- Jan 19, 2010
-
-
Kukjin Kim authored
This patch moves GPIO common functions (from plat-s3c64xx) into plat-samsung. and adds the config option to build the plat-samsung/gpiolib for Samsung SoCs. Signed-off-by:
Adityapratap Sharma <aditya.ps@samsung.com> Signed-off-by:
Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Merge branch 'next-samsung-serial1' into next-samsung-try7
-
Ben Dooks authored
Merge branch 'next-samsung-clock2' into next-samsung-try7
-
Ben Dooks authored
Merge branch 'next-samsung-devupdates1' into next-samsung-try7
-
Ben Dooks authored
Merge branch 'next-jassi-spi' into next-samsung-try7
-
Thomas Abraham authored
This patch modifies s3c24xx_serial_initconsole function to accept multiple platform UART information structures. This is required on platforms that have differences among the instances of UART ports. As an example, the FIFO sizes could be different for each UART instance and hence multiple platform UART information structures would be needed. This patch also modifies the s3c24xx_console_init macro since it wraps the call to the s3c24xx_serial_initconsole function. Signed-off-by:
Thomas Abraham <thomas.ab@samsung.com> Signed-off-by:
-
Ben Dooks authored
Merge branch 'next-samsung-clock2' into next-samsung-try5
-
Ben Dooks authored
Merge branch 'next-samsung-devupdates1' into next-samsung-try5
-
Ben Dooks authored
Merge branch 'next-jassi-spi' into next-samsung-try5
-
Ben Dooks authored
Merge branch 'next-s3c6410-andygreen' into next-samsung-try5
-
Ben Dooks authored
Merge branch 'next-samsung-mc-adc' into next-samsung-try5 Conflicts: arch/arm/mach-s3c6400/include/mach/map.h (fix ADC and RTC merge)
-
Ben Dooks authored
Add a s3c24xx_mci_set_platdata() call for all the machine files that have platform data for the MCI driver. This brings the MCI device into line with the other devices with __initdata and a specific call to ensure the right structure type is being passed. Signed-off-by: -
Ben Dooks authored
There's no point in having these in until there is proper support for them, so remove as they only confuse the device changing script. Signed-off-by: -
Ben Dooks authored
Add a platform data helper for the OHCI device Signed-off-by: -
Ben Dooks authored
Move s3c24xx_uart_devs, s3c24xx_uart_src and the platform devices to a common entry in plat-samsung since they are the same in all the current implementations. Signed-off-by:
-
- Jan 18, 2010
-
-
Jassi Brar authored
Platform devices for SPI Controller of S3C64XX are defined and exported for machines to include. Also, controller setup helper functions are defined for machine code to set runtime configuration of the controller and the bus. Signed-off-by:
Jassi Brar <jassi.brar@samsung.com> Signed-off-by:
-
Jassi Brar authored
We need a way to pass controller specific information to the SPI driver. For that purpose new headers are made. SPI Controller is assumed 'type-s3c64xx' and can be defined for newer SoCs. Hence, that part is placed under plat-samsung to be shared across newer SoCs. SoC specific part - spi source clocks, will be placed under plat-<soc>/include/plat/ Signed-off-by:
-
Jassi Brar authored
Defined special 48MHz clock sources for SPI-0,1. Signed-off-by:
-
Jassi Brar authored
Added SPI controller register base. Signed-off-by:
-
Ben Dooks authored
The call has been assuming all clksrc-clks' divider size is 4 bits, but this may not be the case anymore. Use the reg_div.size parameter to calculate the maximum value it can take and check against that. Signed-off-by: -
Ben Dooks authored
The WARN_ON() was only checking the first clock in the array, instead of being executed for each clksrc clock being registered. Since this is an array of clocks, WARN_ON() does not provide a lot of useful information about the problem, so change to using printk(KERN_ERR) to report the problem to the console. As a note, we still try and register the clock even if these problems are present just in case and to avoid changing the behaviour of the registration process. Signed-off-by: -
Thomas Abraham authored
Adds a additional check in s3c_set_clksrc function to ensure that the clksrc_clk does have a choice of multiple clock sources. In addition to this, a check is added to ensure that a parent is assigned to the clksrc_clk in case it does not have a choice of parent clocks. Signed-off-by:
-
Ben Dooks authored
The clk_hd0 and clk_pd0 where given a local dummy_enable call due to not being registered with the clock code, which they really should have been. Register these two clocks and remove the clk_dummy_enable as this is done by the default clock registration code. Signed-off-by: -
Andy Green authored
LAN9115 Ethernet only works on SMDK6410 if certain switches are set in specific ways. Document the requirement. Signed-off-by:
Andy Green <andy@warmcat.com> Signed-off-by:
-
Andy Green authored
This adds the physical address of the SROM unit, and applies a virtual mapping for it to the S3C_VA_MEM slot. Signed-off-by:
-
Andy Green authored
Since the mach-smdk6410.c file claims it can start up the smsc9115 ethernet device on the board, it should take care about configuring the necessary chip select nCS1 so it can see the chip. The select defaults to 8-bit mode so without config the Ethernet doesn't work. This patch uses the new SROM definitions to set nCS1 to the state found in the Samsung U-Boot port for 6410. It may be more conservative that it needs to be since those settings were marked as for CS8900A also using this chip select. But this change is enough to get the ethernet working when booted with Qi. Signed-off-by:
-
Andy Green authored
This introduces a platform file for s3c64xx that defines the SROM unit registers that control chip select characteristics. Signed-off-by:
-
Ben Dooks authored
Merge branch 'next-s3c64xx' into next-samsung Conflicts: arch/arm/mach-s3c6400/include/mach/map.h ( ADC and RTC PA merge fixed)
-
Maurus Cuelenaere authored
Add S3C64XX support to the generic Samsung ADC driver Signed-off-by:
Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by:
-
Maurus Cuelenaere authored
Move S3C24XX ADC driver to plat-samsung Signed-off-by:
-
Jassi Brar authored
Define resources needed by the I2S drivers in platform code. Audio cfg_gpio callback and IORESOURCE_DMA are added. Signed-off-by:
-
Maurus Cuelenaere authored
Add S3C64XX RTC platform driver Signed-off-by:
-
- Jan 15, 2010
-
-
Ben Dooks authored
The SMDK2413 has a commented out device that does not have any setup data for it, so remove it for now. Signed-off-by: -
Ben Dooks authored
Prepare for the forthcoming device changes by renaming s3c_device_usb to s3c_device_ohci as this is what the device represents. Signed-off-by: -
Kukjin Kim authored
This patch adds UART serial port support for S5P6440 CPU. Most of the serial support of Samsung's 6400 CPU is reused for 6440 CPU. Signed-off-by:
-
Kukjin Kim authored
This patch adds Samsung's S5P6440 default configuration file. Signed-off-by:
-
Kukjin Kim authored
This patch adds Samsung's SMDK6440 board support file. Signed-off-by:
-
Kukjin Kim authored
This patch adds the Kconfig and Makefile for the new S5P6440 machine and platform directories. It also updates arch/arm Kconfig and Makefiles to include the support for the new S5P6440 CPU. Signed-off-by:
-
Kukjin Kim authored
This patch adds timer support for S5P6440 CPU. Signed-off-by:
-
Kukjin Kim authored
This patch adds IRQ support for S5P6440 CPU. Signed-off-by:
-
