- Aug 31, 2015
-
-
Sagi Grimberg authored
iser_reg_rdma_mem_[fastreg|fmr] share a lot of code, and logically do the same thing other than the buffer registration method itself (iser_fast_reg_mr vs. iser_fast_reg_fmr). The DIF logic is not implemented in the FMR flow as there is no existing device that supports FMRs and Signature feature. This patch unifies the flow in a single routine iser_reg_rdma_mem and just split to fmr/frwr for the buffer registration itself. Also, for symmetry reasons, unify iser_unreg_rdma_mem (which will call the relevant device specific unreg routine). Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Adir Lev <adirl@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Sagi Grimberg authored
As for fmrs we will hold a single registration descriptor as no need for multiple like in the frwr mode (descriptor for each task). This change helps unifying the duplicate registration code paths. Signed-off-by:
-
Sagi Grimberg authored
Also, change a name of a local variable. This patch does not change any functionality. Signed-off-by:
-
Adir Lev authored
This will allow us to unify the memory registration code path between the various methods which vary by the device capabilities. This change will make it easier and less intrusive to remove fmr_pools from the code when we'd want to. The reason we use a single descriptor is to avoid taking a redundant spinlock when working with FMRs. We also change the signature of iser_reg_page_vec to make it match iser_fast_reg_mr (and the future indirect registration method). Signed-off-by:
-
Sagi Grimberg authored
Instead of having it a part of the connection structure, have it be under a dedicated (embedded) structure in the connection. A logical separation of the registration pool and the connection structure. Signed-off-by:
-
Sagi Grimberg authored
Don't have the caller allocate the structure and worry about freeing it in case the routine failed. This patch does not change any functionality. Signed-off-by:
-
Sagi Grimberg authored
Move all the per-device function pointers to an easy extensible iser_reg_ops structure that contains all the iser registration operations. Signed-off-by:
-
Sagi Grimberg authored
In the past the we always tried to allocate an fmr_pool and if it failed on ENOSYS (not supported) then we continued with dma mr. This is not the case anymore and if we tried to allocate an fmr_pool then it is supported and we expect to succeed. Also, the check if fmr_pool is allocated when free is called is redundant as well as we are guaranteed it exists. Signed-off-by:
-
Sagi Grimberg authored
Avoid struct names without iser_ prefix. This patch does not change any functionality. Signed-off-by:
-
Sagi Grimberg authored
Have fast_reg_descriptor hold struct iser_reg_resources (mr, frpl, valid flag). This will be useful when the actual buffer registration routines will be passed with the needed registration resources (i.e. iser_reg_resources) without being aware of their nature (i.e. data or protection). In order to achieve this, we remove reg_indicators flags container and place specific flags (mr_valid) within iser_reg_resources struct. We also place the sig_mr_valid and sig_protcted flags in iser_pi_context. This patch also modifies iser_fast_reg_mr to receive the reg_resources instead of the fast_reg_descriptor and a data/protection indicator. Signed-off-by:
-
Sagi Grimberg authored
We can do it in iser_aligned_data_len instead and it will save us an argument that is passed to fall_to_counce_buf just for the print. Signed-off-by:
-
Sagi Grimberg authored
We always call iser_initialize_task_headers() and set the header tx_sg.lkey to the device mr lkey, so no point in checking it in iser_create_send_desc(). Signed-off-by:
-
Sagi Grimberg authored
If iser_initialize_task_headers() routine failed before dma mapping, we should not attempt to unmap in cleanup_task(). Fixes: 7414dde0 (IB/iser: Fix race between iser connection ...) Signed-off-by:
-
Sagi Grimberg authored
We don't update those anywhere in the code and they seem pretty useless (no one seem to care about those). qp_tx_queue_full: We never should get this fmr_map_not_avail: We can never get to this eh_abort_cnt: We don't monitor aborts Go ahead and remove them. Signed-off-by:
-
Sagi Grimberg authored
Since commit "IB/iser: Fix race between iser connection teardown..." iser_initialize_task_headers() might fail, so we need to check that. Fixes: 7414dde0 (IB/iser: Fix race between iser connection ...) Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Jenny Falkovich authored
While we're at it, use permission defines instead of octal values and rearrange a little bit. Signed-off-by:
Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by:
-
Kaike Wan authored
This patch routes a SA pathrecord query to netlink first and processes the response appropriately. If a failure is returned, the request will be sent through IB. The decision whether to route the request to netlink first is determined by the presence of a listener for the local service netlink multicast group. If the user-space local service netlink multicast group listener is not present, the request will be sent through IB, just like what is currently being done. Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
John Fleck <john.fleck@intel.com> Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Kaike Wan authored
Replace kmalloc with kzalloc so that all uninitialized fields in SA query will be zero-ed out to avoid unintentional consequence. This prepares the SA query structure to accept new fields in the future. Signed-off-by:
-
Kaike Wan authored
This patch adds a function to check if listeners for a netlink multicast group are present. It also adds a function to receive netlink response messages. Signed-off-by:
-
Kaike Wan authored
This patch adds netlink defines for local service client, local service group, local service operations, and related attributes. Signed-off-by:
-
Bart Van Assche authored
scsi_host_alloc() not only allocates memory for a SCSI host but also creates the scsi_eh_<n> kernel thread and the scsi_tmf_<n> workqueue. Stop these threads if login fails by calling scsi_host_put(). Reported-by:
Konstantin Krotov <kkv@clodo.ru> Fixes: fb49c8bb ("Remove an extraneous scsi_host_put() from an error path") Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com> Cc: <stable@vger.kernel.org> #v3.19 Signed-off-by:
-
Bart Van Assche authored
Since version 1.0 e.g. scsi-mq has been added. Since this is a significant change, bump the driver version and release date. Signed-off-by:
-
Bart Van Assche authored
Avoid that the following kernel warning is reported if the SRP target system accepts fewer channels per connection than what was requested by the initiator system: WARNING: at drivers/infiniband/ulp/srp/ib_srp.c:617 srp_destroy_qp+0xb1/0x120 [ib_srp]() Call Trace: [<ffffffff8105d67f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8105d6da>] warn_slowpath_null+0x1a/0x20 [<ffffffffa05419e1>] srp_destroy_qp+0xb1/0x120 [ib_srp] [<ffffffffa05445fb>] srp_create_ch_ib+0x19b/0x420 [ib_srp] [<ffffffffa0545257>] srp_create_target+0x7d7/0xa94 [ib_srp] [<ffffffff8138dac0>] dev_attr_store+0x20/0x30 [<ffffffff812079ef>] sysfs_write_file+0xef/0x170 [<ffffffff81191fc4>] vfs_write+0xb4/0x130 [<ffffffff8119276f>] sys_write+0x5f/0xa0 [<ffffffff815a0a59>] system_call_fastpath+0x16/0x1b Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Ariel Nahum authored
When handling a device internal error, the driver is responsible to drain the completion queue with flush errors. In case a completion queue was assigned to multiple send queues, the driver iterates over the send queues and generates flush errors of inflight wqes. The driver must correctly pass the wc array with an offset as a result of the previous send queue iteration. Not doing so will overwrite previously set completions and return a wrong number of polled completions which includes ones which were not correctly set. Fixes: 35f05dab (IB/mlx4: Reset flow support for IB kernel ULPs) Signed-off-by:
Ariel Nahum <arieln@mellanox.com> Signed-off-by:
-
Noa Osherovich authored
The mlx4 IB driver implementation for ib_query_ah used a wrong offset (28 instead of 29) when link type is Ethernet. Fixed to use the correct one. Fixes: fa417f7b ('IB/mlx4: Add support for IBoE') Signed-off-by:
Shani Michaeli <shanim@mellanox.com> Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
The pkey mapping for RoCE must remain the default mapping: VFs: virtual index 0 = mapped to real index 0 (0xFFFF) All others indices: mapped to a real pkey index containing an invalid pkey. PF: virtual index i = real index i. Don't allow users to change these mappings using files found in sysfs. Fixes: c1e7e466 ('IB/mlx4: Add iov directory in sysfs under the ib device') Signed-off-by:Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Jack Morgenstein authored
The mcg "too many pending requests" warning message fills the log when OpenSM is downed. Demote the message from warning level to debug level. Signed-off-by:
-
Jack Morgenstein authored
send_mad_to_wire takes the same spinlock that is taken in the interrupt context. Therefore, it needs irqsave/restore. Fixes: b9c5d6a6 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV') Signed-off-by:
-
Doug Ledford authored
Signed-off-by: -
Somnath Kotur authored
1.Change query_gid hook to return value from IB/Core GID management APIs. 2.Get rid of all the netdev notifier chain subscription code as well as maintenance of SGID Table in memory. 3.Implement get_netdev hook in driver. Signed-off-by:
Somnath Kotur <somnath.kotur@avagotech.com> Signed-off-by:
Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by:
-
Moni Shoua authored
Manage RoCE gid table with logic in IB/core, which is common to all vendors, and remove the mechanism from the mlx4 IB driver. Since management of the GID cache may lead to index mismatch with the hardware GID table, a translation between indexes is required when modifying a QP or creating an address handle. Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Moni Shoua authored
get_netdev: get the net_device on the physical port of the IB transport port. In port aggregation mode it is required to return the netdev of the active port. modify_gid: note for a change in the RoCE gid cache. Handle this by writing to the harsware GID table. It is possible that indexes in cahce and hardware tables won't match so a translation is required when modifying a QP or creating an address handle. Signed-off-by:
-
Moni Shoua authored
The mlx4 network driver was registered in the context of the 'add' function of the core driver (called when HW should be registered). This makes the netdev event NETDEV_REGISTER to be sent in a context where the answer to get_protocol_dev() callback returns NULL. This may be confusing to listeners of netdev events. This patch is a preparation to the patch that implements the get_netdev() callback in the IB/mlx4 driver. Signed-off-by:
-
Matan Barak authored
Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
Smatch says that, based on the indenting, we should probably add curly braces here. Fixes: 03db3a2d ('IB/core: Add RoCE GID table management') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Matan Barak authored
RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: -
Jason Gunthorpe authored
This gets rid of the weird in-between state where struct ib_device was allocated but the kobject didn't work. Consequently ib_device_release is now guaranteed to be called in all situations and we needn't duplicate its kfrees on error paths. Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
