- Sep 13, 2012
-
-
Jens Taprogge authored
Signed-off-by:
Jens Taprogge <jens.taprogge@taprogge.org> Signed-off-by:
Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Taprogge authored
Make use of dev_set_drvdata() and dev_get_drvdata() to store and obtain a pointer to the ipoctal struct corresponding to a struct dev. Previously we relied on a private list of devices. Signed-off-by:
-
Jens Taprogge authored
Signed-off-by:
-
Jens Taprogge authored
Now, all the interrupt related functions are next to each other. Signed-off-by:
-
Jens Taprogge authored
Rename __tpci_request_irq() to tpci_enable_irq() and __tpci_free_irq() to tpci_disable_irq(). Change their second argument, move them above tpci200_interrupt(), and use tpci_disable_irq() in the latter Signed-off-by:
-
Jens Taprogge authored
Minor cleanup. No functional changes. Signed-off-by:
-
Jens Taprogge authored
Previously the return value from tpci200_interrupt was not quite correct if a slot had caused an interrupt but no handler was instellalled: IRQ_NONE was returned. However in this case we react to the interrupt by disabling the IPack device interrupt. Basically there are two cases the code now distinguishes: - The tpci200 has raised an interrupt. We handle it and return IRQ_HANDLED. - Our device did not raise an interrupt. We return IRQ_NONE. Signed-off-by:
-
Jens Taprogge authored
Some of the device registers are accessed from both interrupt and non-interrupt context. To ensure proper read-modify-write modification of these registers we can not use the "global" tpci200 mutex. Instead a spin-lock is used. Signed-off-by:
-
Jens Taprogge authored
In tpci200_request_irq as well as tpci200_free_irq we set and unset the pointer to struct slot_irq. This pointer is accessed in tpci200_interrupt. To ensure that the pointer is not freed after it has been fetched in tpci200_interrupt() it is now protected through RCU. Signed-off-by:
-
Jens Taprogge authored
ipoctal_write_tty and ipoctal_write are merged. Signed-off-by:
-
Jens Taprogge authored
Split the IRQ service routing in TX part and RX part. Signed-off-by:
-
Jens Taprogge authored
This way interrupt handling becomes independent of the channel number. Signed-off-by:
-
Jens Taprogge authored
Each tty's driver_data is now pointing to the channel it is talking to. struct ipoctal_channel contains all the information the callbacks require to do their work. Signed-off-by:
-
Jens Taprogge authored
Signed-off-by:
-
Jens Taprogge authored
By moving everything channel related into a separate struct we will be able to clean up a lot of code. In the end tty->driver_data will no longer need to point to ipoctal but instead can point to the respective channel. Signed-off-by:
-
Jens Taprogge authored
This also removes a possible bug in the unhandles_ints part when slots[i] is not set. Signed-off-by:
-
Jens Taprogge authored
Use the __tpci200_{set,clear}_mask routines to access control register. Do not overwrite flags unrelated to interrupt handling. Signed-off-by: -
Jens Taprogge authored
Convert tpci200_set_clockrate and tpci200_interrupt. Signed-off-by:
-
Macpaul Lin authored
gdm_usb.* coding style clean up. Signed-off-by:
Macpaul Lin <macpaul@gmail.com> Cc: Paul Stewart <pstew@chromium.org> Cc: Ben Chan <benchan@chromium.org> Cc: Sage Ahn <syahn@gctsemi.com> Signed-off-by:
-
Aaro Koskinen authored
Add a sanity check for the video RAM size. It should fit into the PCI window. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Aaro Koskinen authored
It's possible to select video mode that exceeds the available video memory. This is potentially dangerous, fix by adding a check. The patch fixes system hangs seen occasionally when playing random videos with mplayer. Signed-off-by:
-
Dan Carpenter authored
We don't need these to be world writable or group writable. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Cotey <puff65537@bansheeslibrary.com> Signed-off-by:
-
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/ ) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/ ) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
-
Kevin McKinney authored
This patch create and initalizes a new device id of 0x172 as reported by Rinat Camalov <richman1000000d@gmail.com>. In addition, a comment is added to the potential invalid existing device id. Reported-by:
Rinat Camalov <richman1000000d@gmail.com> Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Signed-off-by:
-
H Hartley Sweeten authored
This macro relies on a local variable having a specific name. Also, remove the kfree in the detach. The comedi core handles the kfree of dev->private. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
H Hartley Sweeten authored
The the cfc_check_trigger_src helper for the "step 1" tests in pci9118_ai_cmdtest(). Signed-off-by:
-
H Hartley Sweeten authored
Move some of the functions to remove the need for the forward declarations. Signed-off-by:
-
H Hartley Sweeten authored
These debug messages should be removed from the final driver. Signed-off-by:
-
H Hartley Sweeten authored
These are just unnecessary whitespace. Signed-off-by:
-
H Hartley Sweeten authored
These macros enable a bunch of function trace messages. These should not be in the final driver. Signed-off-by:
-
H Hartley Sweeten authored
These macros rely on a local variable having a specific name. Signed-off-by:
-
H Hartley Sweeten authored
Use the helper function cfc_check_trigger_is_unique for the "step 2a" tests of pci171x_ai_cmdtest(). Signed-off-by:
-
H Hartley Sweeten authored
If a single source trigger passes "step 1" of the do_cmdtest function they are already unique. There is no need to recheck them. Signed-off-by:
-
H Hartley Sweeten authored
Use the helper function cfc_check_trigger_src for the "step 1" tests of pci171x_ai_cmdtest(). Signed-off-by:
-
H Hartley Sweeten authored
The legacy attach used the "dummy" boardinfo entry to allow matching a boardinfo to a pci card based on the "name" passed by the comedi core. This driver now uses the PCI auto config mechanism which always matches to the PCI vendor/device ids. Signed-off-by:
-
H Hartley Sweeten authored
The 'valid' variable in the private data is only used in the detach of the board to determine if the pci1710_reset() function can be called. That function only requires a valid dev->iobase to work. Use that for the check instead and remove the unneeded variable from the private data. Signed-off-by:
-
H Hartley Sweeten authored
Convert this PCI driver to use the comedi PCI auto config attach mechanism by adding an 'attach_pci' callback function. Since the driver does not require any external configuration options, and the legacy 'attach' callback is now optional, remove it. Signed-off-by:
-
H Hartley Sweeten authored
Remove the kernel message noise during the attach of the board. Use a simple/clean dev_info at the end of the attach. Signed-off-by:
-
- Sep 12, 2012
-
-
Daniel Cotey authored
Fix defines to comply with style guidelines Signed-off-by:
Daniel Cotey <puff65537@bansheeslibrary.com> Signed-off-by:
-
