Commit 71338cb4

 ("drm/amd/display: enable idle optimizations for linux
(MALL stutter)") adds active_vblank_irq_count to amdgpu_display_manager
in ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h.

The kerneldoc is incorrectly formatted, and make htmldocs warns:

  ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:
    340: warning: Incorrect use of kernel-doc format:          * @active_vblank_irq_count
    379: warning: Function parameter or member 'active_vblank_irq_count' not described in 'amdgpu_display_manager'

Tweak the kerneldoc for active_vblank_irq_count.

Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable gpu recovery for navy_flounder by default to trigger
reset once needed.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in
amdgpu_device_asic_has_dc_support(). This info should be only called once.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921


Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

dc_allow_idle_optimizations() needs to be protected by
CONFIG_DRM_AMD_DC_DCN.

Fixes: 71338cb4

 ("drm/amd/display: enable idle optimizations for linux (MALL stutter)")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch is to improve the fine grain tuning function for Renoir.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together.
And the flag "od_enabled" is used to control the overdrive function for
dGPU, like navi10, navi14 and navi21.
APU like Renior or Vangogh uses this "od_enabled" to configure
the frequency range of gfx clock, but the max value of frequency
range will not be higher than the safe limit, it is not "overdrive".
So this patch adds two new flags -- "fine_grain_enabled" and
"fine_grain_started" to avoid this confusion, the flag will
make these two sysfs nodes work separately.
The flag "fine_grain_enabled" is set as "enabled" by default,
so the fine grain tuning function will be enabled by default.
But the flag "fine_grain_started" is set as "false" by default,
so the fine grain function will not take effect until it is set as
"true".
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag "fine_grain_started" will be set as "true",
and the fine grain tuning function will be started.
In other profile modes, including "auto", "high", "low", "profile_peak",
"profile_standard", "profile_min_sclk", "profile_min_mclk",
the flag "fine_grain_started" will be set as "false", and the od range of
fine grain tuning function will be restored default value.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This pacth is to add the parameters of power profiles for vangogh,
includeing "profile_peak", "profile_standard", "profile_min_sclk",
"profile_min_mclk".

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

psp GFX_CTRL_CMD_ID_CONSUME_CMD different for windows and linux,
according to psp, linux cmds are not correct.

v2: only correct GFX_CTRL_CMD_ID_CONSUME_CMD.

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add check for SExSH clients in kfd interrupt handler.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

According to hw, after navi10,it runs in dfll mode, and should
read sclk from AverageGfxclkFrequency.

Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add one more 2k resolution which appears frequently in market.

Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit a135a1b4.

This leads to blank screens on some boards after replugging a
display.  Revert until we understand the root cause and can
fix both the leak and the blank screen after replug.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211033
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1427


Cc: Stylon Wang <stylon.wang@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Andre Tomt <andre@tomt.net>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Similar to commit <b8217575

>("drm/amdgpu: fix IH overflow on Vega10 v2").
When an ring buffer overflow happens the appropriate bit is set in the WPTR
register which is also written back to memory. But clearing the bit in the
WPTR doesn't trigger another memory writeback.

So what can happen is that we end up processing the buffer overflow over and
over again because the bit is never cleared. Resulting in a random system
lockup because of an infinite loop in an interrupt handler.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Defang Bo <bodefang@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

From Ard:

"Simply disabling -mgeneral-regs-only left and right is risky, given that
the standard AArch64 ABI permits the use of FP/SIMD registers anywhere,
and GCC is known to use SIMD registers for spilling, and may invent
other uses of the FP/SIMD register file that have nothing to do with the
floating point code in question. Note that putting kernel_neon_begin()
and kernel_neon_end() around the code that does use FP is not sufficient
here, the problem is in all the other code that may be emitted with
references to SIMD registers in it.

So the only way to do this properly is to put all floating point code in
a separate compilation unit, and only compile that unit with
-mgeneral-regs-only."

Disable support until the code can be properly refactored to support this
properly on aarch64.

Acked-by: Will Deacon <will@kernel.org>
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

added I2C address and asic support flag

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

old code wrongly used the bad page status as the function return value,
which cause amdgpu_ras_badpages_read always return failed.

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Navi12 HDCP & DTM deinitialization needs continue to free bo if already
created though initialized flag is not set.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The hw supports fp16, this is not only useful for HDR,
but also for standard dynamic range displays, because
it allows to get more precise color reproduction with
about 11 - 12 bpc linear precision in the unorm range
0.0 - 1.0.

Working fp16 scanout+display (and HDR over HDMI) was
verified on a DCE-8 asic, so i assume that the more
recent DCE-10/11 will work equally well, now that
format-specific plane scaling constraints are properly
enforced, e.g., the inability of fp16 to scale on older
hw like DCE-8 to DCE-11.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This takes hw constraints specific to pixel formats into account,
e.g., the inability of older hw to scale fp16 format framebuffers.

It should now allow safely to enable fp16 formats also on DCE-8,
DCE-10, DCE-11.0

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

And drop it when we detach.  If the shared buffer is in vram,
we need to make sure we don't put the device into runtime
suspend.

Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We need these to support PSR on DCN302

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We can only use this feature when the display is idle. When active vblank
irq count is 0 we know all the displays are idle.

[How]
-Add a active vblank irq counter
-Update the counter when we enable/disable vblank irq
-if vblank irq count is 0 we can consider mall stutter

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nick Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[How]
 - use dc interface instead of hwss interface in cursor functions, to keep
dc->idle_optimizations_allowed updated
 - add dc interface to check if idle optimizations might apply to a plane

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some of the newly added code is hidden inside of #ifdef
blocks, but one variable is unused when debugfs is disabled:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8370:8: error: unused variable 'configure_crc' [-Werror,-Wunused-variable]

Change the #ifdef to an if(IS_ENABLED()) check to fix the warning
and avoid adding more #ifdefs.

Fixes: c920888c

 ("drm/amd/display: Expose new CRC window property")
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/core/dc.c:1543:12-19: WARNING: Comparison
to bool
drivers/gpu/drm/amd/display/dc/core/dc.c:1496:14-42: WARNING: Comparison
to bool
drivers/gpu/drm/amd/display/dc/core/dc.c:971:15-48: WARNING: Comparison
to bool
drivers/gpu/drm/amd/display/dc/core/dc.c:976:15-44: WARNING: Comparison
to bool

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add an underscore in amdgpu_trace.h line 24 "_AMDGPU_TRACE_H".

Fixes: d38ceaf9

 ("drm/amdgpu: add core driver (v4)")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Chenyang Li <lichenyang@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Don't open-code DIV_ROUND_UP() kernel macro.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix the following coccinelle report:
drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c:1357:6-8:
WARNING: possible condition with no effect (if == else)

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove including <linux/version.h> that don't need it.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch is to improve the fine grain tuning function for RV/RV2/PCO.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together. So this patch adds one flag to avoid this confusion, the flag
will make these two sysfs nodes work separately.
The flag is set as "disabled" by default, so the fine grain tuning function
will be disabled by default.
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag will be set as "enabled",
and the fine grain tuning function will be enabled.
In other profile modes, including "auto", "high", "low",
"profile_peak", "profile_standard", "profile_min_sclk",
"profile_min_mclk", the flag will be set as "disabled",
and the od range of fine grain tuning function will
be restored default value.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch is to enable dclk/vclk dpm function in "auto" power profile
for vangogh.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In the psp command submit logic,
the function msleep(1) delayed too long,
Changing it to usleep_range(10, 100) to
have a better performance.

Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch is to fix the failure when change power profile to
"profile_peak" for renoir.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove unnecessary include of navi10_enum header file.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove hdp_flush function from amdgpu_nbio struct as it have been unified
into hdp struct.
Remove the include about hdp register which was not used.
V2: Remove hdp golden setting which is unnecessary.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Switch to use the HDP functions which unified on hdp structure instead of
the scattered hdp callback functions.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Switch to use the HDP functions which unified on hdp structure instead of
the scattered hdp callback functions.
V2: clean up hdp reset ras error count function.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Unify hdp related function into hdp structure for hdp version 5.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Unify hdp related function into hdp structure for hdp version 4.
V2: Add function to remap hdp registers for nbio version 6.1

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_hdp hold all the callbacks for hdp

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Asic funcs pointer needs being checked whether is NULL. Because when
check_atom_bios() fails in req_init_data handshake, asic funcs pointer
is not initialized yet.

Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>