- Jan 30, 2020
-
-
Colin Ian King authored
There is a spelling mistake in a pm8001_printk message. Fix it. Link: https://lore.kernel.org/r/20200123005706.2834281-1-colin.king@canonical.com Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bean Huo authored
Pedro has left Synopsys and his email address doesn't work anymore. Everytime after sending email I will receive his undeliverable email. Remove his email address from MAINTAINERS. Signed-off-by:
Bean Huo <huobean@gmail.com> Signed-off-by:
-
Hannes Reinecke authored
Streamline resume workflow by using the same functions for enabling MSIx interrupts as used during initialisation. Without it the driver might crash during resume with: WARNING: CPU: 2 PID: 4306 at ../drivers/pci/msi.c:1303 pci_irq_get_affinity+0x3b/0x90 Link: https://lore.kernel.org/r/20200113132609.69536-1-hare@suse.de Signed-off-by:
Hannes Reinecke <hare@suse.de> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Arun Easi authored
On certain cases when response length is less than 32, NVME response data is supplied inline in IOCB. This is indicated by some combination of state flags. There was an instance when a high, and incorrect, response length was indicated causing driver to overrun buffers. Fix this by checking and limiting the response payload length. Fixes: 7401bc18 ("scsi: qla2xxx: Add FC-NVMe command handling") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200124045014.23554-1-hmadhani@marvell.com Signed-off-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
- Jan 21, 2020
-
-
John Garry authored
In future we will want to use hisi_sas_cq.pci_irq_mask for non-pci interrupt masks, so rename to be more general. Link: https://lore.kernel.org/r/1579522957-4393-7-git-send-email-john.garry@huawei.com Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
Add prints to inform the user of enabled features. Link: https://lore.kernel.org/r/1579522957-4393-6-git-send-email-john.garry@huawei.com Signed-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
The trigger_dump file is only used to manually trigger the dump, and did not provide a read callback function for it, so its file permission setting to 600 is wrong,and should be changed to 200. Link: https://lore.kernel.org/r/1579522957-4393-5-git-send-email-john.garry@huawei.com Signed-off-by:
-
Luo Jiaxing authored
We use magic number as offset and mask when handle channel interrupt, so use macro to replace it. Link: https://lore.kernel.org/r/1579522957-4393-4-git-send-email-john.garry@huawei.com Signed-off-by:
-
Xiang Chen authored
After changing tasklet to workqueue or threaded irq, some critical resources are only used on threads (not in interrupt or bottom half of interrupt), so replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock to protect those critical resources. Link: https://lore.kernel.org/r/1579522957-4393-3-git-send-email-john.garry@huawei.com Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Xiang Chen authored
Currently IRQ_EFFECTIVE_AFF_MASK is enabled for ARM_GIC and ARM_GIC3, so it only allows a single target CPU in the affinity mask to process interrupts and also interrupt thread, and the performance of using threaded irq is almost the same as tasklet. But if the config is not enabled, the interrupt thread will be allowed all the CPUs in the affinity mask. At that situation it improves the performance (about 20%). Note: IRQ_EFFECTIVE_AFF_MASK is configured differently for different architecture chip, and it seems to be better to make it be configured easily. Link: https://lore.kernel.org/r/1579522957-4393-2-git-send-email-john.garry@huawei.com Signed-off-by:
-
Bean Huo authored
According to Jedec standard UFS 3.0 and UFS 2.1 Spec, Maximum number of logical units supported by the UFS device is indicated by parameter bMaxNumberLU in Geometry Descriptor. This patch is to delete current hard code macro definition of UFS_UPIU_MAX_GENERAL_LUN, and switch to use device indicated number instead. Link: https://lore.kernel.org/r/20200120130820.1737-9-huobean@gmail.com Reviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Bean Huo authored
Add one new parameter max_lu_supported in struct ufs_dev_info, which will be used to express exactly how many general LUs being supported by UFS device, and initialize it during booting stage. This patch also adds a new function ufshcd_device_geo_params_init() for initialization of UFS device geometry descriptor related parameters. Link: https://lore.kernel.org/r/20200120130820.1737-8-huobean@gmail.com Reviewed-by:
-
Bean Huo authored
Without variable is_init_prefetch, the current logic can guarantee ufshcd_init_icc_levels() will execute only once, delete it now. Link: https://lore.kernel.org/r/20200120130820.1737-7-huobean@gmail.com Reviewed-by:
-
Bean Huo authored
Delete ufshcd_read_power_desc() and ufshcd_read_device_desc(), directly inline ufshcd_read_desc() into its callers. Link: https://lore.kernel.org/r/20200120130820.1737-6-huobean@gmail.com Reviewed-by:
-
Bean Huo authored
ufshcd_get_max_pwr_mode() only need to be called once while booting, take it out from ufshcd_probe_hba() and inline into ufshcd_device_params_init(). Link: https://lore.kernel.org/r/20200120130820.1737-5-huobean@gmail.com Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
-
Bean Huo authored
This patch has two major non-functionality changes: 1. Take scanning host if-statement out from ufshcd_probe_hba(), and move into a new added function ufshcd_add_lus(). In this new function ufshcd_add_lus(), the main functionalitis include: ICC initialization, add well-known LUs, devfreq initialization, UFS bsg probe and scsi host scan. The reason for this change is that these functionalities only being called during booting stage flow ufshcd_init()->ufshcd_async_scan(). In the processes of error handling and power management ufshcd_suspend(), ufshcd_resume(), ufshcd_probe_hba() being called, but these functionalitis above metioned are not hit. 2. Move context of initialization of parameters associated with the UFS device to a new added function ufshcd_device_params_init(). The reason of this change is that all of these parameters are used by driver, but only need to be initialized once when booting. Combine them into an integral function, make them easier maintain. Link: https://lore.kernel.org/r/20200120130820.1737-4-huobean@gmail.com Reviewed-by:
-
Bean Huo authored
In consideration of UFS host driver uses parameters of struct ufs_dev_desc, move its parameters to struct ufs_dev_info, delete struct ufs_dev_desc. Link: https://lore.kernel.org/r/20200120130820.1737-3-huobean@gmail.com Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Bean Huo authored
A non-zero error value likely being returned by ufshcd_scsi_add_wlus() in case of failure of adding the WLs, but ufshcd_probe_hba() doesn't use this value, and doesn't report this failure to upper caller. This patch is to fix this issue. Fixes: 2a8fa600 ("ufs: manually add well known logical units") Link: https://lore.kernel.org/r/20200120130820.1737-2-huobean@gmail.com Reviewed-by:
-
Stanley Chu authored
In MediaTek Chipsets, UniPro link and ufshci can enter proprietary low-power mode while link is in hibern8 state. Link: https://lore.kernel.org/r/20200117035108.19699-4-stanley.chu@mediatek.com Reviewed-by:
-
Stanley Chu authored
Export below functions for vendor usage: int ufshcd_hba_enable(struct ufs_hba *hba); int ufshcd_make_hba_operational(struct ufs_hba *hba); int ufshcd_uic_hibern8_exit(struct ufs_hba *hba); Link: https://lore.kernel.org/r/20200117035108.19699-3-stanley.chu@mediatek.com Reviewed-by:
-
Stanley Chu authored
Add dbg_register_dump variant vendor implementation in MediaTek UFS driver. Link: https://lore.kernel.org/r/20200117035108.19699-2-stanley.chu@mediatek.com Reviewed-by:
-
Bart Van Assche authored
This patch fixes the following Coverity complaint: FORWARD_NULL qla_init.c: 5275 in qla2x00_configure_local_loop() 5269 5270 if (fcport->scan_state == QLA_FCPORT_FOUND) 5271 qla24xx_fcport_handle_login(vha, fcport); 5272 } 5273 5274 cleanup_allocation: >>> CID 353340: (FORWARD_NULL) >>> Passing null pointer "new_fcport" to "qla2x00_free_fcport", which dereferences it. 5275 qla2x00_free_fcport(new_fcport); 5276 5277 if (rval != QLA_SUCCESS) { 5278 ql_dbg(ql_dbg_disc, vha, 0x2098, 5279 "Configure local loop error exit: rval=%x.\n", rval); 5280 } qla_init.c: 5275 in qla2x00_configure_local_loop() 5269 5270 if (fcport->scan_state == QLA_FCPORT_FOUND) 5271 qla24xx_fcport_handle_login(vha, fcport); 5272 } 5273 5274 cleanup_allocation: >>> CID 353340: (FORWARD_NULL) >>> Passing null pointer "new_fcport" to "qla2x00_free_fcport", which dereferences it. 5275 qla2x00_free_fcport(new_fcport); 5276 5277 if (rval != QLA_SUCCESS) { 5278 ql_dbg(ql_dbg_disc, vha, 0x2098, 5279 "Configure local loop error exit: rval=%x.\n", rval); 5280 } Fixes: 3dae2205 ("scsi: qla2xxx: Use common routine to free fcport struct") Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Link: https://lore.kernel.org/r/20200118042056.32232-1-bvanassche@acm.org Signed-off-by:Daniel Wagner <dwagner@suse.de> Signed-off-by:
-
Thomas Bogendoerfer authored
Use #ifdef QLA_64BIT_PTR to check if 64bit support is enabled. This fixes ("scsi: qla1280: Fix dma firmware download, if dma address is 64bit"). Link: https://lore.kernel.org/r/20200117115628.13219-1-tbogendoerfer@suse.de Signed-off-by:Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
-
- Jan 16, 2020
-
-
Anand Lodnoor authored
Link: https://lore.kernel.org/r/1579000882-20246-12-git-send-email-anand.lodnoor@broadcom.com Signed-off-by:
Anand Lodnoor <anand.lodnoor@broadcom.com> Signed-off-by:
-
Anand Lodnoor authored
Remove usage of device_busy counter from driver. Instead of device_busy counter now driver uses 'nr_active' counter of request_queue to get the number of inflight request for a LUN. Link: https://lore.kernel.org/r/1579000882-20246-11-git-send-email-anand.lodnoor@broadcom.com Link : https://patchwork.kernel.org/patch/11249297/ Signed-off-by:
Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by:
-
Anand Lodnoor authored
IOCTLs causing firmware fault may end up in failed controller resets and finally killing the adapter. This patch fixes this problem as stated below: In OCR sequence, driver will attempt refiring pended IOCTLs upto two times. If first two attempts fail, then in third attempt driver will return pended IOCTLs with EBUSY status to application. These changes are done to ensure if any of pended IOCTLs is causing firmware fault and resulting into OCR failure, then in last attempt of OCR driver will refrain firing it to firmware and saving adapter from being killed due to faulty IOCTL. Link: https://lore.kernel.org/r/1579000882-20246-10-git-send-email-anand.lodnoor@broadcom.com Signed-off-by:
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by:
-
Anand Lodnoor authored
Driver initiates OCR if a DCMD command times out. But there is a deadlock if the driver attempts to invoke another OCR before the mutex lock (reset_mutex) is released from the previous session of OCR. This patch takes care of the above scenario using new flag MEGASAS_FUSION_OCR_NOT_POSSIBLE to indicate if OCR is possible. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1579000882-20246-9-git-send-email-anand.lodnoor@broadcom.com Signed-off-by:
-
Anand Lodnoor authored
DCMD_INIT is introduced to indicate the initial DCMD status, which was earlier set to MFI status. DCMD_BUSY indicates the resource is busy or locked. Link: https://lore.kernel.org/r/1579000882-20246-8-git-send-email-anand.lodnoor@broadcom.com Signed-off-by:
-
Anand Lodnoor authored
After issuing a adapter reset, driver blindly used to set adprecovery flag to OPERATIONAL state. Add a check to see if the FW is operational before setting the flag and marking reset adapter successful. Link: https://lore.kernel.org/r/1579000882-20246-7-git-send-email-anand.lodnoor@broadcom.com Signed-off-by:
-
Anand Lodnoor authored
At the time of firmware initialization, if JBOD map or RAID map is not available, driver can function without these features in a limited functionality mode. Link: https://lore.kernel.org/r/1579000882-20246-6-git-send-email-anand.lodnoor@broadcom.com Signed-off-by:
-
Anand Lodnoor authored
Link: https://lore.kernel.org/r/1579000882-20246-5-git-send-email-anand.lodnoor@broadcom.com Signed-off-by:
-
Anand Lodnoor authored
Ideally, optimal queue depth will be provided by firmware. The driver defines will be used as a fallback mechanism in case the FW assisted QD is not supported. The driver defined values provide optimal queue depth for most of the drives and the workloads, as is learned from the firmware assisted QD results. Link: https://lore.kernel.org/r/1579000882-20246-4-git-send-email-anand.lodnoor@broadcom.com Signed-off-by:
-
Anand Lodnoor authored
Disable WRITE_SAME (no_write_same) for Virtual Disks only. For System PDs and EPDs (Enhanced PDs), WRITE_SAME need not be disabled by default. Link: https://lore.kernel.org/r/1579000882-20246-3-git-send-email-anand.lodnoor@broadcom.com Signed-off-by:
-
Anand Lodnoor authored
After device resume we expect the firmware to be in READY state. Transition to READY might fail due to unhandled exceptions, such as an internal error or a hardware failure. Retry initiating chip reset and wait for the controller to come to ready state. Link: https://lore.kernel.org/r/1579000882-20246-2-git-send-email-anand.lodnoor@broadcom.com Signed-off-by:
-
Thomas Bogendoerfer authored
Do firmware download with 64bit LOAD_RAM command, if driver is using 64bit addressing. Link: https://lore.kernel.org/r/20200114160936.1517-1-tbogendoerfer@suse.de Signed-off-by:
-
Gabriel Krisman Bertazi authored
If the transport cannot be registered, the session/connection creation needs to be failed early to let the initiator know. Otherwise, the system will have an outstanding connection that cannot be used nor removed by open-iscsi. The result is similar to the error below, triggered by injecting a failure in the transport's registration path. openiscsi reports success: root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -l Logging in to [iface: default, target: iqn:lun1, portal: 127.0.0.1,3260] Login to [iface: default, target: iqn:lun1, portal:127.0.0.1,3260] successful. But cannot remove the session afterwards, since the kernel is in an inconsistent state. root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -u iscsiadm: No matching sessions found Link: https://lore.kernel.org/r/20200106185817.640331-4-krisman@collabora.com Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
The transport registration may fail. Make sure the errors are propagated to the callers. Link: https://lore.kernel.org/r/20200106185817.640331-3-krisman@collabora.com Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Gabriel Krisman Bertazi authored
attribute_container_device_trigger invokes callbacks that may fail for one or more classdevs, for instance, the transport_add_class_device callback, called during transport creation, does memory allocation. This information, though, is not propagated to upper layers, and any driver using the attribute_container_device_trigger API will not know whether any, some, or all callbacks succeeded. This patch implements a safe version of this dispatcher, to either succeed all the callbacks or revert to the original state. Link: https://lore.kernel.org/r/20200106185817.640331-2-krisman@collabora.com Reviewed-by:
-
Nick Black authored
A faulty userspace that calls destroy_session() before destroying the connections can trigger the failure. This patch prevents the issue by refusing to destroy the session if there are outstanding connections. ------------[ cut here ]------------ kernel BUG at mm/slub.c:306! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:__slab_free+0x181/0x350 [...] [ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246 [ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800 [ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40 [ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26 [ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00 [ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000 [ 1209.691213] FS: 00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000 [ 1209.692316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0 [ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1209.695631] Call Trace: [ 1209.695957] ? __wake_up_common_lock+0x8a/0xc0 [ 1209.696712] iscsi_pool_free+0x26/0x40 [ 1209.697263] iscsi_session_teardown+0x2f/0xf0 [ 1209.698117] iscsi_sw_tcp_session_destroy+0x45/0x60 [ 1209.698831] iscsi_if_rx+0xd88/0x14e0 [ 1209.699370] netlink_unicast+0x16f/0x200 [ 1209.699932] netlink_sendmsg+0x21a/0x3e0 [ 1209.700446] sock_sendmsg+0x4f/0x60 [ 1209.700902] ___sys_sendmsg+0x2ae/0x320 [ 1209.701451] ? cp_new_stat+0x150/0x180 [ 1209.701922] __sys_sendmsg+0x59/0xa0 [ 1209.702357] do_syscall_64+0x52/0x160 [ 1209.702812] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1209.703419] RIP: 0033:0x7f7946433914 [...] [ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914 [ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005 [ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07 [ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038 [ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace a2d933ede7f730d8 ]--- Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.com Signed-off-by:
Nick Black <nlb@google.com> Co-developed-by:
Salman Qazi <sqazi@google.com> Signed-off-by:
Junho Ryu <jayr@google.com> Signed-off-by:
Khazhismel Kumykov <khazhy@google.com> Signed-off-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
-
Stanley Chu authored
Add vendor-specific variant callback "apply_dev_quirks" to MediaTek UFS driver. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578726707-6596-3-git-send-email-stanley.chu@mediatek.com Reviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
-
