Move check for paused channel to dwc_get_residue() and rename the latter
to dwc_get_residue_and_status().

This improves data integrity as residue and DMA channel status are set
in the same function under the same conditions.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230130151747.20704-1-andriy.shevchenko@linux.intel.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Resolves a panic that can occur on AMD systems, typically during host
shutdown, after the PTDMA driver had been exercised. The issue was
the pt_issue_pending() function is mistakenly assuming that there will
be at least one descriptor in the Submitted queue when the function
is called. However, it is possible that both the Submitted and Issued
queues could be empty, which could result in pt_cmd_callback() being
mistakenly called with a NULL pointer.
Ref: Bugzilla Bug 216856.

Fixes: 6fa7e0e8

 ("dmaengine: ptdma: fix concurrency issue with multiple dma transfer")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Link: https://lore.kernel.org/r/20230210075142.58253-1-epilmore@gigaio.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

If "vdesc" is NULL, it cannot be used with vd_to_axi_desc(). Leave
"bytes" unchanged at 0. Seen under GCC 13 with -Warray-bounds:

../drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c: In function 'dma_chan_tx_status':
../drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c:329:46: warning: array subscript 0 is outside array bounds of 'struct
virt_dma_desc[46116860184273879]' [-Warray-bounds=]
  329 |                 bytes = vd_to_axi_desc(vdesc)->length;
      |                                              ^~

Fixes: 8e55444d

 ("dmaengine: dw-axi-dmac: Support burst residue granularity")
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230127223623.never.507-kees@kernel.org


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Currently default read buffers that is allowed in a group is 0.
grpcfg will be configured to max read buffers that IDXD can support if
the group's allowed read buffers value is 0. But 0 is an invalid
read buffers value and user may get confused when seeing the invalid
initial value 0 through sysfs interface.

To show only valid allowed read buffers value and eliminate confusion,
directly initialize the allowed read buffers to IDXD's max read buffers.
User still can change the value through sysfs interface.

Suggested-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230127192855.966929-1-fenghua.yu@intel.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Commit b2cc5c46 ("dmaengine: sf-pdma: Add multithread support for a
DMA channel") changed sf_pdma_prep_dma_memcpy() to unconditionally
allocate a new sf_pdma_desc each time it is called.

The driver previously recycled descs, by checking the in_use flag, only
allocating additional descs if the existing one was in use. This logic
was removed in commit b2cc5c46 ("dmaengine: sf-pdma: Add multithread
support for a DMA channel"), but sf_pdma_free_desc() was not changed to
handle the new behaviour.

As a result, each time sf_pdma_prep_dma_memcpy() is called, the previous
descriptor is leaked, over time leading to memory starvation:

  unreferenced object 0xffffffe008447300 (size 192):
  comm "irq/39-mchp_dsc", pid 343, jiffies 4294906910 (age 981.200s)
  hex dump (first 32 bytes):
    00 00 00 ff 00 00 00 00 b8 c1 00 00 00 00 00 00  ................
    00 00 70 08 10 00 00 00 00 00 00 c0 00 00 00 00  ..p.............
  backtrace:
    [<00000000064a04f4>] kmemleak_alloc+0x1e/0x28
    [<00000000018927a7>] kmem_cache_alloc+0x11e/0x178
    [<000000002aea8d16>] sf_pdma_prep_dma_memcpy+0x40/0x112

Add the missing kfree() to sf_pdma_free_desc(), and remove the redundant
in_use flag.

Fixes: b2cc5c46

 ("dmaengine: sf-pdma: Add multithread support for a DMA channel")
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230120100623.3530634-1-shravan.chippa@microchip.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Use devm_add_action_or_reset() instead of devres_alloc() and
devres_add(), which works the same. This will simplify the
code. There is no functional changes.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230130112830.52353-1-andriy.shevchenko@linux.intel.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230130111141.59627-1-andriy.shevchenko@linux.intel.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Make an order in struct dma_device:
- added missing kernel doc descriptions
- put descriptions in the order of appearance in the code
- updated indentation where it makes sense

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230130110503.52250-1-andriy.shevchenko@linux.intel.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Cleanup examples:
 - use 4-space indentation (for cases when it is neither 4 not 2 space),
 - use lowercase hex,
 - drop unused node's label.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230124081117.31186-2-krzysztof.kozlowski@linaro.org


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Cleanup by removing unneeded quotes from refs and redundant blank lines.
No functional impact except adjusting to preferred coding style.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> # mediatek
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Hector Martin <marcan@marcan.st> # apple
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # Spear
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # Renesas
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> # Socionext
Link: https://lore.kernel.org/r/20230124081117.31186-1-krzysztof.kozlowski@linaro.org


Signed-off-by: Vinod Koul <vkoul@kernel.org>

The Xilinx DMA/Bridge Subsystem for PCIe (XDMA) provides up to 16 user
interrupt wires to user logic that generate interrupts to the host.
This patch adds APIs to enable/disable user logic interrupt for a given
interrupt wire index.

Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Sonal Santan <sonal.santan@amd.com>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Brian Xu <brian.xu@amd.com>
Tested-by: Martin Tuma <tumic@gpxsee.org>
Link: https://lore.kernel.org/r/1674145926-29449-3-git-send-email-lizhi.hou@amd.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Add driver to enable PCIe board which uses XDMA (the DMA/Bridge Subsystem
for PCI Express). For example, Xilinx Alveo PCIe devices.
    https://www.xilinx.com/products/boards-and-kits/alveo.html

The XDMA engine support up to 4 Host to Card (H2C) and 4 Card to Host (C2H)
channels. Memory transfers are specified on a per-channel basis in
descriptor linked lists, which the DMA fetches from host memory and
processes. Events such as descriptor completion and errors are signaled
using interrupts. The hardware detail is provided by
    https://docs.xilinx.com/r/en-US/pg195-pcie-dma/Introduction



This driver implements dmaengine APIs.
    - probe the available DMA channels
    - use dma_slave_map for channel lookup
    - use virtual channel to manage dmaengine tx descriptors
    - implement device_prep_slave_sg callback to handle host scatter gather
      list
    - implement device_config to config device address for DMA transfer

Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Sonal Santan <sonal.santan@amd.com>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Brian Xu <brian.xu@amd.com>
Tested-by: Martin Tuma <tumic@gpxsee.org>
Link: https://lore.kernel.org/r/1674145926-29449-2-git-send-email-lizhi.hou@amd.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

platform_get_resource() and devm_ioremap_resource() are wrapped up in the
devm_platform_ioremap_resource() helper. Use the helper and get rid of the
local variable for struct resource *. We now have a function call less.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221110152528.7821-1-tudor.ambarus@microchip.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Remove empty line.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221117131547.293044-4-claudiu.beznea@microchip.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Add runtime PM support which involves disabling/enabling controller's
clocks on runtime PM suspend/resume ops. The runtime suspend/resume is
done based on the work submitted to the controller: runtime resume is
happening on at_xdmac_start_xfer() and runtime suspend on
at_xdmac_tasklet().

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221117131547.293044-2-claudiu.beznea@microchip.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Align properly function members.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221117131547.293044-3-claudiu.beznea@microchip.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212061714501297954@zte.com.cn


Signed-off-by: Vinod Koul <vkoul@kernel.org>

The sun6i DMA engine supports segment sizes up to 2^25-1 bytes. This is
explicitly stated in newer SoC documentation (H6, D1), and it is implied
in older documentation by the 25-bit width of the "bytes left in the
current segment" register field.

Exposing the real segment size limit (instead of the 64k default)
reduces the number of SG list segments needed for a transaction.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230101193605.50285-1-samuel@sholland.org


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Drop the non-fatal probe deferral log for getting MSI domain.
This makes the kernel log clean and we do not get recurring logs
stating: "Failed to get MSI domain".

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20230117051855.29644-1-j-choudhary@ti.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

The Qualcomm SM8550 uses GPI DMA for its GENI interface. Add a compatible
string for it in the documentation by using the SM6350 as fallback.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-gpi-v1-0-33b28a227c5d@linaro.org


Signed-off-by: Vinod Koul <vkoul@kernel.org>

The hdmi script already supported in sdma firmware. So add support hdmi
in sdma driver.

The design of hdmi script is different from common script such as sai.
There is no need to config buffer descriptor for HDMI. The cyclic
capability is achieved by the hdmi script. The slave config is so simple,
only config src_addr, dts_addr and direction DMA_TRANS_NONE.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20221115093823.2879128-3-joy.zou@nxp.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Convert the i.MX SDMA binding to DT schema format using json-schema.

The compatibles fsl,imx31-to1-sdma, fsl,imx31-to2-sdma, fsl,imx35-to1-sdma
and fsl,imx35-to2-sdma are not used. So need to delete it. The compatibles
fsl,imx50-sdma, fsl,imx6sll-sdma and fsl,imx6sl-sdma are added. The
original binding don't list all compatible used.

In addition, add new peripheral types HDMI Audio.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221115093823.2879128-2-joy.zou@nxp.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

The HiSilicon DMA Engine is only present on HiSilicon SoCs.  Hence add a
dependency on ARCH_HISI, to prevent asking the user about this driver
when configuring a kernel without HiSilicon SoC support.

Fixes: e9f08b65

 ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/363a1816d36cd3cf604d88ec90f97c75f604de64.1669044190.git.geert+renesas@glider.be


Signed-off-by: Vinod Koul <vkoul@kernel.org>

On DSA/IAX 1.0, TC-A and TC-B in GRPCFG are set as 1 to have best
performance and cannot be changed through sysfs knobs unless override
option is given.

The same values should be set on DSA 2.0 as well.

Fixes: ea7c8f59 ("dmaengine: idxd: restore traffic class defaults after wq reset")
Fixes: ade8a86b

 ("dmaengine: idxd: Set defaults for GRPCFG traffic class")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221209172141.562648-1-fenghua.yu@intel.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

The function set_completion_address is defined in the dma.c file, but not
called elsewhere, so remove this unused function.

drivers/dma/idxd/dma.c:66:20: warning: unused function 'set_completion_address'.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3416


Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221212033514.5831-1-jiapeng.chong@linux.alibaba.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

BCDMA CSI RX present on AM62Ax SoC is a dedicated DMA for servicing
Camera Serial Interface (CSI) IP. Add support for the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221213164304.1126945-6-vigneshr@ti.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

AM62A SoC has a BCDMA and PKTDMA as systems DMAs for service various
peripherals similar to AM64 SoC. Add support for the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221213164304.1126945-5-vigneshr@ti.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Add PSIL and PDMA data for AM62Ax SoC.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221213164304.1126945-4-vigneshr@ti.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reusing loop iterator fails if BCHAN is not present as iterator is
uninitialized

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221213164304.1126945-3-vigneshr@ti.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

AM62A SoC has a dedicated BCDMA that serves Camera Serial Interface
(CSI) IP. Add new compatible for the same. Unlike system
BCDMA, this instance only has RX DMA channels and lack TX or block copy
channel. Thus make those properties optional. Additionally CSI RX has
independent power domain, add the binding for the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221213164304.1126945-2-vigneshr@ti.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Add compatible for gpi on QDU1000 and QRU1000 SoCs.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221216231513.25085-1-quic_molvera@quicinc.com


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Convert the MXS DMA binding to DT schema format using json-schema.

Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c
in Linux kernel does not use it, the property contains duplicate array entries
in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get
rid of that optional property altogether.

Update example node names to be standard dma-controller@ ,
add global interrupt-parent property into example.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221219093713.328776-1-marex@denx.de


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Document compatibility for this GPI DMA controller on SM6125.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
[Marijn: Move compatible to the list with qcom,sdm845-gpi-dma]
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221222194600.139854-2-marijn.suijten@somainline.org


Signed-off-by: Vinod Koul <vkoul@kernel.org>

Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/


Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi fix from Mark Brown:
 "One driver specific change here which handles the case where a SPI
  device for some reason tries to change the bus speed during a message
  on fsl_spi hardware, this should be very unusual"

* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl_spi: Don't change speed while chipselect is active

Merge tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two core fixes here, one for a long standing race which some Qualcomm
  systems have started triggering with their UFS driver and another
  fixing a problem with supply lookup introduced by the fixes for devm
  related use after free issues that were introduced in this merge
  window"

* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: fix deadlock on regulator enable
  regulator: core: Fix resolve supply lookup issue

Pull coccicheck update from Julia Lawall:
 "Modernize use of grep in coccicheck:

  Use 'grep -E' instead of 'egrep'"

* tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccicheck: use "grep -E" instead of "egrep"

Pull kernel hardening fixes from Kees Cook:

 - Fix CFI failure with KASAN (Sami Tolvanen)

 - Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko)

 - Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan
   Chancellor)

 - Ignore "contents" argument in LoadPin's LSM hook handling

 - Fix paste-o in /sys/kernel/warn_count API docs

 - Use READ_ONCE() consistently for oops/warn limit reading

* tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  cfi: Fix CFI failure with KASAN
  exit: Use READ_ONCE() for all oops/warn limit reads
  security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
  lkdtm: cfi: Make PAC test work with GCC 7 and 8
  docs: Fix path paste-o for /sys/kernel/warn_count
  LoadPin: Ignore the "contents" argument of the LSM hooks

Pull pstore fixes from Kees Cook:

 - Switch pmsg_lock to an rt_mutex to avoid priority inversion (John
   Stultz)

 - Correctly assign mem_type property (Luca Stefani)

* tag 'pstore-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Properly assign mem_type property
  pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
  pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion