- Aug 20, 2013
-
-
Stefan Huber authored
Corrected the word configation to configuration. Signed-off-by:
Stefan Huber <steffhip@gmail.com> Signed-off-by:
Matthias Schid <aircrach115@gmail.com> Signed-off-by:
Simon Puels <simon.puels@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Stefan Huber authored
Corrected the word adventerous to adventurous. Signed-off-by:
-
Stefan Huber authored
Corrected the word osciallator to oscillator in the file st,nomadik.txt. Signed-off-by:
-
Stefan Huber authored
Corrected the word compatbile to compatible in the file atmel-can.txt. Signed-off-by:
-
Cristian Stoica authored
Signed-off-by:
Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by:
-
- Aug 05, 2013
-
-
Chris Cheney authored
Small clean-up for my CREDITS entry. Signed-off-by:
Chris Cheney <chris.cheney@gmail.com> Signed-off-by:
-
- Jul 30, 2013
-
-
Chen Gang authored
'#else' is useless, need remove. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
- Jul 25, 2013
-
-
Martin Nordholts authored
Both old URLs are broken, so update them. Signed-off-by:
Martin Nordholts <enselic@gmail.com> Acked-by:
Rob Landley <rob@landley.net> Signed-off-by:
-
Yacine Belkadi authored
When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(include/linux/ktime.h:75): No description found for return value of 'ktime_set' Fix them by using a "Return:" section to describe the return values. (Also apply some minor reformatting along the way.) Signed-off-by:
Yacine Belkadi <yacine.belkadi.1@gmail.com> Acked-by:
-
Masanari Iida authored
Correct typo (double words) in documentations. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Sachin Kamat authored
Fixes a trivial typo. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Masanari Iida authored
Correct spelling typo in devicetree/bindings. Singed-off-by:
-
Jiri Kosina authored
Sync with Linus' master to be able to apply trivial patche to newer code. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Ben Herrenschmidt: "Here is a series of powerpc fixes. It's a bit big, mostly because of the series of 11 "EEH" patches from Gavin. The EEH (Our IBM specific PCI/PCIe Enhanced Error Handling) code had been rotting for a while and this merge window saw a significant rework & fixing of it by Gavin Shan. However, that wasn't complete and left some open issues. There were still a few corner cases that didn't work properly, for example in relation to hotplug and devices without explicit error handlers. We had some patches but they weren't quite good enough yet so I left them off the 3.11 merge window. Gavin since then fixed it all up, we ran quite a few rounds of testing and it seems fairly solid (at least probably more than it has ever been). This should probably have made -rc1 but both Gavin and I took some vacation so it had to wait for -rc2. The rest is more bug fixes, mostly to new features recently added, for example, we missed the cpu table entry for one of the two models of P8 (we didn't realize they had different PVR [Processor Version Register] values), some module CRC issues, etc..." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (23 commits) powerpc/perf: BHRB filter configuration should follow the task powerpc/perf: Ignore separate BHRB privilege state filter request powerpc/powernv: Mark pnv_pci_init_ioda2_phb() as __init powerpc/mm: Use the correct SLB(LLP) encoding in tlbie instruction powerpc/mm: Fix fallthrough bug in hpte_decode powerpc/pseries: Fix a typo in pSeries_lpar_hpte_insert() powerpc/eeh: Introdce flag to protect sysfs powerpc/eeh: Fix unbalanced enable for IRQ powerpc/eeh: Don't use pci_dev during BAR restore powerpc/eeh: Use partial hotplug for EEH unaware drivers powerpc/pci: Partial tree hotplug support powerpc/eeh: Use safe list traversal when walking EEH devices powerpc/eeh: Keep PE during hotplug powerpc/pci/hotplug: Don't need to remove from EEH cache twice powerpc/pci: Override pcibios_release_device() powerpc/eeh: Export functions for hotplug powerpc/eeh: Remove reference to PCI device powerpc: Fix the corrupt r3 error during MCE handling. powerpc/perf: Set PPC_FEATURE2_EBB when we register the power8 PMU powerpc/pseries: Drop "select HOTPLUG" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This push fixes a memory corruption issue in caam, as well as reverting the new optimised crct10dif implementation as it breaks boot on initrd systems. Hopefully crct10dif will be reinstated once the supporting code is added so that it doesn't break boot" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework" crypto: caam - Fixed the memory out of bound overwrite issue
-
- Jul 24, 2013
-
-
Herbert Xu authored
This reverts commits 67822649 39761214 0b95a7f8 31d93962 2d31e518 Unfortunately this change broke boot on some systems that used an initrd which does not include the newly created crct10dif modules. As these modules are required by sd_mod under certain configurations this is a serious problem. Signed-off-by:Herbert Xu <herbert@gondor.apana.org.au>
-
Anshuman Khandual authored
When the task moves around the system, the corresponding cpuhw per cpu strcuture should be popullated with the BHRB filter request value so that PMU could be configured appropriately with that during the next call into power_pmu_enable(). Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anshuman Khandual authored
Completely ignore BHRB privilege state filter request as we are already configuring that with privilege state filtering attribute for the accompanying PMU event. This would help achieve cleaner user space interaction for BHRB. This patch fixes a situation like this Before patch:- ------------ ./perf record -j any -e branch-misses:k ls Error: The sys_perf_event_open() syscall returned with 95 (Operation not supported) for event (branch-misses:k). /bin/dmesg may provide additional information. No CONFIG_PERF_EVENTS=y kernel support configured? Here 'perf record' actually copies over ':k' filter request into BHRB privilege state filter config and our previous check in kernel would fail that. After patch:- ------------- ./perf record -j any -e branch-misses:k ls perf perf.data perf.data.old test-mmap-ring [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (~102 samples)] Signed-off-by:
-
Bjorn Helgaas authored
Mark pnv_pci_init_ioda2_phb() as __init. It is called only from an init function (pnv_pci_init()), and it calls an init function (pnv_pci_init_ioda_phb()): pnv_pci_init # init pnv_pci_init_ioda2_phb # non-init pnv_pci_init_ioda_phb # init This should fix a section mismatch warning. Signed-off-by:Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Aneesh Kumar K.V authored
The sllp value is stored in mmu_psize_defs in such a way that we can easily OR the value to get the operand for slbmte instruction. ie, the L and LP bits are not contiguous. Decode the bits and use them correctly in tlbie. regression is introduced by 1f6aaacc "powerpc: Update tlbie/tlbiel as per ISA doc" Reported-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
We should not fallthrough different case statements in hpte_decode. Add break statement to break out of the switch. The regression is introduced by dcda287a "powerpc/mm: Simplify hpte_decode" Reported-by:
-
Denis Kirjanov authored
Commit 801eb73f introduced a bug while checking PTE flags. We have to drop the _PAGE_COHERENT flag when __PAGE_NO_CACHE is set and the cache update policy is not write-through (i.e. _PAGE_WRITETHRU is not set) Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Reviewed-by:
-
Gavin Shan authored
The patch introduces flag EEH_DEV_SYSFS to keep track that the sysfs entries for the corresponding EEH device (then PCI device) has been added or removed, in order to avoid race condition. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
-
Gavin Shan authored
The patch fixes following issue: Unbalanced enable for IRQ 23 ------------[ cut here ]------------ WARNING: at kernel/irq/manage.c:437 : NIP [c00000000016de8c] .__enable_irq+0x11c/0x140 LR [c00000000016de88] .__enable_irq+0x118/0x140 Call Trace: [c000003ea1f23880] [c00000000016de88] .__enable_irq+0x118/0x140 (unreliable) [c000003ea1f23910] [c00000000016df08] .enable_irq+0x58/0xa0 [c000003ea1f239a0] [c0000000000388b4] .eeh_enable_irq+0xc4/0xe0 [c000003ea1f23a30] [c000000000038a28] .eeh_report_reset+0x78/0x130 [c000003ea1f23ac0] [c000000000037508] .eeh_pe_dev_traverse+0x98/0x170 [c000003ea1f23b60] [c0000000000391ac] .eeh_handle_normal_event+0x2fc/0x3d0 [c000003ea1f23bf0] [c000000000039538] .eeh_handle_event+0x2b8/0x2c0 [c000003ea1f23c90] [c000000000039600] .eeh_event_handler+0xc0/0x170 [c000003ea1f23d30] [c0000000000da9a0] .kthread+0xf0/0x100 [c000003ea1f23e30] [c00000000000a1dc] .ret_from_kernel_thread+0x5c/0x80 Signed-off-by:
-
Gavin Shan authored
While restoring BARs for one specific PCI device, the pci_dev instance should have been released. So it's not reliable to use the pci_dev instance on restoring BARs. However, we still need some information (e.g. PCIe capability position, header type) from the pci_dev instance. So we have to store those information to EEH device in advance. Signed-off-by:
-
Gavin Shan authored
When EEH error happens to one specific PE, some devices with drivers supporting EEH won't except hotplug on the device. However, there might have other deivces without driver, or with driver without EEH support. For the case, we need do partial hotplug in order to make sure that the PE becomes absolutely quite during reset. Otherise, the PE reset might fail and leads to failure of error recovery. The current code doesn't handle that 'mixed' case properly, it either uses the error callbacks to the drivers, or tries hotplug, but doesn't handle a PE (EEH domain) composed of a combination of the two. The patch intends to support so-called "partial" hotplug for EEH: Before we do reset, we stop and remove those PCI devices without EEH sensitive driver. The corresponding EEH devices are not detached from its PE, but with special flag. After the reset is done, those EEH devices with the special flag will be scanned one by one. Signed-off-by:
-
Gavin Shan authored
When EEH error happens to one specific PE, the device drivers of its attached EEH devices (PCI devices) are checked to see the further action: reset with complete hotplug, or reset without hotplug. However, that's not enough for those PCI devices whose drivers can't support EEH, or those PCI devices without driver. So we need do so-called "partial hotplug" on basis of PCI devices. In the situation, part of PCI devices of the specific PE are unplugged and plugged again after PE reset. The patch changes pcibios_add_pci_devices() so that it can support full hotplug and so-called "partial" hotplug based on device-tree or real hardware. It's notable that pci_of_scan.c has been changed for a bit in order to support the "partial" hotplug based on dev-tree. Most of the generic code already supports that, we just need to plumb it properly on our side. Signed-off-by:
-
Gavin Shan authored
Currently, we're trasversing the EEH devices list using list_for_each_entry(). That's not safe enough because the EEH devices might be removed from its parent PE while doing iteration. The patch replaces that with list_for_each_entry_safe(). Signed-off-by:
-
Gavin Shan authored
When we do normal hotplug, the PE (shadow EEH structure) shouldn't be kept around. However, we need to keep it if the hotplug an artifial one caused by EEH errors recovery. Since we remove EEH device through the PCI hook pcibios_release_device(), the flag "purge_pe" passed to various functions is meaningless. So the patch removes the meaningless flag and introduce new flag "EEH_PE_KEEP" to save the PE while doing hotplug during EEH error recovery. Signed-off-by:
-
Gavin Shan authored
Since pcibios_release_device() called by pci_stop_and_remove_bus_device() has removed the device from the EEH cache, we needn't do that again. Cc: Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Gavin Shan authored
The patch overrides pcibios_release_device() to release EEH resources (EEH cache, unbinding EEH device) for the indicated PCI device. Signed-off-by:
-
Gavin Shan authored
Make some functions public in order to support hotplug on either specific PCI bus or PCI device in future. Signed-off-by:
-
Gavin Shan authored
We will rely on pcibios_release_device() to remove the EEH cache and unbind EEH device for the specific PCI device. So we shouldn't hold the reference to the PCI device from EEH cache and EEH device. Otherwise, pcibios_release_device() won't be called as we expected. The patch removes the reference to the PCI device in EEH core. Signed-off-by:
-
Mahesh Salgaonkar authored
During Machine Check interrupt on pseries platform, R3 generally points to memory region inside RTAS (FWNMI) area. We see r3 corruption because when RTAS delivers the machine check exception it passes the address inside FWNMI area with the top most bit set. This patch fixes this issue by masking top two bit in machine check exception handler. Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Michael Ellerman authored
The presence or absence of EBB is advertised to userspace via the presence or absence of PPC_FEATURE2_EBB in cpu_user_features2. Because the kernel can be built without PMU support, we should only add PPC_FEATURE2_EBB to cpu_user_features2 when we successfully register the power8 PMU support. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Paul Bolle authored
The Kconfig symbol HOTPLUG was removed with commit 40b31360 ("Finally eradicate CONFIG_HOTPLUG"). But there's still one select statement for that symbol. It seems that select statement was added after the patch to remove CONFIG_HOTPLUG was submitted. Anyhow, it is useless and can be dropped. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Reviewed-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
-
Tiejun Chen authored
In hard_irq_disable(), we accessed the PACA before we hard disabled the interrupts, potentially causing a warning as get_paca() will us debug_smp_processor_id(). Move that to after the disabling, and also use local_paca directly rather than get_paca() to avoid several redundant and useless checks. Signed-off-by:
Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by:
-
Anton Blanchard authored
Module CRCs are implemented as absolute symbols that get resolved by a linker script. We build an intermediate .o that contains an unresolved symbol for each CRC. genksysms parses this .o, calculates the CRCs and writes a linker script that "resolves" the symbols to the calculated CRC. Unfortunately the ppc64 relocatable kernel sees these CRCs as symbols that need relocating and relocates them at boot. Commit d4703aef (module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y) added a hook to reverse the bogus relocations. Part of this patch created a symbol at 0x0: # head -2 /proc/kallsyms 0000000000000000 T reloc_start c000000000000000 T .__start This reloc_start symbol is causing lots of confusion to perf. It thinks reloc_start is a massive function that stretches from 0x0 to 0xc000000000000000 and we get various cryptic errors out of perf, including: problem incrementing symbol count, skipping event This patch removes the reloc_start linker script label and instead defines it as PHYSICAL_START. We also need to wrap it with CONFIG_PPC64 because the ppc32 kernel can set a non zero PHYSICAL_START at compile time and we wouldn't want to subtract it from the CRCs in that case. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Michael Neuling authored
POWER8 comes with two different PVRs. This patch enables the additional PVR in the cputable. The existing entry (PVR=0x4b) is renamed to POWER8E and the new entry (PVR=0x4d) is given POWER8. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fix from Tony Luck: "Fix EDAC lockdep splat" * tag 'please-pull-bp-edac' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC: Fix lockdep splat
-
