- Oct 16, 2018
-
-
Eric Anholt authored
Once we push the job, the scheduler could run it and free it. So, if we want to reference their fences, we need to grab them before then. I haven't seen this happen in many days of conformance test runtime, but let's still close the race. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: 57692c94 ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Link: https://patchwork.freedesktop.org/patch/254119/ Reviewed-by:
Boris Brezillon <boris.brezillon@bootlin.com>
-
- Oct 11, 2018
-
-
José Roberto de Souza authored
drm_dp_cec_register_connector() is called when registering each DP connector in DRM, while sounds a good idea register CEC adapters as earlier as possible, it causes some driver initialization delay trying to do DPCD transactions in disconnected connectors. This change will cause no regressions as drm_dp_cec_set_edid() will still be called in further detection of connected connectors with a valid edid parameter. This change reduced the module load of i915 by average 0.5sec in a machine with just one DP port disconnected while reducing more than 3sec in a machine with 4 DP ports disconnected. Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181011004439.4482-1-jose.souza@intel.com
-
YueHaibing authored
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- Oct 08, 2018
-
-
Giulio Benetti authored
If tcon->panel pointer is NULL, trying to dereference from it (i.e. tcon->panel->connector) will cause a null pointer dereference. Add tcon->panel null pointer check before calling sun4i_tcon0_mode_set_dithering(). Signed-off-by:
Giulio Benetti <giulio.benetti@micronovasrl.com> Fixes: f11adcec ("drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels") Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-2-giulio.benetti@micronovasrl.com
-
Giulio Benetti authored
Since tcon->panel is a pointer returned by of_drm_find_panel() need to check if it is not NULL, hence a valid pointer. IS_ERR() instead checks return error values, not NULL pointers. Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)". Signed-off-by:
-
- Oct 06, 2018
-
-
Daniel Vetter authored
It's for legacy drivers only (atomic ones should use drm_atomic_helper_check_plane_state() instead), and there's no users left except the one in the primary plane helpers. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-18-daniel.vetter@ffwll.ch
-
Thomas Hellstrom authored
Use the correct helper and also return early on helper success rather than on helper failure. Also explicitly return 0 in the case of no fb. v2: Check for !fb after updating state->visible (Ville). Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-17-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Well except the destroy helper, which isn't really a primary helper but generally useful, if mislabelled. v2: Keep some of the nice comments about the limitations of the primarmy plane helpers, and put them into the kerneldoc for drm_crtc_init() (Sam). Reviewed-by:
-
Daniel Vetter authored
Motivated by review comments from Ville&Sean. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Reviewed-by:
-
Daniel Vetter authored
Didn't get updated in a rework of the original patch. Fixes: 059b5eb5 ("drm: move native byte order quirk to new drm_driver_legacy_fb_format function") Cc: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Daniel Vetter authored
With armada the last bigger driver that realistically needed these to convert from legacy kms to atomic is converted. These helpers have been broken more often than not the past 2 years, and as this little patch series shows, tricked a bunch of people into using the wrong helpers for their functions. Aside: I think a lot more drivers should be using the device-level drm_atomic_helper_shutdown/suspend/resume helpers and related functions. In almost all the cases they get things exactly right. Reviewed-by:
-
Daniel Vetter authored
drm_plane_helper_disable is a non-atomic drivers only function, and will blow up (since no one passes the locking context it needs). Atomic drivers which want to quiescent their hw on unload should use drm_atomic_helper_shutdown() instead. Reviewed-by:
Shawn Guo <shawnguo@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-15-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
drm_plane_helper_disable is a non-atomic drivers only function, and will blow up (since no one passes the locking context it needs). Atomic drivers which want to quiescent their hw on unload should use drm_atomic_helper_shutdown() instead. v2: Rebase. Reviewed-by:
-
Daniel Vetter authored
drm_plane_helper_disable is a non-atomic drivers only function, and will blow up (since no one passes the locking context it needs). Atomic drivers which want to quiescent their hw on unload should use drm_atomic_helper_shutdown() instead. The sti cleanup code seems supremely confused: - In the load error path it calls drm_mode_config_cleanup before it stops various kms services like poll worker or fbdev emulation. That's going to oops. - The actual unload code doesn't even bother with the cleanup and just leaks. Try to fix this while at it. Reviewed-by:
-
Daniel Vetter authored
drm_plane_helper_disable is a non-atomic drivers only function, and will blow up (since no one passes the locking context it needs). Atomic drivers which want to quiescent their hw on unload should use drm_atomic_helper_shutdown() instead. Reviewed-by:
-
Daniel Vetter authored
drm_plane_helper_disable is a non-atomic drivers only function, and will blow up (since no one passes the locking context it needs). Atomic drivers which want to quiescent their hw on unload should use drm_atomic_helper_shutdown() instead. Reviewed-by:
-
Daniel Vetter authored
These do absolutely nothing for atomic drivers. Reviewed-by:
-
Daniel Vetter authored
These do absolutely nothing for atomic drivers. Reviewed-by:
-
Daniel Vetter authored
Motivated by vmwgfx digging around in core uapi bits it shouldn't dig around in. Reviewed-by:
-
Daniel Vetter authored
We already have a separate overview doc for this, makes sense to untangle it from the overall atomic helpers. v2: Rebase v3: Rebase more. Acked-by:
-
Daniel Vetter authored
It's the default. The exported version was kinda a transition state, before we made this the default. To stop new atomic drivers from using it (instead of just relying on the default) let's unexport it. v2: rename the default implementation to a more fitting name and add a comment (Laurent) Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-3-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
For atomic driver this is the default, no need to reimplement it. We still need to keep the copypasta for not-atomic drivers though, since no one polished the legacy crtc helpers as much as the atomic ones. v2: amdgpu uses ->best_encoder internally, give it a local copy. It might be a good idea to merge the connector and encoder into one amdgpu_dm_sink structure, that might match DC internals better. At least for non-DPMST outputs. Kudos to Ville for spotting this. v3: Rebase onto a487411a ("drm/amd/display: Use DRM helper for best_encoder"). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-2-daniel.vetter@ffwll.ch
-
- Oct 05, 2018
-
-
Chris Wilson authored
Since commit 09ea0dfb ("dma-buf: make map_atomic and map function pointers optional"), we no longer need to provide stub no-op functions as the core now provides them directly. References: 09ea0dfb ("dma-buf: make map_atomic and map function pointers optional") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Daniel Vetter authored
Somehow I forgot a few when typing all the shiny new kerneldoc. Drop them. Reviewed-by:
-
Gerd Hoffmann authored
drm_connector_init doesn't attach the edid property for some connector types, drm_connector_attach_edid_property() can be used to enable the edid property in these cases. Signed-off-by:
-
- Oct 04, 2018
-
-
Manasi Navare authored
This patch explains the DRM_MODE_PROP_IMMUTABLE flag a bit better by telling which function to call if kernel wants to update drm object's immutable properties. Suggested-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
Daniel Vetter authored
Typed up all the items Rodrigo capture at the vkms workshop at xdc2018: https://etherpad.net/p/vkms_todo v2: Review from Rodrigo. - Add eBPF for atomic check, I forgot it. - Improve spelling. Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181003132103.29309-1-daniel.vetter@ffwll.ch
-
- Oct 03, 2018
-
-
Ville Syrjälä authored
Let's make the infoframe pack functions usable with a const infoframe structure. This allows us to precompute the infoframe earlier, and still pack it later when we're no longer allowed to modify the structure. So now we end up with a _check()+_pack_only() or _pack() functions depending on whether you want to precompute the infoframes or not. The names aren't great but I was lazy and didn't want to change all the drivers. v2: Deal with exynos churn Actually export the new funcs v3: Fix various documentation fails (Hans) Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by:
-
- Oct 02, 2018
-
-
Satendra Singh Thakur authored
Use the drm_display_mode_to_videomode function to calculate front/ back porches and sync length. Cc: Madhur Verma <madhur.verma@samsung.com> Cc: Hemanshu Srivastava <hemanshu.s@samsung.com> Signed-off-by:
Satendra Singh Thakur <satendra.t@samsung.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Acked-by:
-
Stefan Agner authored
The result of drm_crtc_index() is unused. Remove the call and the unused variable. Signed-off-by:
-
Ville Syrjälä authored
The log functions don't modify the passed in infoframe so make it const. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
To make sure the infoframe unpack functions don't end up examining stack garbage or oopsing, let's pass in the size of the buffer. v2: Convert tda1997x.c as well (kbuild test robot) Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
The unpack functions just read from the passed in buffer, so make it const. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by:
-
- Oct 01, 2018
-
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. For drm_modes.c, the full node path is already printed out, so printing just the node name a 2nd time is redundant and can be removed. Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Acked-by:
Rob Clark <robdclark@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. v2: * rebase onto fbdev rework Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20180926113623.22679-1-tzimmermann@suse.de Signed-off-by:
-
- Sep 30, 2018
-
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180926120650.25614-1-tzimmermann@suse.de
-
- Sep 28, 2018
-
-
Heiko Stuebner authored
The rk3328 uses a dw-hdmi controller with an external hdmi phy from Innosilicon which uses the generic phy framework for access. Add the necessary data and the compatible for the rk3328 to the rockchip dw-hdmi driver. changes in v5: - disable CEC_5V option to make CEC actually work (Jonas) changes in v3: - reword as suggested by Rob to show that it's a dw-hdmi + Inno phy Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
Zheng Yang <zhengyang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-7-heiko@sntech.de
-
Heiko Stuebner authored
When using special phy handling operations we'll often need access to the rockchip_hdmi struct. As the chip-data that occupies the phy_data pointer initially gets assigned to the rockchip_hdmi struct, we can now re-use this phy_data pointer to hold the reference to the rockchip_hdmi struct and use this reference later on. Inspiration for this comes from meson and sunxi dw-hdmi, which are using the same method. changes in v3: - reword commit message Signed-off-by:
-
Heiko Stuebner authored
Some variants of the dw-hdmi on Rockchip socs use a separate phy block accessed via the generic phy framework, so allow them to be included if such a phy reference is found. Signed-off-by:
-
Heiko Stuebner authored
Some newer Rockchip SoCs use an Innosilicon hdmiphy accessed via general mmio, so allow these to be referenced via the regular phy interfaces and therefore add optional phy-related properties to the binding. Signed-off-by:
-
