- Sep 24, 2017
-
-
Ricardo Ribalda authored
max_width and max_height are swap with step_width and step_height. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Markus Elfring authored
- Delete an error message for a failed memory allocation in init_vpbe_layer(); - Replace the specification of data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention; - media: DaVinci-VPBE-Display: Improve a size determination in two functions - Adjust 12 checks for null pointers Those issues were pointed by checkpatch.pl and Coccinelle. [mchehab@s-opensource.com: fold three cleanup patches into one] Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
- Sep 23, 2017
-
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. ERROR: do not use assignment in if condition Thus fix the affected source code place. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. ERROR: do not use assignment in if condition Thus fix the affected source code places. Signed-off-by:
-
Colin Ian King authored
Don't populate the array buf on the stack, instead make it static. Makes the object code smaller by over 240 bytes: Before: text data bss dec hex filename 21689 22992 416 45097 b029 cx23885-cards.o After: text data bss dec hex filename 21348 23088 416 44852 af34 cx23885-cards.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the arrays res_x and resy_y on the stack, instead make them static const. Makes the object code smaller by over 160 bytes: Before: text data bss dec hex filename 10509 2800 64 13373 343d ov9640.o After: text data bss dec hex filename 10184 2960 64 13208 3398 ov9640.o Signed-off-by:
-
Colin Ian King authored
The error handling paths all end up with retval being non-zero, so the check for retval being zero is always false and hence is redundant. Remove it. Detected by CoverityScan CID#1309479 ("Logically dead code") Signed-off-by: -
Colin Ian King authored
Don't populate the array syds on the stack, instead make it static const. Makes the object code smaller by over 280 bytes: Before: text data bss dec hex filename 81451 12784 704 94939 172db cx25840-core.o text data bss dec hex filename 81070 12880 704 94654 171be cx25840-core.o Signed-off-by:
-
Thomas Meyer authored
Use ARRAY_SIZE macro, rather than explicitly coding some variant of it yourself. Found with: find -type f -name "*.c" -o -name "*.h" | xargs perl -p -i -e 's/\bsizeof\s*\(\s*(\w+)\s*\)\s*\ /\s*sizeof\s*\(\s*\1\s*\[\s*0\s*\]\s*\) /ARRAY_SIZE(\1)/g' and manual check/verification. Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Daniel Scheller authored
Fixes one sparse warning: mxl5xx.c:46:1: warning: symbol 'mxllist' was not declared. Should it be static? Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
-
Colin Ian King authored
Don't populate the array rc_nec_tab on the stack, instead make it static const. Makes the object code smaller by over 620 bytes: Before: text data bss dec hex filename 49511 17040 64 66615 10437 rtl28xxu.o After: text data bss dec hex filename 48825 17104 64 65993 101c9 rtl28xxu.o Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Done using Coccinelle. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct i2c_client s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct i2c_client s; Signed-off-by: -
Markus Elfring authored
* Return directly after a call of the function "kzalloc" failed at the beginning. * Move a bit of exception handling code into an if branch. * Delete jump targets which became unnecessary with this refactoring. Signed-off-by:
-
Markus Elfring authored
The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix the affected source code places. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. [mchehab@s-opensoure.com: merge similar patches into one] Signed-off-by:
-
Markus Elfring authored
The variables will be set to an appropriate value before usage. Thus omit the explicit initialisation at the beginning. [mchehab@s-opensource.com: fold similar patches into one] Signed-off-by:
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: fold several similar patches into one] Signed-off-by:
-
Hans Verkuil authored
Add CEC support for the tc358743 HDMI-CSI bridge. Signed-off-by:
-
Hans Verkuil authored
Add the missing CEC register defines. Signed-off-by:
-
Hans Verkuil authored
Add an entry for the CEC GPIO driver. Signed-off-by:
-
Hans Verkuil authored
Add a simple HDMI CEC GPIO driver that sits on top of the cec-pin framework. While I have heard of SoCs that use the GPIO pin for CEC (apparently an early RockChip SoC used that), the main use-case of this driver is to function as a debugging tool. By connecting the CEC line to a GPIO pin on a Raspberry Pi 3 for example it turns it into a CEC debugger and protocol analyzer. With 'cec-ctl --monitor-pin' the CEC traffic can be analyzed. But of course it can also be used with any hardware project where the HDMI CEC line is hooked up to a pull-up gpio line. In addition this has (optional) support for tracing HPD changes if the HPD is connected to a GPIO. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Hans Verkuil authored
Document the bindings for the cec-gpio module for hardware where the CEC line and optionally the HPD line are connected to GPIO lines. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Hans Verkuil authored
Document these new CEC events. Signed-off-by:
-
Hans Verkuil authored
Add support for two new low-level events: PIN_HPD_LOW and PIN_HPD_HIGH. This is specifically meant for use with the upcoming cec-gpio driver and makes it possible to trace when the HPD pin changes. Some HDMI sinks do strange things with the HPD and this makes it easy to debug this. Note that this also moves the initialization of a devnode mutex and list to the allocate_adapter function: if the HPD is high, then as soon as the HPD interrupt is created an interrupt occurs and cec_queue_pin_hpd_event() is called which requires that the devnode mutex and list are initialized. Signed-off-by:
-
Hans Verkuil authored
CEC_TX_STATUS_ERROR can be used if the HW cannot tell LOST_ARB and LOW_DRIVE apart, or when some other error occurs. It is not a replacement for NACK. So the hardware must be able to tell the difference between OK, NACK and 'something else'. Clarify the documentation (both public and kernel API) on this point. Also fix two small typos (this messages -> this message). Signed-off-by:
-
Hans Verkuil authored
The documentation talked about INITIAL_VALUE when the actual define is INITIAL_STATE. Fix this. Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
-
Hans Verkuil authored
Use ktime_to_ns/ns_to_ktime. This makes it possible to work with older kernels and the media_build compatibility system. For the mainline kernel these functions are NOPs. Signed-off-by:
-
Jose Abreu authored
Running CEC 1.4 compliance test we get the following error on test 11.1.6.2: "ERROR: The DUT did not broadcast a <Report Physical Address> message to the unregistered device." Fix this by letting GIVE_PHYSICAL_ADDR message respond to unregistered device. Also, GIVE_DEVICE_VENDOR_ID and GIVE_FEATURES fall in the same category so, respond also to these messages. With this fix we pass CEC 1.4 official compliance. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by:
-
Hans Verkuil authored
The s5p-cec driver returned CEC_TX_STATUS_ERROR for the NACK condition. Some digging into the datasheet uncovered the S5P_CEC_TX_STAT1 register where bit 0 indicates if the transmit was nacked or not. Use this to return the correct CEC_TX_STATUS_NACK status to userspace. This was the only driver that couldn't tell a NACK from another error, and that was very unusual. And a potential problem for applications as well. Tested with my Odroid-U3. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by:
-
Laurent Pinchart authored
The ret variable can be returned uninitialized in the imx_media_create_pad_vdev_lists() function is imxmd->num_vdevs is zero. Fix it. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Colin Ian King authored
The function vfe_set_selection is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'vfe_set_selection' was not declared. Should it be static? Signed-off-by:
Todor Tomov <todor.tomov@linaro.org> Signed-off-by:
-
Stanimir Varbanov authored
Add missing init_list_head for the registered buffer list. Absence of the init could lead to a unhandled kernel paging request as below, when streamon/streamoff are called in row. [338046.571321] Unable to handle kernel paging request at virtual address fffffffffffffe00 [338046.574849] pgd = ffff800034820000 [338046.582381] [fffffffffffffe00] *pgd=00000000b60f5003[338046.582545] , *pud=00000000b1f31003 , *pmd=0000000000000000[338046.592082] [338046.597754] Internal error: Oops: 96000004 [#1] PREEMPT SMP [338046.601671] Modules linked in: venus_enc venus_dec venus_core usb_f_ecm g_ether usb_f_rndis u_ether libcomposite ipt_MASQUERADE nf_nat_masquerade_ipv4 arc4 wcn36xx mac80211 btqcomsmd btqca iptable_nat nf_co] [338046.662408] CPU: 0 PID: 5433 Comm: irq/160-venus Tainted: G W 4.9.39+ #232 [338046.668024] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [338046.675268] task: ffff80003541cb00 task.stack: ffff800026e20000 [338046.682097] PC is at venus_helper_release_buf_ref+0x28/0x88 [venus_core] [338046.688282] LR is at vdec_event_notify+0xe8/0x150 [venus_dec] [338046.695029] pc : [<ffff000000af6c48>] lr : [<ffff000000a6fc60>] pstate: a0000145 [338046.701256] sp : ffff800026e23bc0 [338046.708494] x29: ffff800026e23bc0 x28: 0000000000000000 [338046.718853] x27: ffff000000afd4f8 x26: ffff800031faa700 [338046.729253] x25: ffff000000afd790 x24: ffff800031faa618 [338046.739664] x23: ffff800003e18138 x22: ffff800002fc9810 [338046.750109] x21: ffff800026e23c28 x20: 0000000000000001 [338046.760592] x19: ffff80002a13b800 x18: 0000000000000010 [338046.771099] x17: 0000ffffa3d01600 x16: ffff000008100428 [338046.781654] x15: 0000000000000006 x14: ffff000089045ba7 [338046.792250] x13: ffff000009045bb6 x12: 00000000004f37c8 [338046.802894] x11: 0000000000267211 x10: 0000000000000000 [338046.813574] x9 : 0000000000032000 x8 : 00000000dc400000 [338046.824274] x7 : 0000000000000000 x6 : ffff800031faa728 [338046.835005] x5 : ffff80002a13b850 x4 : 0000000000000000 [338046.845793] x3 : fffffffffffffdf8 x2 : 0000000000000000 [338046.856602] x1 : 0000000000000003 x0 : ffff80002a13b800 Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Sean Young authored
Since commit 29d2fef8 ("usb: catch attempts to submit urbs with a vmalloc'd transfer buffer"), the AverMedia AverTV DVB-T USB 2.0 (a800) fails to probe. Cc: stable@vger.kernel.org Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
- Sep 06, 2017
-
-
Arnd Bergmann authored
We get a link error when V4L2_FLASH_LED_CLASS=m and AS3645A is built-in: drivers/leds/leds-as3645a.o: In function `as3645a_v4l2_setup': leds-as3645a.c:(.text+0x258): undefined reference to `v4l2_flash_init' leds-as3645a.c:(.text+0x284): undefined reference to `v4l2_flash_indicator_init' leds-as3645a.c:(.text+0x2a4): undefined reference to `v4l2_flash_release' drivers/leds/leds-as3645a.o: In function `as3645a_remove': leds-as3645a.c:(.text+0x784): undefined reference to `v4l2_flash_release' This adds the same Kconfig dependency that the other V4L2 flash drivers in drivers/leds use, to avoid that broken configuration. Fixes: a56ba8fb ("media: leds: as3645a: Add LED flash class driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
- Sep 05, 2017
-
-
Mauro Carvalho Chehab authored
Those two ioctls were never used within the Kernel. Still, there used to have compat32 code there (and an if #0 block at the core). Get rid of them. Fixes: 286fe1ca ("media: dmx.h: get rid of DMX_GET_CAPS") Fixes: 13adefbe ("media: dmx.h: get rid of DMX_SET_SOURCE") Signed-off-by:
-
Rob Herring authored
This reverts commit d2180e0c. The commit was flawed in that if the device_node pointers are different, then in fact a different device is present and the device node could be different in ways other than full_name. As Frank Rowand explained: "When an overlay (1) is removed, all uses and references to the nodes and properties in that overlay are no longer valid. Any driver that uses any information from the overlay _must_ stop using any data from the overlay. Any driver that is bound to a new node in the overlay _must_ unbind. Any driver that became bound to a pre-existing node that was modified by the overlay (became bound after the overlay was applied) _must_ adjust itself to account for any changes to that node when the overlay is removed. One way to do this is to unbind when notified that the overlay is about to be removed, then to re-bind after the overlay is completely removed. If an overlay (2) is subsequently applied, a node with the same full_name as from overlay (1) may exist. There is no guarantee that overlay (1) and overlay (2) are the same overlay, even if that node has the same full_name in both cases." Also, there's not sufficient overlay support in mainline to actually remove and re-apply an overlay to hit this condition as overlays can only be applied from in kernel APIs. Fixes: d2180e0c ("[media] v4l: async: make v4l2 coexist with devicetree nodes in a dt overlay") Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by:
Javi Merino <javi.merino@kernel.org> Signed-off-by:
-
Sergei A. Trusov authored
The calloc function returns either a null pointer or a pointer to the allocated space. Add the second case that is missed. Fixes: da22013f ("atomisp: remove indirection from sh_css_malloc") Signed-off-by:
Sergei A. Trusov <sergei.a.trusov@ya.ru> Signed-off-by:
-
Sean Young authored
This reverts commit 5be2b76a. Only when the lirc device is freed, should we drop our reference to rc_dev, else we the rc_dev is freed to early. If userspace has a file descriptor open during unplug, it goes bang. ================================================================== BUG: KASAN: use-after-free in __lock_acquire+0x7bb/0x1e10 Read of size 8 at addr ffff8801d7d61ed0 by task ir-rec/2609 -snip- mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 rc_close.part.6+0x20/0x60 [rc_core] rc_close+0x13/0x20 [rc_core] lirc_dev_fop_close+0x62/0xd0 [lirc_dev] __fput+0x236/0x410 ? fput+0xb0/0xb0 ? do_raw_spin_trylock+0x110/0x110 ? set_rq_offline.part.70+0xa0/0xa0 ____fput+0xe/0x10 task_work_run+0x116/0x180 ? task_work_cancel+0x170/0x170 ? _raw_spin_unlock+0x27/0x40 ? switch_task_namespaces+0x5f/0x90 do_exit+0x68b/0xe80 Cc: stable@vger.kernel.org # For Kernel 4.13 Fixes: 5be2b76a ("[media] lirc_dev: remove superfluous get/put_device() calls") Signed-off-by:
-
Mauro Carvalho Chehab authored
Avoid this warning: /devel/v4l/docs/Documentation/media/v4l-drivers/qcom_camss.rst:: WARNING: document isn't included in any toctree Signed-off-by:
-
