- Jul 13, 2022
-
-
Chris Wilson authored
In monitoring a transcode pipeline that is latency sensitive (it waits between submitting frames, and each frame requires work on rcs/vcs/vecs engines), it is found that it took longer than a single jiffy for it to sustain its workload. Allowing an extra jiffy headroom for the userspace prevents us from prematurely parking and having to exit powersaving immediately. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/6284 Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Karolina Drobnik <karolina.drobnik@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
We employ a "waitboost" heuristic to detect when userspace is stalled waiting for results from earlier execution. Under latency sensitive work mixed between the gpu/cpu, the GPU is typically under-utilised and so RPS sees that low utilisation as a reason to downclock the frequency, causing longer stalls and lower throughput. The user left waiting for the results is not impressed. On applying commit 047a1b87 ("dma-buf & drm/amdgpu: remove dma_resv workaround") it was observed that deinterlacing h264 on Haswell performance dropped by 2-5x. The reason being that the natural workload was not intense enough to trigger RPS (using HW evaluation intervals) to upclock, and so it was depending on waitboosting for the throughput. Commit 047a1b87 ("dma-buf & drm/amdgpu: remove dma_resv workaround") changes the composition of dma-resv from keeping a single write fence + multiple read fences, to a single array of multiple write and read fences (a maximum of one pair of write/read fences per context). The iteration order was also changed implicitly from all-read fences then the single write fence, to a mix of write fences followed by read fences. It is that ordering change that belied the fragility of waitboosting. Currently, a waitboost is inspected at the point of waiting on an outstanding fence. If the GPU is backlogged such that we haven't yet stated the request we need to wait on, we force the GPU to upclock until the completion of that request. By changing the order in which we waited upon requests, we ended up waiting on those requests in sequence and as such we saw that each request was already started and so not a suitable candidate for waitboosting. Instead of asking whether to boost each fence in turn, we can look at whether boosting is required for the dma-resv ensemble prior to waiting on any fence, making the heuristic more robust to the order in which fences are stored in the dma-resv. Reported-by:
Thomas Voegtle <tv@lio96.de> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6284 Fixes: 047a1b87 ("dma-buf & drm/amdgpu: remove dma_resv workaround") Signed-off-by:
-
Chris Wilson authored
Avoid trying to invalidate the TLB in the middle of performing an engine reset, as this may result in the reset timing out. Currently, the TLB invalidate is only serialised by its own mutex, forgoing the uncore lock, but we can take the uncore->lock as well to serialise the mmio access, thereby serialising with the GDRST. Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with i915 selftest/hangcheck. Cc: stable@vger.kernel.org # v4.4 and upper Fixes: 7938d615 ("drm/i915: Flush TLBs before releasing backing store") Reported-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Tested-by:
Chris Wilson <chris.p.wilson@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
Don't allow two engines to be reset in parallel, as they would both try to select a reset bit (and send requests to common registers) and wait on that register, at the same time. Serialize control of the reset requests/acks using the uncore->lock, which will also ensure that no other GT state changes at the same time as the actual reset. Cc: stable@vger.kernel.org # v4.4 and upper Reported-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Acked-by:
-
- Jul 12, 2022
-
-
Matt Roper authored
This workaround may need to be extended to other platforms soon, but for now it's marked as DG2-specific. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Arun R Murthy <arun.r.murthy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220708215804.2889246-1-matthew.d.roper@intel.com
-
- Jul 11, 2022
-
-
Matthew Auld authored
If we encounter some monster sized local-memory page that exceeds the maximum sg length (UINT32_MAX), ensure that don't end up with some misaligned address in the entry that follows, leading to fireworks later. Also ensure we have some coverage of this in the selftests. v2(Chris): - Use round_down consistently to avoid udiv errors v3(Nirmoy): - Also update the max_segment in the selftest Fixes: f701b16d ("drm/i915/ttm: add i915_sg_from_buddy_resource") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6379 Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@linux.intel.com> Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220711085859.24198-1-matthew.auld@intel.com
-
Dan Carpenter authored
The shmem_pin_map() function doesn't return error pointers, it returns NULL. Fixes: be1cb55a ("drm/i915/gt: Keep a no-frills swappable copy of the default context state") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
- Jul 09, 2022
-
-
Radhakrishna Sripada authored
Add Meteorlake PCI IDs. Split into M, and P subplatforms. v2: Update PCI id's v3: Move id 7d60 under MTL_M(MattR) Bspec: 55420 Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
MTL has Xe_LPD+ display IP (version = 14), MTL graphics IP (version = 12.70), and Xe_LPM+ media IP (version = 13). Bspec: 55413 Bspec: 55416 Bspec: 55417 Bspec: 55418 Bspec: 55726 Bspec: 45544 Bspec: 65380 v2: rearrange the fields in pci_info(MattR) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
Although all DSS belong to a single pool on Xe_HP platforms (i.e., they're not organized into slices from a topology point of view), we do still need to pass 'group' and 'instance' targets when steering register accesses to a specific instance of a per-DSS multicast register. The rules for how to determine group and instance IDs (which previously used legacy terms "slice" and "subslice") varies by platform. Some platforms determine steering by gslice membership, some platforms by cslice membership, and future platforms may have other rules. Since looping over each DSS and performing steered unicast register accesses is a relatively common pattern, let's add a dedicated iteration macro to handle this (and replace the platform-specific "instdone" loop we were using previously. This will avoid the calling code needing to figure out the details about how to obtain steering IDs for a specific DSS. Most of the places where we use this new loop are in the GPU errorstate code at the moment, but we do have some additional features coming in the future that will also need to loop over each DSS and steer some register accesses accordingly. Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220701232006.1016135-1-matthew.d.roper@intel.com
-
- Jul 08, 2022
-
-
Umesh Nerlige Ramappa authored
The global sseu config is applicable only to gen11 platforms where concurrent media, render and OA use cases may cause some subslices to be turned off and hence lose NOA configuration. Ideally we want to return ENODEV for non-gen11 platforms, however, this has shipped with gfx12, so disable only for gfx12.50+. v2: gfx12 is already shipped with this, disable for gfx12.50+ (Lionel) v3: (Matt) - Update commit message and replace "12.5" with "12.50" - Replace DRM_DEBUG() with driver specific drm_dbg() Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Acked-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
-
Umesh Nerlige Ramappa authored
DRM_DEBUG is not the right debug call to use in i915 OA, replace it with driver specific drm_dbg() call (Matt). Signed-off-by:
-
- Jul 07, 2022
-
-
Chris Wilson authored
Since we are not holding a wakeref, shrinking a bound object is not guaranteed. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6370 Signed-off-by:
-
Alan Previn authored
Both error-capture and relay-logging mechanism use the GuC log infrastructure. That means the KMD must send a log flush complete notification back to GuC after reading the data out. This call is currently being sent synchronously. However, synchronous H2Gs cause problems when the system is backed up. There is no need for this to be synchronous. The KMD wasn't even looking at the return status from it. So make it asynchronous and then there is no issue about time outs. Signed-off-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
- Jul 04, 2022
-
-
Thomas Hellström authored
In vma destruction, the following race may occur: Thread 1: Thread 2: i915_vma_destroy(); ... list_del_init(vma->vm_link); ... mutex_unlock(vma->vm->mutex); __i915_vm_release(); release_references(); And in release_reference() we dereference vma->vm to get to the vm gt pointer, leading to a use-after free. However, __i915_vm_release() grabs the vm->mutex so the vm won't be destroyed before vma->vm->mutex is released, so extract the gt pointer under the vm->mutex to avoid the vma->vm dereference in release_references(). v2: Fix a typo in the commit message (Andi Shyti) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5944 Fixes: e1a7ab4f ("drm/i915: Remove the vm open count") Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.con> Reviewed-by:
-
- Jul 02, 2022
-
-
Niranjana Vishwanathapura authored
VM_BIND and related uapi definitions v2: Reduce the scope to simple Mesa use case. v3: Expand VM_UNBIND documentation and add I915_GEM_VM_BIND/UNBIND_FENCE_VALID and I915_GEM_VM_BIND_TLB_FLUSH flags. v4: Remove I915_GEM_VM_BIND_TLB_FLUSH flag and add additional documentation for vm_bind/unbind. v5: Remove TLB flush requirement on VM_UNBIND. Add version support to stage implementation. v6: Define and use drm_i915_gem_timeline_fence structure for all timeline fences. v7: Rename I915_PARAM_HAS_VM_BIND to I915_PARAM_VM_BIND_VERSION. Update documentation on async vm_bind/unbind and versioning. Remove redundant vm_bind/unbind FENCE_VALID flag, execbuf3 batch_count field and I915_EXEC3_SECURE flag. v8: Remove I915_GEM_VM_BIND_READONLY and minor documentation updates. Signed-off-by:Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Niranjana Vishwanathapura authored
Add some missing i915 uapi documentation which the new i915 VM_BIND feature documentation will be refer to. Signed-off-by:
-
Niranjana Vishwanathapura authored
VM_BIND design document with description of intended use cases. v2: Reduce the scope to simple Mesa use case. v3: Expand documentation on dma-resv usage, TLB flushing and execbuf3. v4: Remove vm_bind tlb flush request support. v5: Update TLB flushing documentation. v6: Update out of order completion documentation. Signed-off-by: -
Matt Roper authored
Small BAR support has now landed, which allows us to add the PCI IDs that correspond to add-in card designs of DG2 and ATS-M. There's also one additional MB-down PCI ID that recently appeared (0x5698) so we add it too. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220701152231.529511-2-matthew.d.roper@intel.com
-
- Jul 01, 2022
-
-
Gustavo Sousa authored
A new PVC-specific workaround has just been added to the BSpec. BSpec: 64027 Signed-off-by:
Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by:
-
Matthew Auld authored
With the uAPI in place we should now have enough in place to ensure a working system on small BAR configurations. v2: (Nirmoy & Thomas): - s/full BAR/Resizable BAR/ which is hopefully more easily understood by users. Signed-off-by: -
Matthew Auld authored
Falling back to memcpy/memset shouldn't be allowed if we know we have CCS state to manage using the blitter. Otherwise we are potentially leaving the aux CCS state in an unknown state, which smells like an info leak. Fixes: 48760ffe ("drm/i915/gt: Clear compress metadata for Flat-ccs objects") Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-12-matthew.auld@intel.com
-
Matthew Auld authored
If the move or clear operation somehow fails, and the memory underneath is not cleared, like when moving to lmem, then we currently fallback to memcpy or memset. However with small-BAR systems this fallback might no longer be possible. For now we use the set_wedged sledgehammer if we ever encounter such a scenario, and mark the object as borked to plug any holes where access to the memory underneath can happen. Add some basic selftests to exercise this. v2: - In the selftests make sure we grab the runtime pm around the reset. Also make sure we grab the reset lock before checking if the device is wedged, since the wedge might still be in-progress and hence the bit might not be set yet. - Don't wedge or put the object into an unknown state, if the request construction fails (or similar). Just returning an error and skipping the fallback should be safe here. - Make sure we wedge each gt. (Thomas) - Peek at the unknown_state in io_reserve, that way we don't have to export or hand roll the fault_wait_for_idle. (Thomas) - Add the missing read-side barriers for the unknown_state. (Thomas) - Some kernel-doc fixes. (Thomas) v3: - Tweak the ordering of the set_wedged, also add FIXME. Signed-off-by: -
Matthew Auld authored
We should always be explicit and allocate a fence slot before adding a new fence. Signed-off-by:
-
Matthew Auld authored
It's not supported, and just skips later anyway. With small-BAR things get more complicated since all of stolen is likely not even CPU accessible, hence not passing I915_BO_ALLOC_GPU_ONLY just results in the object create failing. Signed-off-by:
-
Matthew Auld authored
A non-recoverable context must be used if the user wants proper error capture on discrete platforms. In the future the kernel may want to blit the contents of some objects when later doing the capture stage. Also extend to newer integrated platforms. v2(Thomas): - Also extend to newer integrated platforms, for capture buffer memory allocation purposes. v3 (Reported-by:kernel test robot <lkp@intel.com>):> - Fix build on !CONFIG_DRM_I915_CAPTURE_ERROR Testcase: igt@gem_exec_capture@capture-recoverable Signed-off-by:
-
Matthew Auld authored
Skip capturing any lmem pages that can't be copied using the CPU. This in now only best effort on platforms that have small BAR. Testcase: igt@gem-exec-capture@capture-invisible Signed-off-by:
-
Matthew Auld authored
If set, force the allocation to be placed in the mappable portion of I915_MEMORY_CLASS_DEVICE. One big restriction here is that system memory (i.e I915_MEMORY_CLASS_SYSTEM) must be given as a potential placement for the object, that way we can always spill the object into system memory if we can't make space. Testcase: igt@gem-create@create-ext-cpu-access-sanity-check Testcase: igt@gem-create@create-ext-cpu-access-big Signed-off-by:
-
Matthew Auld authored
On small BAR configurations, when dealing with I915_MEMORY_CLASS_DEVICE allocations, we assume that by default, all userspace allocations should be placed in the non-CPU visible portion. Note that dumb buffers are not included here, since these are not "GPU accelerated" and likely need CPU access. We choose to just always set GPU_ONLY, and let the backend figure out if that should be ignored or not, for example on full BAR systems. In a later patch userspace will be able to provide a hint if CPU access to the buffer is needed. v2(Thomas) - Apply GPU_ONLY on all discrete devices, but only if the BO can be placed in LMEM. Down in the depths this should be turned into a noop, where required, and as an annotation it still make some sense. If we apply it regardless of the placements then we end up needing to check the placements during exec capture. Also it's slightly inconsistent since the NEEDS_CPU_ACCESS can only be applied on objects that can be placed in LMEM. The other annoyance would be gem_create_ext vs plain gem_create, if we were to always apply GPU_ONLY. Testcase: igt@gem-create@create-ext-cpu-access-sanity-check Testcase: igt@gem-create@create-ext-cpu-access-big Signed-off-by:
-
Matthew Auld authored
No longer used. Signed-off-by:
-
Matthew Auld authored
Vulkan would like to have a rough measure of how much device memory can in theory be allocated. Also add unallocated_cpu_visible_size to track the visible portion, in case the device is using small BAR. Also tweak the locking so we nice consistent values for both the mm->avail and the visible tracking. v2: tweak the locking slightly so we update the mm->avail and visible tracking as one atomic operation, such that userspace doesn't get strange values when sampling the values. Testcase: igt@i915_query@query-regions-unallocated Testcase: igt@i915_query@query-regions-sanity-check Signed-off-by:
-
Matthew Auld authored
Userspace wants to know the size of CPU visible portion of device local-memory, and on small BAR devices the probed_size is no longer enough. In Vulkan, for example, it would like to know the size in bytes for CPU visible VkMemoryHeap. We already track the io_size for each region, so plumb that through to the region query. v2: Drop the ( -1 = unknown ) stuff, which is confusing since nothing can currently ever return such a value. Testcase: igt@i915_query@query-regions-sanity-check Signed-off-by:
-
Matthew Auld authored
Add an entry for the new uapi needed for small BAR on DG2+. v2: - Some spelling fixes and other small tweaks. (Akeem & Thomas) - Rework error capture interactions, including no longer needing NEEDS_CPU_ACCESS for objects marked for capture. (Thomas) - Add probed_cpu_visible_size. (Lionel) v3: - Drop the vma query for now. - Add unallocated_cpu_visible_size as part of the region query. - Improve the docs some more, including documenting the expected behaviour on older kernels, since this came up in some offline discussion. v4: - Various improvements all over. (Tvrtko) v5: - Include newer integrated platforms when applying the non-recoverable context and error capture restriction. (Thomas) Mesa: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16739 Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Acked-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Reviewed-by:
Jordan Justen <jordan.l.justen@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-1-matthew.auld@intel.com
-
Daniele Ceraolo Spurio authored
The only difference between the ADL S and P GuC FWs is the HWConfig support. ADL-N does not support HWConfig, so we should use the same binary as ADL-S, otherwise the GuC might attempt to fetch a config table that does not exist. ADL-N is internally identified as an ADL-P, so we need to special-case it in the FW selection code. Fixes: 7e28d0b2 ("drm/i915/adl-n: Enable ADL-N platform") Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
-
- Jun 30, 2022
-
-
Vinay Belgaumkar authored
This test will validate we can achieve actual frequency of RP0. Pcode grants frequencies based on what GuC is requesting. However, thermal throttling can limit what is being granted. Add a test to request for max, but don't fail the test if RP0 is not granted due to throttle reasons. Also optimize the selftest by using a common run_test function to avoid code duplication. Rename the "clamp" tests to vary_max_freq and vary_min_freq. v2: Fix compile warning v3: Review comments (Ashutosh). Added a FIXME for the media RP0 case. v4: Checkpatch (strict) fixes, remove FIXME and other comments (Ashutosh) Fixes commit 8ee2c227 ("drm/i915/guc/slpc: Add SLPC selftest") Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
- Jun 29, 2022
-
-
Nirmoy Das authored
For some platfroms we use stop_machine version of gen8_ggtt_insert_page/gen8_ggtt_insert_entries to avoid a concurrent GGTT access bug but this causes a circular locking dependency warning: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ggtt->error_mutex); lock(dma_fence_map); lock(&ggtt->error_mutex); lock(cpu_hotplug_lock); Fix this by calling gen8_ggtt_insert_page/gen8_ggtt_insert_entries directly at error capture which is concurrent GGTT access safe because reset path make sure of that. v2: Fix rebase conflict and added a comment. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5595 Reviewed-by:Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Suggested-by:
-
- Jun 28, 2022
-
-
Vinay Belgaumkar authored
SLPC min/max frequency updates require H2G calls. We are seeing timeouts when GuC channel is backed up and it is unable to respond in a timely fashion causing warnings and affecting CI. This is seen when waitboosting happens during a stress test. this patch updates the waitboost path to use a non-blocking H2G call instead, which returns as soon as the message is successfully transmitted. v2: Use drm_notice to report any errors that might occur while sending the waitboost H2G request (Tvrtko) v3: Add drm_notice inside force_min_freq (Ashutosh) Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
Umesh Nerlige Ramappa authored
For execlists backend, current implementation of Wa_22011802037 is to stop the CS before doing a reset of the engine. This WA was further extended to wait for any pending MI FORCE WAKEUPs before issuing a reset. Add the extended steps in the execlist path of reset. In addition, extend the WA to gen11. v2: (Tvrtko) - Clarify comments, commit message, fix typos - Use IS_GRAPHICS_VER for gen 11/12 checks v3: (Daneile) - Drop changes to intel_ring_submission since WA does not apply to it - Log an error if MSG IDLE is not defined for an engine Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Alan Previn authored
Using two different types of workoads, it was observed that guc_update_engine_gt_clks was being called too frequently and/or causing a CPU-to-lmem bandwidth hit over PCIE. Details on the workloads and numbers are in the notes below. Background: At the moment, guc_update_engine_gt_clks can be invoked via one of 3 ways. #1 and #2 are infrequent under normal operating conditions: 1.When a predefined "ping_delay" timer expires so that GuC- busyness can sample the GTPM clock counter to ensure it doesn't miss a wrap-around of the 32-bits of the HW counter. (The ping_delay is calculated based on 1/8th the time taken for the counter go from 0x0 to 0xffffffff based on the GT frequency. This comes to about once every 28 seconds at a GT frequency of 19.2Mhz). 2.In preparation for a gt reset. 3.In response to __gt_park events (as the gt power management puts the gt into a lower power state when there is no work being done). Root-cause: For both the workloads described farther below, it was observed that when user space calls IOCTLs that unparks the gt momentarily and repeats such calls many times in quick succession, it triggers calling guc_update_engine_gt_clks as many times. However, the primary purpose of guc_update_engine_gt_clks is to ensure we don't miss the wraparound while the counter is ticking. Thus, the solution is to ensure we skip that check if gt_park is calling this function earlier than necessary. Solution: Snapshot jiffies when we do actually update the busyness stats. Then get the new jiffies every time intel_guc_busyness_park is called and bail if we are being called too soon. Use half of the ping_delay as a safe threshold. NOTE1: Workload1: IGTs' gem_create was modified to create a file handle, allocate memory with sizes that range from a min of 4K to the max supported (in power of two step-sizes). Its maps, modifies and reads back the memory. Allocations and modification is repeated until total memory allocation reaches the max. Then the file handle is closed. With this workload, guc_update_engine_gt_clks was called over 188 thousand times in the span of 15 seconds while this test ran three times. With this patch, the number of calls reduced to 14. NOTE2: Workload2: 30 transcode sessions are created in quick succession. While these sessions are created, pcm-iio tool was used to measure I/O read operation bandwidth consumption sampled at 100 milisecond intervals over the course of 20 seconds. The total bandwidth consumed over 20 seconds without this patch was measured at average at 311KBps per sample. With this patch, the number went down to about 175Kbps which is about a 43% savings. Signed-off-by: -
Niranjana Vishwanathapura authored
This reverts commit 1e98d8c5 . The problem with this patch is that it makes i915_request to hold a reference to intel_context, which in turn holds a reference on the VM. This strong back referencing can lead to reference loops which leads to resource leak. An example is the upcoming VM_BIND work which requires VM to hold a reference to some shared VM specific BO. But this BO's dma-resv fences holds reference to the i915_request thus leading to reference loop. v2: Do not use reserved requests for virtual engines Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
-
