- Mar 14, 2014
-
-
Sylwester Nawrocki authored
Add a video capture node for the FIMC-IS ISP IP block. The Exynos4x12 FIMC-IS ISP IP block has 2 DMA interfaces that allow to capture raw Bayer and YUV data to memory. Currently only the DMA2 output is and raw Bayer data capture is supported. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sylwester Nawrocki authored
Add support for registering external sensor subdevs using v4l2-async API. The async API is used only for sensor subdevs and only for booting from DT. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds clock provider so the the SCLK_CAM0/1 output clocks can be accessed by image sensor devices through the clk API. Signed-off-by:
-
Sylwester Nawrocki authored
This patch removes the common fimc-is-sensor driver for image sensors that are normally controlled by the FIMC-IS firmware. The FIMC-IS driver now contains only a table of properties specific to each sensor. The sensor properties required for the ISP's firmware are parsed from device tree and retrieved from the internal table, which is selected based on the compatible property of an image sensor. To use the Exynos4x12 internal ISP the S5K6A3 sensor driver (drivers/ media/i2c/s5k6a3.c) is now required. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds the V4L2 asynchronous subdev registration and device tree support. Common clock API is used to control the sensor master clock from within the subdev. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds subdev driver for Samsung S5K6A3 raw image sensor. As it is intended at the moment to be used only with the Exynos FIMC-IS (camera ISP) subsystem it is pretty minimal subdev driver. It doesn't do any I2C communication since the sensor is controlled by the ISP and its own firmware. This driver, if needed, can be updated in future into a regular subdev driver where the main CPU communicates with the sensor directly. Signed-off-by:
-
Sylwester Nawrocki authored
This patch documents following updates of the Exynos4 SoC camera subsystem devicetree binding: - addition of #clock-cells and clock-output-names properties to 'camera' node - these are now needed so the image sensor sub-devices can reference clocks provided by the camera host interface, - dropped a note about required clock-frequency properties at the image sensor nodes; the sensor devices can now control their clock explicitly through the clk API and there is no need to require this property in the camera host interface binding. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sylwester Nawrocki authored
This adds DT binding documentation for Samsung S5C73M3 camera sensor with an embedded ISP. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds binding documentation for the Samsung S5K6A3(YX) raw image sensor. Signed-off-by:
-
Frank Schaefer authored
In all cases, when the first capture is called, we need to call the code that unmutes the volume. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Hans Verkuil authored
Update the DocBook files accordingly. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Hans Verkuil authored
Be more specific with regards to how some of these fields are interpreted. In particular the height value and which fields can be set by the application. Signed-off-by:
-
Hans Verkuil authored
This example driver uses all the latest frameworks and can serve as a starting point for a new V4L2 PCI driver. Originally written for a presentation on how to use V4L2 frameworks during FOSDEM 2014. Signed-off-by:
-
James Hogan authored
The calculated values for the minlen and maxlen fields, which were rounded to multiples of 2 and clamped to a valid range, were left unused. Use them in the calculation of the register value rather than using the raw input minlen and maxlen. This fixes the following warning with a W=1 build: drivers/media/rc/img-ir/img-ir-hw.c In function ‘img_ir_free_timing’: drivers/media/rc/img-ir/img-ir-hw.c +228 :23: warning: variable ‘maxlen’ set but not used [-Wunused-but-set-variable] drivers/media/rc/img-ir/img-ir-hw.c +228 :15: warning: variable ‘minlen’ set but not used [-Wunused-but-set-variable] Reported-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
James Hogan authored
The JVC timings included timings intended for the secondary decoder (which matches messages with no leader), however they were in the wrong part of the timings structure, repeating s00 and s01 rather than being in s10 and s11. Distinct repeat timings can't be properly supported yet for JVC anyway since the scancode callback cannot determine which decoder matched the message, so for now remove these timings and don't bother to enable the secondary decoder. This fixes the following warnings with W=1: drivers/media/rc/img-ir/img-ir-jvc.c +76 :3: warning: initialized field overwritten [-Woverride-init] drivers/media/rc/img-ir/img-ir-jvc.c +76 :3: warning: (near initialization for ‘img_ir_jvc.timings.s00’) [-Woverride-init] drivers/media/rc/img-ir/img-ir-jvc.c +81 :3: warning: initialized field overwritten [-Woverride-init] drivers/media/rc/img-ir/img-ir-jvc.c +81 :3: warning: (near initialization for ‘img_ir_jvc.timings.s01’) [-Woverride-init] Reported-by:
-
James Hogan authored
Fix a coccicheck warning in img-ir driver: drivers/media/rc/img-ir/img-ir-hw.c:500:2-3: Unneeded semicolon Signed-off-by:
-
Lad, Prabhakar authored
this patch fixes following build warning drivers/media/platform/davinci/vpbe_display.c: In function 'vpbe_start_streaming': drivers/media/platform/davinci/vpbe_display.c:344: warning: unused variable 'vpbe_dev' Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by:
-
Antti Palosaari authored
Realtek RTL2832 SDR driver. Currently in staging as SDR API is not ready. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Clamp bandwidth to nearest legal value in automode in order to pass v4l2-compliance test. Reported-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Fix rtl2832_sdr driver v4l2-compliance issues. Signed-off-by:
-
Antti Palosaari authored
Rename some variables. Change error status checks from (ret < 0) to (ret). No actual functionality changes. Signed-off-by:
-
Antti Palosaari authored
That comes possible after driver was converted to kernel I2C model (I2C binding & proper I2C client with no gate control hack). All nasty low level I2C routines are now covered by regmap. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
Gate control is now implemented by rtl2832 I2C adapter so we do not need proprietary DVB i2c_gate_ctrl() anymore. Signed-off-by:
-
Antti Palosaari authored
RTL2832 driver provides muxed I2C adapters for tuner bus I2C gate control. Pass those adapters to rtl2832_sdr and e4000 modules in order to get rid of proprietary DVB .i2c_gate_ctrl() callback use. Signed-off-by:
-
Antti Palosaari authored
We need depend on I2C_MUX as rtl2832 demod used requires it. All error/warnings: warning: (DVB_USB_RTL28XXU) selects DVB_RTL2832 which has unmet direct dependencies (MEDIA_SUPPORT && DVB_CORE && I2C && I2C_MUX) ERROR: "i2c_add_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined! ERROR: "i2c_del_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined! Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Antti Palosaari authored
Use break, not return, for every case. Signed-off-by:
-
Antti Palosaari authored
With that extension module it supports SDR. Signed-off-by:
-
Antti Palosaari authored
Optimize a little bit from data to text. Signed-off-by:
-
Antti Palosaari authored
E4000 tuner driver provides now some controls. Expose those to userland. Signed-off-by:
-
Antti Palosaari authored
Implement SDR driver for Realtek RTL2832U chip as a DVB extension module. SDR module is attached by DVB USB RTL28XXU driver as a DVB SEC (satellite equipment controller) module. Abusing unused SEC here has no harm as that is DVB-T only frontend. SDR functionality is provided by RTL2832 DVB-T demodulator. I suspect it is originally planned for DAB and FM, but it could be abused general SDR, due to modern silicon tuners that has wide frequency range and a lot of configurable parameters (filters, gains, ...). http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/44461 Signed-off-by:
-
Antti Palosaari authored
Implement PLL lock control to get PLL lock flag status from tuner synthesizer. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
There was 32-bit overflow on VCO frequency calculation which blocks tuning to 1073 - 1104 MHz. Use 64 bit number in order to avoid VCO frequency overflow. After that fix device in question tunes to following range: 60 - 1104 MHz 1250 - 2207 MHz Signed-off-by:
-
Antti Palosaari authored
Implement gain and bandwidth controls using v4l2 control framework. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
Driver conversion from proprietary DVB tuner model to more general I2C driver model. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
- Mar 13, 2014
-
-
Kees Cook authored
rc_map_get() takes a single string literal for the module to load, so make sure it cannot be used as a format string in the call to request_module(). Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Hans Verkuil authored
The sizeimage is that of a single field, not that of a full frame. That makes no sense, and in fact all drivers supporting ALTERNATE will set sizeimage to that of a field. Signed-off-by:
-
Hans Verkuil authored
Be more specific as to who has to fill in each field/flag: the driver or the application. Signed-off-by:
-
Hans Verkuil authored
The code said for (i = 0; i > 30; ++i) instead of i < 30. Fix this and clean it up a bit at the same time. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Antti Palosaari authored
Rename v4l2_format_sdr to v4l2_sdr_format in order to keep it in line with other formats. Reported-by:
-
