- Jun 08, 2017
-
-
Luca Abeni authored
This patch implements a more theoretically sound algorithm for tracking active utilization: instead of decreasing it when a task blocks, use a timer (the "inactive timer", named after the "Inactive" task state of the GRUB algorithm) to decrease the active utilization at the so called "0-lag time". Tested-by:
Claudio Scordino <claudio@evidence.eu.com> Tested-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by:
Luca Abeni <luca.abeni@santannapisa.it> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it> Link: http://lkml.kernel.org/r/1495138417-6203-3-git-send-email-luca.abeni@santannapisa.it Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Luca Abeni authored
Active utilization is defined as the total utilization of active (TASK_RUNNING) tasks queued on a runqueue. Hence, it is increased when a task wakes up and is decreased when a task blocks. When a task is migrated from CPUi to CPUj, immediately subtract the task's utilization from CPUi and add it to CPUj. This mechanism is implemented by modifying the pull and push functions. Note: this is not fully correct from the theoretical point of view (the utilization should be removed from CPUi only at the 0 lag time), a more theoretically sound solution is presented in the next patches. Tested-by:
Luca Abeni <luca.abeni@unitn.it> Signed-off-by:
Juri Lelli <juri.lelli@arm.com> Cc: Claudio Scordino <claudio@evidence.eu.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it> Link: http://lkml.kernel.org/r/1495138417-6203-2-git-send-email-luca.abeni@santannapisa.it Signed-off-by:
-
Peter Zijlstra authored
Hackbench recently suffered a bunch of pain, first by commit: 4c77b18c ("sched/fair: Make select_idle_cpu() more aggressive") and then by commit: c743f0a5 ("sched/fair, cpumask: Export for_each_cpu_wrap()") which fixed a bug in the initial for_each_cpu_wrap() implementation that made select_idle_cpu() even more expensive. The bug was that it would skip over CPUs when bits were consequtive in the bitmask. This however gave me an idea to fix select_idle_cpu(); where the old scheme was a cliff-edge throttle on idle scanning, this introduces a more gradual approach. Instead of stopping to scan entirely, we limit how many CPUs we scan. Initial benchmarks show that it mostly recovers hackbench while not hurting anything else, except Mason's schbench, but not as bad as the old thing. It also appears to recover the tbench high-end, which also suffered like hackbench. Tested-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
- Jun 05, 2017
-
-
Perr Zhang authored
There is no more set_task_vxid() helper, remove its description. Signed-off-by:
Perr Zhang <strongbox8@zoho.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170602035953.28949-1-strongbox8@zoho.com Signed-off-by:
-
- May 24, 2017
-
-
Peter Zijlstra authored
The more strict early boot preemption warnings found that __set_sched_clock_stable() was incorrectly assuming we'd still be running on a single CPU: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id+0x1c/0x1e CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2-00108-g1c3c5eab #1 Call Trace: dump_stack+0x110/0x192 check_preemption_disabled+0x10c/0x128 ? set_debug_rodata+0x25/0x25 debug_smp_processor_id+0x1c/0x1e sched_clock_init_late+0x27/0x87 [...] Fix it by disabling IRQs. Reported-by:
kernel test robot <xiaolong.ye@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: lkp@01.org Cc: tipbuild@zytor.com Link: http://lkml.kernel.org/r/20170524065202.v25vyu7pvba5mhpd@hirez.programming.kicks-ass.net Signed-off-by:
-
- May 23, 2017
-
-
Arnd Bergmann authored
The newly introduced wrapper function only has one caller, and this one is conditional, causing a harmless warning when CONFIG_CPU_FREQ is disabled: arch/x86/kernel/tsc.c:189:13: error: 'set_cyc2ns_scale' defined but not used [-Werror=unused-function] My first idea was to move the wrapper inside of that #ifdef, but on second thought it seemed nicer to remove it completely again and rename __set_cyc2ns_scale back to set_cyc2ns_scale, but leaving the extra argument. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Thomas Gleixner authored
might_sleep() and smp_processor_id() checks are enabled after the boot process is done. That hides bugs in the SMP bringup and driver initialization code. Enable it right when the scheduler starts working, i.e. when init task and kthreadd have been created and right before the idle task enables preemption. Tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Thomas Gleixner authored
might_sleep() debugging and smp_processor_id() debugging should be active right after the scheduler starts working. The init task can invoke smp_processor_id() from preemptible context as it is pinned on the boot cpu until sched_smp_init() removes the pinning and lets it schedule on all non isolated cpus. Add a new state which allows to enable those checks earlier and add it to the xen do_poweroff() function. No functional change. Tested-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in kswapd_run() to handle the extra states. Tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170516184736.119158930@linutronix.de Signed-off-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in boot_delay_msec() to handle the extra states. Tested-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in core_kernel_text() to handle the extra states, i.e. to cover init text up to the point where the system switches to state RUNNING. Tested-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in async_run_entry_fn() and async_synchronize_cookie_domain() to handle the extra states. Tested-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20170516184735.865155020@linutronix.de Signed-off-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in of_iommu_driver_present() to handle the extra states. Tested-by:
Joerg Roedel <joro@8bytes.org> Acked-by:
Robin Murphy <robin.murphy@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20170516184735.788023442@linutronix.de Signed-off-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state checks in dmar_parse_one_atsr() and dmar_iommu_notify_scope_dev() to handle the extra states. Signed-off-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in pas_cpufreq_cpu_exit() to handle the extra states. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170516184735.620023128@linutronix.de Signed-off-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. get_nid_for_pfn() checks for system_state == BOOTING to decide whether to use early_pfn_to_nid() when CONFIG_DEFERRED_STRUCT_PAGE_INIT=y. That check is dubious, because the switch to state RUNNING happes way after page_alloc_init_late() has been invoked. Change the check to less than RUNNING state so it covers the new intermediate states as well. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20170516184735.528279534@linutronix.de Signed-off-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Make the decision whether a pci root is hotplugged depend on SYSTEM_RUNNING instead of !SYSTEM_BOOTING. It makes no sense to cover states greater than SYSTEM_RUNNING as there are not hotplug events on reboot and poweroff. Tested-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in smp_generic_cpu_bootable() to handle the extra states. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170516184735.359536998@linutronix.de Signed-off-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in stop_this_cpu() to handle the extra states. Signed-off-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in announce_cpu() to handle the extra states. Signed-off-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in smp_send_stop() to handle the extra states. Tested-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20170516184735.112589728@linutronix.de Signed-off-by:
-
Thomas Gleixner authored
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in ipi_cpu_stop() to handle the extra states. Signed-off-by:
-
Thomas Gleixner authored
Some of the boot code in init_kernel_freeable() which runs before SMP bringup assumes (rightfully) that it runs on the boot CPU and therefore can use smp_processor_id() in preemptible context. That works so far because the smp_processor_id() check starts to be effective after smp bringup. That's just wrong. Starting with SMP bringup and the ability to move threads around, smp_processor_id() in preemptible context is broken. Aside of that it does not make sense to allow init to run on all CPUs before sched_smp_init() has been run. Pin the init to the boot CPU so the existing code can continue to use smp_processor_id() without triggering the checks when the enabling of those checks starts earlier. Tested-by:
-
Vlastimil Babka authored
A customer has reported a soft-lockup when running an intensive memory stress test, where the trace on multiple CPU's looks like this: RIP: 0010:[<ffffffff810c53fe>] [<ffffffff810c53fe>] native_queued_spin_lock_slowpath+0x10e/0x190 ... Call Trace: [<ffffffff81182d07>] queued_spin_lock_slowpath+0x7/0xa [<ffffffff811bc331>] change_protection_range+0x3b1/0x930 [<ffffffff811d4be8>] change_prot_numa+0x18/0x30 [<ffffffff810adefe>] task_numa_work+0x1fe/0x310 [<ffffffff81098322>] task_work_run+0x72/0x90 Further investigation showed that the lock contention here is pmd_lock(). The task_numa_work() function makes sure that only one thread is let to perform the work in a single scan period (via cmpxchg), but if there's a thread with mmap_sem locked for writing for several periods, multiple threads in task_numa_work() can build up a convoy waiting for mmap_sem for read and then all get unblocked at once. This patch changes the down_read() to the trylock version, which prevents the build up. For a workload experiencing mmap_sem contention, it's probably better to postpone the NUMA balancing work anyway. This seems to have fixed the soft lockups involving pmd_lock(), which is in line with the convoy theory. Signed-off-by:
Rik van Riel <riel@redhat.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170515131316.21909-1-vbabka@suse.cz Signed-off-by:
-
Dave Kleikamp authored
With CONFIG_RT_GROUP_SCHED=y, do_sched_rt_period_timer() sequentially takes each CPU's rq->lock. On a large, busy system, the cumulative time it takes to acquire each lock can be excessive, even triggering a watchdog timeout. If rt_rq->rt_time and rt_rq->rt_nr_running are both zero, this function does nothing while holding the lock, so don't bother taking it at all. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
When priority inheritance was added back in 2.6.18 to sched_setscheduler(), it added a path to taking an rt-mutex wait_lock, which is not IRQ safe. As PI is not a common occurrence, lockdep will likely never trigger if sched_setscheduler was called from interrupt context. A BUG_ON() was added to trigger if __sched_setscheduler() was ever called from interrupt context because there was a possibility to take the wait_lock. Today the wait_lock is irq safe, but the path to taking it in sched_setscheduler() is the same as the path to taking it from normal context. The wait_lock is taken with raw_spin_lock_irq() and released with raw_spin_unlock_irq() which will indiscriminately enable interrupts, which would be bad in interrupt context. The problem is that normalize_rt_tasks, which is called by triggering the sysrq nice-all-RT-tasks was changed to call __sched_setscheduler(), and this is done from interrupt context! Now __sched_setscheduler() takes a "pi" parameter that is used to know if the priority inheritance should be called or not. As the BUG_ON() only cares about calling the PI code, it should only bug if called from interrupt context with the "pi" parameter set to true. Reported-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by:
-
Byungchul Park authored
pick_next_pushable_dl_task(rq) has BUG_ON(rq->cpu != task_cpu(task)) when it returns a task other than NULL, which means that task_cpu(task) must be rq->cpu. So if task == next_task, then task_cpu(next_task) must be rq->cpu as well. Remove the redundant condition and make the code simpler. This way one unnecessary branch and two LOAD operations can be avoided. Signed-off-by:
Byungchul Park <byungchul.park@lge.com> Signed-off-by:
-
Byungchul Park authored
pick_next_pushable_task(rq) has BUG_ON(rq_cpu != task_cpu(task)) when it returns a task other than NULL, which means that task_cpu(task) must be rq->cpu. So if task == next_task, then task_cpu(next_task) must be rq->cpu as well. Remove the redundant condition and make the code simpler. This way one unnecessary branch and two LOAD operations can be avoided. Signed-off-by:
-
Byungchul Park authored
Now that we've added llist_for_each_entry_safe(), use it to simplify an open coded version of it in sched_ttwu_pending(). Signed-off-by:
-
Byungchul Park authored
Sometimes we have to dereference next field of llist node before entering loop becasue the node might be deleted or the next field might be modified within the loop. So this adds the safe version of llist_for_each(), that is, llist_for_each_safe(). Signed-off-by:
Huang, Ying <ying.huang@intel.com> Cc: <kernel-team@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1494549416-10539-1-git-send-email-byungchul.park@lge.com Signed-off-by:
-
Peter Zijlstra authored
The cpumasks in smp_call_function_many() are private and not subject to concurrency, atomic bitops are pointless and expensive. Signed-off-by:
-
Aaron Lu authored
Inter-Processor-Interrupt(IPI) is needed when a page is unmapped and the process' mm_cpumask() shows the process has ever run on other CPUs. page migration, page reclaim all need IPIs. The number of IPI needed to send to different CPUs is especially large for multi-threaded workload since mm_cpumask() is per process. For smp_call_function_many(), whenever a CPU queues a CSD to a target CPU, it will send an IPI to let the target CPU to handle the work. This isn't necessary - we need only send IPI when queueing a CSD to an empty call_single_queue. The reason: flush_smp_call_function_queue() that is called upon a CPU receiving an IPI will empty the queue and then handle all of the CSDs there. So if the target CPU's call_single_queue is not empty, we know that: i. An IPI for the target CPU has already been sent by 'previous queuers'; ii. flush_smp_call_function_queue() hasn't emptied that CPU's queue yet. Thus, it's safe for us to just queue our CSD there without sending an addtional IPI. And for the 'previous queuers', we can limit it to the first queuer. To demonstrate the effect of this patch, a multi-thread workload that spawns 80 threads to equally consume 100G memory is used. This is tested on a 2 node broadwell-EP which has 44cores/88threads and 32G memory. So after 32G memory is used up, page reclaiming starts to happen a lot. With this patch, IPI number dropped 88% and throughput increased about 15% for the above workload. Signed-off-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a regression in the skcipher interface that allows bogus key parameters to hit underlying implementations which can cause crashes" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: skcipher - Add missing API setkey checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fix from Kees Cook: "Marta noticed another misbehavior in EFI pstore, which this fixes. Hopefully this is the last of the v4.12 fixes for pstore!" * tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: efi-pstore: Fix write/erase id tracking
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These revert a 4.11 change that turned out to be problematic and add a .gitignore file. Specifics: - Revert a 4.11 commit related to the ACPI-based handling of laptop lids that made changes incompatible with existing user space stacks and broke things there (Lv Zheng). - Add .gitignore to the ACPI tools directory (Prarit Bhargava)" * tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / button: Remove lid_init_state=method mode" tools/power/acpi: Add .gitignore file -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix RTC wakeup from suspend-to-idle broken recently, fix CPU idleness detection condition in the schedutil cpufreq governor, fix a cpufreq driver build failure, fix an error code path in the power capping framework, clean up the hibernate core and update the intel_pstate documentation. Specifics: - Fix RTC wakeup from suspend-to-idle broken by the recent rework of ACPI wakeup handling (Rafael Wysocki). - Update intel_pstate driver documentation to reflect the current code and explain how it works in more detail (Rafael Wysocki). - Fix an issue related to CPU idleness detection on systems with shared cpufreq policies in the schedutil governor (Juri Lelli). - Fix a possible build issue in the dbx500 cpufreq driver (Arnd Bergmann). - Fix a function in the power capping framework core to return an error code instead of 0 when there's an error (Dan Carpenter). - Clean up variable definition in the hibernation core (Pushkar Jambhlekar)" * tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: dbx500: add a Kconfig symbol PM / hibernate: Declare variables as static PowerCap: Fix an error code in powercap_register_zone() RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() cpufreq: intel_pstate: Document the current behavior and user interface cpufreq: schedutil: use now as reference when aggregating shared policy requests -
Jan Kiszka authored
We need to initializes those variables to 0 for platforms that do not provide ACPI parameters. Otherwise, we set sda_hold_time to random values, breaking e.g. Galileo and IOT2000 boards. Reported-and-tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: 9d640843 ("i2c: designware: don't infer timings described by ACPI from clock rate") Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Kees Cook authored
Prior to the pstore interface refactoring, the "id" generated during a backend pstore_write() was only retained by the internal pstore inode tracking list. Additionally the "part" was ignored, so EFI would encode this in the id. This corrects the misunderstandings and correctly sets "id" during pstore_write(), and uses "part" directly during pstore_erase(). Reported-by:
Marta Lofstedt <marta.lofstedt@intel.com> Fixes: 76cc9580 ("pstore: Replace arguments for write() API") Fixes: a61072aa ("pstore: Replace arguments for erase() API") Signed-off-by:
Kees Cook <keescook@chromium.org> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Mostly netfilter bug fixes in here, but we have some bits elsewhere as well. 1) Don't do SNAT replies for non-NATed connections in IPVS, from Julian Anastasov. 2) Don't delete conntrack helpers while they are still in use, from Liping Zhang. 3) Fix zero padding in xtables's xt_data_to_user(), from Willem de Bruijn. 4) Add proper RCU protection to nf_tables_dump_set() because we cannot guarantee that we hold the NFNL_SUBSYS_NFTABLES lock. From Liping Zhang. 5) Initialize rcv_mss in tcp_disconnect(), from Wei Wang. 6) smsc95xx devices can't handle IPV6 checksums fully, so don't advertise support for offloading them. From Nisar Sayed. 7) Fix out-of-bounds access in __ip6_append_data(), from Eric Dumazet. 8) Make atl2_probe() propagate the error code properly on failures, from Alexey Khoroshilov. 9) arp_target[] in bond_check_params() is used uninitialized. This got changes from a global static to a local variable, which is how this mistake happened. Fix from Jarod Wilson. 10) Fix fallout from unnecessary NULL check removal in cls_matchall, from Jiri Pirko. This is definitely brown paper bag territory..." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: sched: cls_matchall: fix null pointer dereference vsock: use new wait API for vsock_stream_sendmsg() bonding: fix randomly populated arp target array net: Make IP alignment calulations clearer. bonding: fix accounting of active ports in 3ad net: atheros: atl2: don't return zero on failure path in atl2_probe() ipv6: fix out of bound writes in __ip6_append_data() bridge: start hello_timer when enabling KERNEL_STP in br_stp_start smsc95xx: Support only IPv4 TCP/UDP csum offload arp: always override existing neigh entries with gratuitous ARP arp: postpone addr_type calculation to as late as possible arp: decompose is_garp logic into a separate function arp: fixed error in a comment tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0 netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT ebtables: arpreply: Add the standard target sanity check netfilter: nf_tables: revisit chain/object refcounting from elements netfilter: nf_tables: missing sanitization in data from userspace netfilter: nf_tables: can't assume lock is acquired when dumping set elems netfilter: synproxy: fix conntrackd interaction ...
-
