
platforms and boards are introduced.

* tag 'qcom-arm64-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (193 commits)
  arm64: dts: qcom: sc8280xp: fix DP PHY node unit addresses
  arm64: dts: qcom: sc8280xp: fix usb_0 HS PHY ref clock
  arm64: dts: qcom: sc7280: fix PCIe clock reference
  docs: arm: index.rst: add google/chromebook-boot-flow
  arm64: dts: qcom: msm8996: clean up PCIe PHY node
  arm64: dts: qcom: msm8996: use non-empty ranges for PCIe PHYs
  arm64: dts: qcom: sm8450: drop UFS PHY clock-cells
  arm64: dts: qcom: sm8250: drop UFS PHY clock-cells
  arm64: dts: qcom: sc8280xp: drop UFS PHY clock-cells
  arm64: dts: qcom: sm8450: drop USB PHY clock index
  arm64: dts: qcom: sm8350: drop USB PHY clock index
  arm64: dts: qcom: msm8998: drop USB PHY clock index
  arm64: dts: qcom: ipq8074: drop USB PHY clock index
  arm64: dts: qcom: ipq6018: drop USB PHY clock index
  arm64: dts: qcom: sm8250: add missing PCIe PHY clock-cells
  arm64: dts: qcom: sc7280: drop PCIe PHY clock index
  Revert "arm64: dts: qcom: Fix 'reg-names' for sdhci nodes"
  arm64: dts: qcom: sc7180-idp: add vdds supply to the DSI PHY
  arm64: dts: qcom: sc7280: use constants for gpucc clocks and power-domains
  arm64: dts: qcom: msm8996: add missing DSI clock assignments
  ...

Link: https://lore.kernel.org/r/20220713203939.1431054-1-bjorn.andersson@linaro.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm DTS updates for v5.20

This adds USB, NAND, QPIC BAM, CPUfreq, remoteprocs, SMEM, SCM,
watchdog, interconnect providers to the SDX65 5G modem platform and
enables relevant devices for the MTP.

The BAM DMUX interface used to exchange Ethernet/IP data with the modem
is described on the MSM8974 platform.

It fixes up the PXO supply clock to L2CC on IPQ6084, as the platform is
transitioned away from global clock lookup.

SDX55 has it's debug UART interrupt level corrected.

Lastly it contains a wide variety of fixes for DeviceTree validation
issues across most of the platforms.

* tag 'qcom-dts-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
  ARM: dts: qcom: msm8974: rename GPU's OPP table node
  ARM: dts: qcom: apq8064: disable DSI and DSI PHY by default
  ARM: dts: qcom: apq8064: rename DSI PHY iface clock
  ARM: dts: qcom: extend scm compatible to match dt-schema
  ARM: dts: qcom: Fix sdhci node names - use 'mmc@'
  ARM: dts: qcom: apq8064: drop phy-names from HDMI device node
  ARM: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply
  ARM: dts: qcom: pm8841: add required thermal-sensor-cells
  ARM: dts: qcom: msm8974: add required ranges to OCMEM
  ARM: dts: qcom: sdx55: add dedicated IMEM and syscon compatibles
  ARM: dts: qcom: msm8974: add dedicated IMEM compatible
  ARM: dts: qcom: apq8064-asus-nexus7: add dedicated IMEM compatible
  ARM: dts: qcom: use generic sram as name for imem and ocmem nodes
  ARM: dts: qcom: ipq8064: add function to LED nodes
  ARM: dts: qcom: ipq8064-rb3011: add color to LED node
  ARM: dts: qcom: ipq4018-ap120c-ac: add function and color to LED nodes
  ARM: dts: qcom: apq8060-ifc6410: add color to LED node
  ARM: dts: qcom: apq8060-dragonboard: add function and color to LED nodes
  ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UART
  ARM: dts: qcom-msm8974: fix irq type on blsp2_uart1
  ...

Link: https://lore.kernel.org/r/20220713032024.1372427-1-bjorn.andersson@linaro.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 DT for v5.20 #2

It contains only the enablement of USB device port.

* tag 'at91-dt-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: kswitch-d10: enable the USB device port

Link: https://lore.kernel.org/r/20220713070602.1652118-1-claudiu.beznea@microchip.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Now that there is driver support for the USB device, enable it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220707132500.1708020-2-michael@walle.cc

Merge tag 'sunxi-dt-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

- added H616 EMAC compatible
- make pinctrl interrupts optionals in DT binding
- initial H616 DTSI
- added OrangePi Zero 2 board
- added X96 Mate TV box
- add VCC PI supply in pinctrl DT binding

* tag 'sunxi-dt-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h616: Add X96 Mate TV box support
  arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support
  dt-bindings: arm: sunxi: Add two H616 board compatible strings
  dt-bindings: pinctrl: sunxi: allow vcc-pi-supply
  arm64: dts: allwinner: Add Allwinner H616 .dtsi file
  dt-bindings: pinctrl: sunxi: Make interrupts optional
  dt-bindings: arm: sunxi: Add H616 EMAC0 compatible

Link: https://lore.kernel.org/r/YsnF9cm/qniIOklj@kista.localdomain


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.20:

- Add device tree support for i.MX93 SoC.
- New board device tree: TQMa8MPQL, DH electronics i.MX8M Plus DHCOM and
  PDK2, i.MX93 11x11 EVK, phyBOARD-Polis-i.MX8MM.
- A series from Abel Vesa and Viorel Suman to fix i.MX8QXP device tree
  to comply with DT schema.
- Disable job ring 0 device for i.MX8MM to avoid caam_jr probe error, due
  to that JR0 reservation is done in both upstream (v2.7) and downstream
  (NXP lf_v2.4) TF-A.
- A series from Krzysztof Kozlowski to align gpio-key and LED node names
  with dtschema.
- Add SNVS LPGPR device for i.MX8MM so that some preserving registers
  becomes available as NVMEM.
- Add NoC device support for i.MX8MP SoC.
- A couple of changes from Sean Anderson to add SFP node for TA devices
  for LayerScape SoCs.
- A series from Shengjiu Wang to enable bt-sco sound card support for
  NXP i.MX8M EVK boards.
- Other small and random board updates.

* tag 'imx-dt64-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (33 commits)
  arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP
  arm64: dts: freescale: imx8qxp: Fix the keys node name
  arm64: dts: freescale: imx8: Fix the system-controller node name
  arm64: dts: freescale: imx8qxp: Fix the ocotp node name
  arm64: dts: freescale: imx8qxp: Add fallback compatible for clock controller
  arm64: dts: freescale: imx8: Fix power controller name
  arm64: dts: freescale: imx8qxp: Remove unnecessary clock related entries
  arm64: dts: imx8mp: add NoC node
  arm64: dts: Add SFP node for TA 3.0 devices
  arm64: dts: layerscape: Add SFP node for TA 2.1 devices
  arm64: dts: freescale: Add phyBOARD-Polis-i.MX8MM support
  arm64: dts: imx8m{m,p}-verdin: use IT temperatures
  arm64: dts: imx8mn-evk: add bt-sco sound card support
  arm64: dts: imx8mq-evk: add bt-sco sound card support
  arm64: dts: imx8mm-evk: add bt-sco sound card support
  arm64: freescale/imx8mp-evk.dts: reorder nodes alphabetically
  arm64: dts: imx8mq: Pass a label to the AIPS nodes
  arm64: dts: imx8m: Pass a label to the soc node
  arm64: dts: imx8mm-venice-gw7902: fix UART1 CTS
  arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2
  ...

Link: https://lore.kernel.org/r/20220709082951.15123-5-shawnguo@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX device tree change for 5.20:

- A series from Alexander Stein to fix some i.MX6UL dt_binding_check
  warnings.
- Replace deprecated 'enable-sdio-wakeup' property with 'wakeup-source'
  for a couple of boards.
- A set of imx7-colibri device tree updates from Marcel Ziswiler to
  improve devices Display, Touch, Ethernet and SD/MMC, and also adds
  Toradex Iris carrier board.
- A few improvements on imx6qdl-colibri board, correct SGTL5000 MCLK
  handling, simplify handling of inverted PWM backlight.
- A series from Max Krummenacher (and Oleksandr Suvorov) to improve the
  existing i.MX6 Apalis carrier board device trees and adds a new device
  tree for the Ixora V1.2 carrier board.
- Add USB dual-role switching using extcon for imx7-colibri board.
- Add SFP node for TA 2.1 devices for LayerScape SoCs.
- Other small and random updates on various boards.

* tag 'imx-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (61 commits)
  ARM: dts: layerscape: Add SFP node for TA 2.1 devices
  ARM: dts: imx6qdl-prti6q.dtsi: Add applicable properties to usdhc3
  ARM: dts: imx6q-bosch-acc: Replace 'enable-sdio-wakeup'
  ARM: dts: imx7d-smegw01: Replace 'enable-sdio-wakeup'
  ARM: dts: imx6q-apalis: Cleanup
  ARM: dts: imx6q-apalis: backlight pwm: Adapt brightness steps
  ARM: dts: imx6q-apalis: backlight pwm: Simplify inverted backlight
  ARM: dts: imx6q-apalis: Add support for Toradex Ixora V1.2 carrier boards
  ARM: dts: imx6q-apalis: Clean-up sd card support
  ARM: dts: imx6q-apalis: Add adv7280 video input
  ARM: dts: imx6q-apalis: Add ov5640 mipi csi camera
  ARM: dts: imx6q-apalis: Disable stmpe touchscreen
  ARM: dts: imx6q-apalis: Disable HDMI
  ARM: dts: imx6q-apalis: Add LVDS panel support
  ARM: dts: imx6q-apalis: move gpio-keys to SoM dtsi
  ARM: dts: imx6q-apalis: Move Atmel MXT touch ctrl to SoM dtsi
  ARM: dts: imx6q-apalis: Move pinmux groups to SoM dtsi
  ARM: dts: imx6q-apalis: Move parallel rgb interface to SoM dtsi
  ARM: dts: imx6q-apalis: Command pmic to standby for poweroff
  ARM: dts: imx6q-apalis: Add gpio-line-names
  ...

Link: https://lore.kernel.org/r/20220709082951.15123-4-shawnguo@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings update for 5.20:

- Compatibles for new boards: i.MX7 based Toradex Colibri, DH electronics
  i.MX8M Plus DHCOM and PDK2, TQMa8MPxL, Carrier for Toradex i.MX6 Apalis,
  i.MX93 EVK, PHYTEC i.MX8MM based board.
- A series from Abel Vesa (and Viorel Suman) to split fsl,scu.txt bindings
  into multiple subsystem bindings in yaml format.
- Fix 'line too long' warning caused by Toradex Colibri boards.

* tag 'imx-bindings-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: add TQMa8MPxL board
  dt-bindings: firmware: Add fsl,scu yaml file
  dt-bindings: watchdog: Add fsl,scu-wdt yaml file
  dt-bindings: thermal: Add fsl,scu-thermal yaml file
  dt-bindings: rtc: Add fsl,scu-rtc yaml file
  dt-bindings: power: Add fsl,scu-pd yaml file
  dt-bindings: nvmem: Add fsl,scu-ocotp yaml file
  dt-bindings: input: Add fsl,scu-key yaml file
  dt-bindings: pinctrl: imx: Add fsl,scu-iomux yaml file
  dt-bindings: clk: imx: Add fsl,scu-clk yaml file
  bindings: arm: fsl: Add PHYTEC i.MX8MM devicetree bindings
  dt-bindings: arm: fsl: Add carrier for toradex,apalis-imx6q
  dt-bindings: arm: fsl: Decrease the line length
  dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM and PDK2
  dt-bindings: arm: fsl: add toradex,colibri-imx7s/d/d-emmc-iris/-v2
  dt-bindings: arm: fsl: add imx93 11x11 evk board
  dt-bindings: arm: fsl: correct 1g vs. 1gb in toradex,colibri-imx6ull-*

Link: https://lore.kernel.org/r/20220709082951.15123-3-shawnguo@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-keystone-dt-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt

Keystone2 device tree updates for v5.20

* Whitespace cleanups.

* tag 'ti-keystone-dt-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  ARM: dts: keystone: Adjust whitespace around '='

Link: https://lore.kernel.org/r/20220708232709.rrpzbrpv7jbipyym@eldest


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-dt-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt

TI K3 device tree updates for v5.20

* AM62: fixups, sa2ul enabled, ramoops for sk
* others: whitespace and gpio-key cleanup.

* tag 'ti-k3-dt-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  arm64: dts: ti: k3-am62-main: Enable crypto accelerator
  arm64: dts: ti: k3-am625-sk: Enable ramoops
  arm64: dts: ti: k3-am642-sk: Add pinmux corresponding to main_uart0
  arm64: dts: ti: Align gpio-key node names with dtschema
  arm64: dts: ti: Adjust whitespace around '='

Link: https://lore.kernel.org/r/20220708232701.vpk45lwogpasaaay@enchilada


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.20-rc1

This adds and enables various hardware on Tegra234 (host1x, VIC, GPCDMA)
as well as the Control BackBone related device tree nodes on Tegra194
and Tegra234.

Native timers are enabled on Tegra186, Tegra194 and Tegra234, which
allow keeping track of SoC-wide timestamps as well as hardware watchdog
functionality.

The audio subsystem is enhanced with the Output Processing Engine (OPE)
on Tegra210 and later.

Finally there are a handful of minor cleanups and fixes.

* tag 'tegra-for-5.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Fix SDMMC1 CD on P2888
  arm64: tegra: Update compatible for Tegra234 GPCDMA
  arm64: tegra: Add Host1x and VIC on Tegra234
  arm64: tegra: Add Host1x context stream IDs on Tegra186+
  arm64: tegra: Enable native timers on Tegra234
  arm64: tegra: Enable native timers on Tegra194
  arm64: tegra: Enable native timers on Tegra186
  arm64: tegra: Add node for CBB 2.0 on Tegra234
  arm64: tegra: Add node for CBB 1.0 on Tegra194
  arm64: tegra: Align gpio-keys node names with dtschema
  arm64: tegra: Mark BPMP channels as no-memory-wc
  arm64: tegra: Add Tegra234 GPCDMA device tree node
  arm64: tegra: Adjust whitespace around '='
  arm64: tegra: Enable OPE on various platforms
  arm64: tegra: Add OPE device on Tegra210 and later

Link: https://lore.kernel.org/r/20220708185608.676474-7-thierry.reding@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v5.20-rc1

Two minor fixes to help reduce the noise from the DT validation tooling.

* tag 'tegra-for-5.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Align gpio-keys node names with dtschema
  ARM: tegra: Adjust whitespace around '='

Link: https://lore.kernel.org/r/20220708185608.676474-6-thierry.reding@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v5.20-rc1

These changes add clock, reset, memory client and power domain
definitions for various devices found on Tegra234 along with a few
device tree bindings for new hardware.

* tag 'tegra-for-5.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: tegra-ccplex-cluster: Remove status from required properties
  dt-bindings: Add headers for Host1x and VIC on Tegra234
  dt-bindings: timer: Add Tegra186 & Tegra234 Timer
  dt-bindings: arm: tegra: Add NVIDIA Tegra234 CBB 2.0 binding
  dt-bindings: arm: tegra: Add NVIDIA Tegra194 AXI2APB binding
  dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB 1.0 binding
  dt-bindings: memory: Add Tegra234 MGBE memory clients
  dt-bindings: Add Tegra234 MGBE clocks and resets
  dt-bindings: power: Add Tegra234 MGBE power domains
  dt-bindings: Add headers for Tegra234 GPCDMA

Link: https://lore.kernel.org/r/20220708185608.676474-4-thierry.reding@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

- whitespace fixes
- replaced RTC indexes with constants
- gpio-key nodes aligned with dtschema
- fixed LED node for Orange Pi Win
- added OPP table for R40 CPU and thermal points
- updated I2C controller compatibles
- added compatibles for MBUS, D1 DE2 clocks, D1 USB
- enable internal HMIC bias on Pinephone

* tag 'sunxi-dt-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: pinephone: Enable internal HMIC bias
  dt-bindings: arm: sunxi: Add several MBUS compatibles
  dt-bindings: arm: sunxi: Default to the full MBUS binding
  dt-bindings: usb: generic-ohci: Add Allwinner D1 compatible
  dt-bindings: usb: generic-ehci: Add Allwinner D1 compatible
  dt-bindings: usb: sunxi-musb: Add Allwinner D1 compatible
  arm64: dts: allwinner: a100: Update I2C controller fallback
  dt-bindings: i2c: mv64xxx: Add variants with offload support
  ARM: dts: sun8i-r40: Add thermal trip points/cooling maps
  ARM: dts: sun8i-r40: add opp table for cpu
  ARM: dts: sun8i-r40: Add "cpu-supply" node for sun8i-r40 based board
  arm64: dts: allwinner: a64: orangepi-win: Fix LED node name
  dt-bindings: clock: Add compatible for D1 DE2 clocks
  ARM: dts: allwinner: align gpio-key node names with dtschema
  arm64: dts: allwinner: align gpio-key node names with dtschema
  arm64: dts: allwinner: Use constants for RTC clock indexes
  ARM: dts: sunxi: Use constants for RTC clock indexes
  ARM: dts: sun5i: adjust whitespace around '='

Link: https://lore.kernel.org/r/Ysh8qRH0Q5Xv9Qhf@kista.localdomain


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.19-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

Some fixes to follow DT spec.

MT6795:
- Big update of supported devices: cpu-map, L2 cache, PMU, watchdog,
  MediaTek timer, Arm CCI, pincontroller

MT7622:
- Change WPS button to active low

MT8173:
- Add infracfg property to the IOMMU node (also for mt2712e)
- Add optional AXI clock to NOR Flash node

MT8183:
- add Medaitek CCI support
- add support for Smart Voltag Scaling (SVS)
- add GCE support to mutex
- Add panel default rotation to some chromebooks
- Add power supply to power domain so that SRAM for the GPU has power

MT8186:
- compatible added, DTS not yet ready.

MT8192:
- Add support for Acer Chromebook 514

MT8195:
- Add efuse node
- Enable USB wakeup support
- Add support for Acer Chromebook Spin 513

* tag 'v5.19-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (66 commits)
  arm64: dts: mt8183: Add panel rotation
  arm64: dts: mt7622: fix BPI-R64 WPS button
  arm64: dts: mt8173: Fix nor_flash node
  arm64: dts: mediatek: cherry: Add I2C-HID touchscreen on I2C4
  arm64: dts: mediatek: cherry: Enable support for the SPI NOR flash
  arm64: dts: mediatek: cherry: Enable MT6360 sub-pmic on I2C7
  arm64: dts: mediatek: cherry: Enable T-PHYs and USB XHCI controllers
  arm64: dts: mediatek: cherry: Enable I2C and SPI controllers
  arm64: dts: mediatek: cherry: Document gpios and add default pin config
  arm64: dts: mediatek: cherry: Add support for internal eMMC storage
  arm64: dts: mediatek: cherry: Assign interrupt line to MT6359 PMIC
  arm64: dts: mediatek: cherry: Add platform regulators layout and config
  arm64: dts: mediatek: Introduce MT8195 Cherry platform's Tomato
  dt-bindings: arm: mediatek: Add MT8195 Cherry Tomato Chromebooks
  arm64: dts: mediatek: asurada: Add SPI NOR flash memory
  arm64: dts: mediatek: asurada: Enable SCP
  arm64: dts: mediatek: asurada: Enable MMC
  arm64: dts: mediatek: asurada: Add SPMI regulators
  arm64: dts: mediatek: asurada: Add MT6359 PMIC
  arm64: dts: mediatek: asurada: Enable PCIe and add WiFi
  ...

Link: https://lore.kernel.org/r/b0d5b584-2693-73b3-79f6-3e2292f006ea@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.19-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

Airoha EN7523:
- Add clock and PCIe support

Several style fixes to comply with DT spec.

* tag 'v5.19-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  ARM: dts: mediatek: align gpio-key node names with dtschema
  ARM: dts: mediatek: adjust whitespace around '='
  ARM: dts: Add PCIe support for Airoha EN7523
  ARM: dts: add clock support for Airoha EN7523

Link: https://lore.kernel.org/r/63536da6-fbe4-2d96-ab91-ae756cd580c4@gmail.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The X96 Mate is an Allwinner H616 based TV box, featuring:
  - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
  - 2GiB/4GiB RAM (fully usable!)
  - 16/32/64GiB eMMC
  - 100Mbps Ethernet (via embedded AC200 EPHY, not yet supported)
  - Unsupported Allwinner WiFi chip
  - 2 x USB 2.0 host ports
  - HDMI port
  - IR receiver
  - 5V/2A DC power supply via barrel plug

Add a basic devicetree for it, with SD card and eMMC working, as
well as serial and the essential peripherals, like the AXP PMIC.

This DT is somewhat minimal, and should work on many other similar TV
boxes with the Allwinner H616 chip.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708105235.3983266-8-andre.przywara@arm.com

The OrangePi Zero 2 is a development board with the new H616 SoC. It
comes with the following features:
  - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
  - 512MiB/1GiB DDR3 DRAM
  - AXP305 PMIC
  - Raspberry-Pi-1 compatible GPIO header
  - extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports
  - 1 USB 2.0 host port
  - 1 USB 2.0 type C port (power supply + OTG)
  - MicroSD slot
  - on-board 2MiB bootable SPI NOR flash
  - 1Gbps Ethernet port (via RTL8211F PHY)
  - micro-HDMI port
  - (yet) unsupported Allwinner WiFi/BT chip

Add the devicetree file describing the currently supported features.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708105235.3983266-7-andre.przywara@arm.com

This adds the two board compatible strings of two boards with the
Allwinner H616 SoC. One is a development board from OrangePi, the other
some TV box from some formerly unused vendor. Add that vendor to the
vendor list on the way.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708105235.3983266-6-andre.przywara@arm.com

The Allwinner H616 SoC contains a VCC_PI pin, which supplies the voltage
for GPIO port I.
Extend the range of supply port names to include vcc-pi-supply to cover
that.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708105235.3983266-5-andre.przywara@arm.com

This (relatively) new SoC is similar to the H6, but drops the (broken)
PCIe support and the USB 3.0 controller. It also gets the management
controller removed, which in turn removes *some*, but not all of the
devices formerly dedicated to the ARISC (CPUS).
And while there is still the extra sunxi interrupt controller, the
package lacks the corresponding NMI pin, so no interrupts for the PMIC.

The reserved memory node is actually handled by Trusted Firmware now,
but U-Boot fails to propagate this to a separately loaded DTB, so we
keep it in here for now, until U-Boot learns to do this properly.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708105235.3983266-4-andre.przywara@arm.com

The R_PIO pinctrl device on the Allwinner H616 SoC does not have an
interrupt (it features only two pins).
However the binding requires at least naming one upstream interrupt,
plus the #interrupt-cells and interrupt-controller properties.

Drop the unconditional requirement for the interrupt properties, and
make them dependent on being not this particular pinctrl device.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708105235.3983266-3-andre.przywara@arm.com

The Allwinner H616 contains an "EMAC0" Ethernet MAC compatible to the A64
version.

Add it to the list of compatible strings.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708105235.3983266-2-andre.przywara@arm.com

This adds support for TQMa8MPQL module on MBa8MPxL board.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>