- Apr 09, 2020
-
-
Isabel Zhang authored
[Why] Due to previous code changes, displays transition from active to active and added state immediately, making it redundant to have both display states. Previous change to fix this caused HDCP to get into a bad state when monitor is connected to MST hub, this change fixes that issue. [How] Change code behavior so when a device is added successfully the state remains as active and when addition is unsuccessful change state to inactive. This removes need for added and active state. Signed-off-by:
Isabel Zhang <isabel.zhang@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Wyatt Wood authored
[Why] Driver must pass abm config table to dmub fw. This provides various parameters for abm functionality. [How] There is too much data to be passed in an inbox message, so we must pass this data using an indirect buffer. Copy the table to cw7 via x86, driver copies to fw_state structure. Signed-off-by:
Wyatt Wood <wyatt.wood@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Tony Cheng <Tony.Cheng@amd.com> Signed-off-by:
-
Nikola Cornij authored
[why] Link or DIG BE can't be exposed to a higher stream bandwidth than they can handle. When DSC is required to fit the stream into the link bandwidth, DSC has to be programmed before the link is enabled to ensure this. Without it, intermittent issues such as black screen after S3 or a hot-plug can be seen with DSC timings like 4k144Hz or 8k60Hz. [how] Move DSC programming from before enabling stream to before enabling link Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Josip Pavic authored
[Why] If no free pipes are available, acquire_first_split_pipe is called to get a pipe to use. This call may alter the ordering of the pipes in the list so that, for example, the tail pipe changes. If acquire_first_split_pipe returns the tail pipe, we'll have free_pipe == tail_pipe. What tail_pipe refers to is not the current tail_pipe, but what was previously the tail pipe - i.e. prior to the call to acquire_first_split_pipe The logic that follows will link free_pipe to the tail pipe, referring to the current tail pipe. However, since tail_pipe is cached from before the call to acquire_first_split_pipe, the wrong tail pipe will be used, and it will end up being linked to itself, creating a loop that, if traversed, will result in a soft hang. [How] Do not cache the tail pipe. Instead, check the tail pipe after the call to acquire_first_split_pipe is made. Signed-off-by:
Josip Pavic <Josip.Pavic@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Aric Cyr authored
Signed-off-by:
-
Jack Zhang authored
[PATCH 2/2] kfd_pre_reset will free mem_objs allocated by kfd_gtt_sa_allocate Without this change, sriov tdr code path will never free those allocated memories and get memory leak. Signed-off-by:
Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by:
Monk Liu <monk.liu@amd.com> Signed-off-by:
-
Jack Zhang authored
This reverts commit 5161bba4311f in order to split it into two different patches, and this will make it easier to understand. [PATCH 1/2] porting to gfx10 from commit 1b0bfcff ("drm/amdgpu: Avoid destroy hqd when GPU is on reset") Originally, MEC is touched without GPU initialized first. Signed-off-by:
-
John Clements authored
prefix RAS error related dmesg print with pci device info Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
John Clements authored
upon receiving uncorrectable error, query every GPU node for ras errors Reviewed-by:
-
Chengming Gui authored
Incorrect CG sequence will cause gfx timedout, if we keep switching power profile mode (enter profile mod such as PEAK will disable CG, exit profile mode EXIT will enable CG) when run Vulkan test case(case used for test: vkexample). Signed-off-by:
Chengming Gui <Jack.Gui@amd.com> Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Acked-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Tianci.Yin authored
Add RLC_SPM golden settings Reviewed-by:
Tianci.Yin <tianci.yin@amd.com> Signed-off-by:
-
Tianci.Yin authored
Add RLC_SPM golden settings Reviewed-by:
-
Tianci.Yin authored
Add RLC_SPM golden settings Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Oak Zeng authored
UTCL2 client ID is useful information to get which UTCL2 client caused the gpuvm fault. Print it out for debug purpose Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
Christian Konig <christian.koenig@amd.com> Signed-off-by:
-
Nirmoy Das authored
Util -> Until Fixes: 567c8fc4 ("drm/amd/powerplay: implement the is_dpm_running()") Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
James Zhu authored
VCN shared memory needs restore after wake up during S3 test. v2: Allocate shared memory saved_bo at sw_init and free it in sw_fini. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
-
Aaron Ma authored
On ARCTURUS and RENOIR, powerplay is not supported yet. When plug in or unplug power jack, ACPI event will issue. Then kernel NULL pointer BUG will be triggered. Check for NULL pointers before calling. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
-
Alex Deucher authored
Replace dev_warn() with dev_info() and note that they are optional to avoid confusing users. The RAS TAs only exist on server boards and the HDCP and DTM TAs only exist on client boards. They are optional either way. Acked-by:
-
Nirmoy Das authored
Generate HW IP's sched_list in amdgpu_ring_init() instead of amdgpu_ctx.c. This makes amdgpu_ctx_init_compute_sched(), ring.has_high_prio and amdgpu_ctx_init_sched() unnecessary. This patch also stores sched_list for all HW IPs in one big array in struct amdgpu_device which makes amdgpu_ctx_init_entity() much more leaner. v2: fix a coding style issue do not use drm hw_ip const to populate amdgpu_ring_type enum v3: remove ctx reference and move sched array and num_sched to a struct use num_scheds to detect uninitialized scheduler list v4: use array_index_nospec for user space controlled variables fix possible checkpatch.pl warnings Signed-off-by:
-
Nirmoy Das authored
Use AMDGPU_HW_IP_* to set amdgpu_ring_type enum values Signed-off-by:
-
Jack Zhang authored
kfd_pre_reset will free mem_objs allocated by kfd_gtt_sa_allocate Without this change, sriov tdr code path will never free those allocated memories and get memory leak. v2:add a bugfix for kiq ring test fail Signed-off-by:
-
- Apr 04, 2020
-
-
Yifan Zhang authored
Add missing braces. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
-
Tiecheng Zhou authored
hwmgr->pm_en is initialized at hwmgr_hw_init. during amdgpu_device_init, there is amdgpu_asic_reset that calls to pp_get_asic_baco_capability, while hwmgr->pm_en has not yet been initialized. so avoid using pm_en in pp_get_asic_baco_capability. Reviewed-by:
Emily Deng <Emily.Deng@amd.com> Signed-off-by:
Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by:
Yintian Tao <yttao@amd.com> Signed-off-by:
-
Prike Liang authored
As the pmfw hasn't exported the interface of SMU feature mask to APU SKU so just force on all the features to driver inquired interface at early initial stage. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Shirish S authored
Fixes build error of: "use of undeclared identifier 'RENOIR_A0'" To fix the same, this patch re-orders the ASIC declarations accordingly. Fixes: 41ef3dcd ("drm/amd/display: Fix RV2 Variant Detection") Signed-off-by:
Shirish S <shirish.s@amd.com> Reviewed-by:
Zhan Liu <zhan.liu@amd.com> Signed-off-by:
-
Yuxian Dai authored
1.Using the FCLK DPM table to set the MCLK for DPM states consist of three entities: FCLK UCLK MEMCLK All these three clk change together, MEMCLK from FCLK, so use the fclk frequency. 2.we should show the current working clock freqency from clock table metric Signed-off-by:
Yuxian Dai <Yuxian.Dai@amd.com> Reviewed-by:
Kevin Wang <Kevin1.Wang@amd.com> Signed-off-by:
-
Alex Sierra authored
Navi ASICs don't require to access through PSP to osssys registers. This on SR-IOV configuration. Signed-off-by:
Alex Sierra <alex.sierra@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] The buffer used when calling psp is a shared buffer. If we have multiple calls at the same time we can overwrite the buffer. [How] Add mutex to guard the shared buffer. Signed-off-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by:
-
Bhawanpreet Lakha authored
It is not being used, so remove it Signed-off-by:
-
- Apr 02, 2020
-
-
Lyude Paul authored
DRM already supports tracing DPCD transactions, there's no reason for the existence of this function. Also, it prints one byte per-line which is way too loud. So, just remove it. Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Lyude Paul authored
We already trace DPCD reads/writes on both MST and SST, there's no reason to have this code here (plus, toggling these things with a define at the top of the file isn't how we do things in the kernel). Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Christian König authored
The problem is that we can't add the clear fence to the BO when there is an exclusive fence on it since we can't guarantee the the clear fence will complete after the exclusive one. To fix this refactor the function and also add the exclusive fence as shared to the resv object. v2: fix warning v3: add excl fence as shared instead v4: squash in fix for fence handling in amdgpu_gem_object_close Signed-off-by:
xinhui pan <xinhui.pan@amd.com> Signed-off-by:
-
Melissa Wen authored
Removes codestyle issues in dc_link file, on dc_link_construct and translate_encoder_to_transmitter as suggested by checkpatch.pl. Types covered: CHECK: Lines should not end with a '(' WARNING: Missing a blank line after declarations CHECK: Alignment should match open parenthesis CHECK: Comparison to NULL could be written CHECK: Logical continuations should be on the previous line CHECK: Blank lines aren't necessary after an open brace '{' Signed-off-by:Melissa Wen <melissa.srw@gmail.com> Signed-off-by:
-
Melissa Wen authored
Removes codestyle issues on the file dc_link between is_same_edid and get_ddc_line as suggested by checkpatch.pl. Types covered: CHECK: Blank lines aren't necessary after an open brace '{' CHECK: Blank lines aren't necessary before a close brace '}' WARNING: braces {} are not necessary for single statement blocks CHECK: Comparison to NULL could be written CHECK: Lines should not end with a '(' CHECK: Alignment should match open parenthesis CHECK: Using comparison to false is error prone CHECK: Using comparison to true is error prone WARNING: Avoid multiple line dereference - prefer 'link->dpcd_caps.sink_count.bits.SINK_COUNT' CHECK: Unnecessary parentheses around WARNING: Missing a blank line after declarations Signed-off-by: -
Melissa Wen authored
Removes codestyle issues on the file dc_link until detect_dp func as suggested by checkpatch.pl. Types covered: CHECK: Please don't use multiple blank lines CHECK: Comparison to NULL could be written ERROR: space required before the open parenthesis '(' CHECK: Alignment should match open parenthesis CHECK: Lines should not end with a '(' WARNING: please, no space before tabs WARNING: Comparisons should place the constant on the right side of the test WARNING: braces {} are not necessary for single statement blocks CHECK: Please don't use multiple blank lines Signed-off-by: -
Melissa Wen authored
Solve comments alignment problems on dc_link file Signed-off-by:
-
James Zhu authored
Enable VCN2.5 DPG mode for arcturus after below items are applied. ASD: 0x21000023 SOS: 0x17003B VCN firmware Version ENC: 1.1 DEC: 1 VEP: 0 Revision: 16 VBIOS: 23 Signed-off-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
James Zhu authored
Add firmware write/read point reset sync through shared memory Signed-off-by:
-
James Zhu authored
Add firmware write/read point reset sync through shared memory Signed-off-by:
-
