- Apr 05, 2023
-
-
Philipp Hortmann authored
customer_id is initialize to zero. Changing customer_id to RT_CID_DEFAULT will not change customer_id as it is already zero. default and EEPROM_CID_WHQL contain only a break. Remove useless code lines to increase readability. Signed-off-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/58df9db5da84991206266e739b2a12c893d1be8e.1680427945.git.philipp.g.hortmann@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Philipp Hortmann authored
customer_id is initialize to zero. Changing customer_id to RT_CID_819x_CAMEO, RT_CID_819x_RUNTOP, RT_CID_Nettronix or RT_CID_PRONET would not change the program execution as there is no equation for RT_CID_819x_CAMEO, RT_CID_819x_RUNTOP, RT_CID_Nettronix or RT_CID_PRONET. Remove useless code lines to increase readability. Signed-off-by:
-
Philipp Hortmann authored
customer_id is initialize to zero. Changing customer_id to RT_CID_DLINK would not change the program execution as there is no equation for RT_CID_DLINK. Remove useless code lines to increase readability. Signed-off-by:
-
Philipp Hortmann authored
powerlevelOFDM24G is set to priv->pwr_track. Then Value is set to powerlevelOFDM24G and then only once used. Remove both variables to increase readability. Signed-off-by:
-
Philipp Hortmann authored
enum RF_1T2R is used to initialize a local variable RF_Type that is then shifted. The result of the shift is zero. Remove code that has always the same result to increase readability. Signed-off-by:
-
Philipp Hortmann authored
Remove RF_Type from _rtl92e_dm_tx_update_tssi_weak_signal and _rtl92e_dm_tx_update_tssi_strong_signal as it is unused. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Daniel Watson authored
Use tabs to indent code and spaces to align in order to make the code consistent and easier to read. Signed-off-by:
Daniel Watson <ozzloy@gmail.com> Link: https://lore.kernel.org/r/ZCdmCBIdabBGqm11@trent-reznor Signed-off-by:
-
Lukas Bulwahn authored
The file staging/vme_user/Kconfig is only included by the top-level staging/Kconfig if STAGING is enabled. So, there is no need to mention the dependency on STAGING within the vme_user Kconfig file. Further, the config VME_USER is already within the "if VME_BUS" block, so there is no need to mention the dependency on VME_BUS. Clean up these duplications of dependencies. No semantic change. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20230329074342.27595-1-lukas.bulwahn@gmail.com Signed-off-by:
-
- Apr 04, 2023
-
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230403154014.2564054-25-u.kleine-koenig@pengutronix.de Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
- Mar 29, 2023
-
-
Daniel Watson authored
Move the open brace of if-statements to the same line. This matches the brace placement style described in the kernel's style guide. Signed-off-by:
-
- Mar 28, 2023
-
-
Khadija Kamran authored
Balance if/else braces as recommended by checkpatch.pl Signed-off-by:
Khadija Kamran <kamrankhadijadj@gmail.com> Link: https://lore.kernel.org/r/ZCISGaFELBfDyGRT@khadija-virtual-machine Signed-off-by:
-
Khadija Kamran authored
Linux kernel coding style uses '*/' on a separate line at the end of multi line comments. Fix block comments by moving '*/' at the end of block comments on a separate line as reported by checkpatch.pl script. Signed-off-by:
-
Khadija Kamran authored
Linux kernel coding style for block comments uses a column of '*' on the left side. Fix block comment by adding '*' on subsequent lines as reported by checkatch.pl script. Signed-off-by:
-
Khadija Kamran authored
Remove all of the commented out code lines as they are not being used and can be brought back in the future if they are ever needed again. Signed-off-by:
-
Khadija Kamran authored
Remove the change history information as it is not required in the comments. Signed-off-by:
-
Philipp Hortmann authored
Remove WIRELESS_MODE_N_5G from equations as it is not supported by hardware and to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Remove WIRELESS_MODE_N_5G and WIRELESS_MODE_A as those are not supported by hardware and to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Remove WIRELESS_MODE_N_5G and WIRELESS_MODE_A as those are not supported by hardware and to improve readability. Combine WIRELESS_MODE_G with default to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Equation (support_mode & WIRELESS_MODE_N_24G) will always be true. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
Remove wireless_mode == WIRELESS_MODE_N_5G as 5G is not supported by hardware and to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Remove _rtl92e_get_supported_wireless_mode to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Remove rtl92e_config_phy to improve readability. Signed-off-by:
-
Sumitra Sharma authored
Remove the extra blank line in accordance with the Linux kernel coding-style regulations. These issues were reported by checkpatch.pl "CHECK: Please don't use multiple blank lines" Signed-off-by:
Sumitra Sharma <sumitraartsy@gmail.com> Link: https://lore.kernel.org/r/20230327171653.GA188371@sumitra.com Signed-off-by:
-
Sumitra Sharma authored
Splitting function header to multiple lines because of 80 characters per line limit, results in ending the function call line with '('. This leads to CHECK reported by checkpatch.pl Move the first parameter right after the '(' in the function call line. Align the rest of the parameters to the opening parenthesis. Signed-off-by: -
Nuno Sá authored
As stated in the device datasheet [1], bits a0 and a1 have to be set to 1 for the configuration mode. [1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf Fixes: b19e9ad5 ("staging:iio:resolver:ad2s1210 general driver cleanup") Cc: stable <stable@kernel.org> Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230327145414.1505537-1-nuno.sa@analog.com Signed-off-by:
-
- Mar 26, 2023
-
-
Sumitra Sharma authored
Convert 'pwm_chip_to_gb_pwm_chip' from a macro to a static inline function, to make the relevant types apparent in the definition and to benefit from the type checking performed by the compiler at call sites. Signed-off-by:
-
Michael Straube authored
The field rf_type of struct r8192_priv is always RF_1T2R and only used in one place. Use RF_1T2R directly there and remove rf_type from struct r8192_priv. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Tested-by:
-
Michael Straube authored
The value of priv->rf_type is always RF_1T2R. Remove if statements that check for priv->rf_type == RF_1T2R and remove resulting dead code. Signed-off-by:
-
