- Mar 24, 2018
-
-
Joel Stanley authored
These bindings describe the watchdog IP as used by the Nuvoton NPCM750 (Poleg) BMC SoC. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
- Mar 10, 2018
-
-
Fabrizio Castro authored
On iWave's boards iwg20d and iwg22d the only way to reboot the system is by means of the watchdog. This patch adds a restart handler to rwdt_ops, and also makes sure we keep its priority to the lowest level, in order to not override other more effective handlers. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by:
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Fabrizio Castro authored
Due to commits: * "ARM: shmobile: Add watchdog support", * "ARM: shmobile: rcar-gen2: Add watchdog support", and * "soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2", we now have everything we needed for the watchdog to work on Gen2 and RZ/G1. However, on early revisions of some R-Car Gen2 SoCs, and depending on SMP configuration, the system may fail to restart on watchdog time-out, and lock up instead. Specifically: - On R-Car H2 ES1.0 and M2-W ES1.0, watchdog restart fails unless only the first CPU core is in use (using e.g. the "maxcpus=1" kernel commandline option). - On R-Car V2H ES1.1, watchdog restart fails unless SMP is disabled completely (using CONFIG_SMP=n during build configuration, or using the "nosmp" or "maxcpus=0" kernel commandline options). This commit adds "renesas,rcar-gen2-wdt" as compatible string for R-Car Gen2 and RZ/G1, but also prevents the system from using the watchdog driver in cases where the system would fail to restart by blacklisting the affected SoCs, using the minimum known working revisions (ES2.0 on R-Car H2, and ES3.0 on M2-W), and taking the actual SMP software configuration into account. Signed-off-by: -
Fabrizio Castro authored
On R-Car Gen2 and RZ/G1 the watchdog IP clock needs to be always ON, on R-Car Gen3 we power the IP down during suspend. This commit adds suspend/resume support, so that the watchdog counting "pauses" during suspend on all of the SoCs compatible with this driver and on those we are now adding support for (R-Car Gen2 and RZ/G1). Signed-off-by:
-
- Mar 04, 2018
-
-
Jerry Hoemann authored
Update driver version number to reflect changes. Signed-off-by:
Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by:
-
Jerry Hoemann authored
Add a few dynamic debug messages to aid in module level debug. Signed-off-by:
-
Jerry Hoemann authored
Make whether or not the hpwdt watchdog delivers a pretimeout NMI programable by the user. The underlying iLO hardware is programmable as to whether or not a pre-timeout NMI is delivered to the system before the iLO resets the system. However, the iLO does not allow for programming the length of time that NMI is delivered before the system is reset. By watchdog API, in hpwdt_set_pretimeout a val == 0 disables the NMI. When val != 0, hpwdt_set_pretimeout will enable the pretimeout NMI provided the current timeout is greator than the HW specified pretimeout length. Otherwise an error is returned. In set_timeout, if the new timeout is <= an already established pretimeout, the pretimeout is canceled. This matches the action watchdog_set_timeout in the watchdog core would do if an hpwdt specific set_timeout function wasn't specified. Signed-off-by:
-
Jerry Hoemann authored
The intent of this parameter is unclear and it sets up a race between the reset of the system by ASR and crashdump. The length of time between receipt of the pretimeout NMI and the ASR reset of the system is fixed by hardware. Turning the parameter off doesn't necessairly prevent a crash dump. Also, having the ASR reset occur while the system is crash dumping doesn't imply that the dump was hung given the short duration between the NMI and the reset. This parameter is not a substitute for having a architected watchdog crashdump hang detection paridigm. Signed-off-by:
-
Jerry Hoemann authored
Modify prior change to not claim an NMI unless originated from iLO to apply only to iLO5 and later going forward. This restores hpwdt traditional behavior of calling panic if the NMI is NMI_IO_CHECK, NMI_SERR, or NMI_UNKNOWN for legacy hardware. Signed-off-by:
-
Jerry Hoemann authored
Follow Documentation/watchdog/convert_drivers_to_kernel_api.txt to convert hpwdt from legacy watchdog driver to use the watchdog core. Removed functions: hpwdt_open, hpwdt_release, hpwdt_write, hpwdt_ioctl Removed data structures: hpwdt_fops, hpwdt_miscdev, watchdog_device Modified functions: hpwdt_start, hpwdt_stop, hpwdt_ping, hpwdt_gettimeleft Added functions: hpwdt_settimeout Added structures: watchdog_device Update Kconfig file to show that hpwdt now selects WATCHDOG_CORE. Signed-off-by:
-
Jerry Hoemann authored
Include the nmistat in the nmi_panic message to give support an indication why the NMI was called (e.g. a timeout or generate nmi button.) Signed-off-by:
-
Jerry Hoemann authored
Update Copyright and Module description to reflect branding changes. Signed-off-by:
-
Alexey Khoroshilov authored
If devm_reset_control_get_exclusive() fails, asm9260_wdt_probe() returns immediately. But clks has been already enabled at that point, so it is required to disable them or to move the code around. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by:
-
Marcus Folkesson authored
Licence text is specifying "GPLv2" but the MODULE_LICENSE is set to "GPLv2 or later". See include/linux/module.h: "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] When on it, add SPDX identifier tag. Signed-off-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by:
Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Marcus Folkesson authored
Signed-off-by:
-
Marcus Folkesson authored
watchdog_init_timeout() will preserve wdd->timeout value if no parameter nor timeout-secs dt property is set. Signed-off-by:
-
Marcus Folkesson authored
watchdog_init_timeout() will preserve wdd->timeout value if no parameter nor timeout-secs dt property is set. Signed-off-by:
-
Marcus Folkesson authored
watchdog_init_timeout() will preserve wdd->timeout value if no parameter nor timeout-secs dt property is set. Signed-off-by:
Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by:
-
Marcus Folkesson authored
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. Following best practice described in Documentation/watchdog/watchdog-kernel-api.txt to make use of the parameter logic. Signed-off-by:
-
Marcus Folkesson authored
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by:
-
Marcus Folkesson authored
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Marcus Folkesson authored
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. Following best practice described in Documentation/watchdog/watchdog-kernel-api.txt to make use of the parameter logic. Signed-off-by:
-
Marcus Folkesson authored
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by:
-
Marcus Folkesson authored
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Marcus Folkesson authored
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. Following best practice described in Documentation/watchdog/watchdog-kernel-api.txt to make use of the parameter logic. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Marcus Folkesson authored
By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by:
-
- Mar 03, 2018
-
-
Jerry Hoemann authored
Gen8 and prior Proliant systems supported the "CRU" interface to firmware. This interfaces allows linux to "call back" into firmware to source the cause of an NMI. This feature isn't fully utilized as the actual source of the NMI isn't printed, the driver only indicates that the source couldn't be determined when the call fails. With the advent of Gen9, iCRU replaces the CRU. The call back feature is no longer available in firmware. To be compatible and not attempt to call back into firmware on system not supporting CRU, the SMBIOS table is consulted to determine if it is safe to make the call back or not. This results in about half of the driver code being devoted to either making CRU calls or determing if it is safe to make CRU calls. As noted, the driver isn't really using the results of the CRU calls. Furthermore, as a consequence of the Spectre security issue, the BIOS/EFI calls are being wrapped into Spectre-disabling section. Removing the call back in hpwdt_pretimeout assists in this effort. As the CRU sourcing of the NMI isn't required for handling the NMI and there are security concerns with making the call back, remove the legacy (pre Gen9) NMI sourcing and the DMI code to determine if the system had the CRU interface. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
-
Jayachandran C authored
According to SBSA spec v3.1 section 5.3: All registers are 32 bits in size and should be accessed using 32-bit reads and writes. If an access size other than 32 bits is used then the results are IMPLEMENTATION DEFINED. [...] The Generic Watchdog is little-endian The current code uses readq to read the watchdog compare register which does a 64-bit access. This fails on ThunderX2 which does not implement 64-bit access to this register. Fix this by using lo_hi_readq() that does two 32-bit reads. Signed-off-by:
Jayachandran C <jnair@caviumnetworks.com> Reviewed-by:
-
Igor Pylypiv authored
Watchdog close is "expected" when any byte is 'V' not just the last one. Writing "V" to the device fails because the last byte is the end of string. $ echo V > /dev/watchdog f71808e_wdt: Unexpected close, not stopping watchdog! Signed-off-by:
Igor Pylypiv <igor.pylypiv@gmail.com> Reviewed-by:
-
- Feb 20, 2018
-
-
Wim Van Sebroeck authored
isp5100_tco.c uses watchdog core functions (from watchdog_core.c) and, when compiled without CONFIG_WATCHDOG_CORE being set, it produces the following build error: ERROR: "devm_watchdog_register_device" [drivers/watchdog/sp5100_tco.ko] undefined! ERROR: "watchdog_init_timeout" [drivers/watchdog/sp5100_tco.ko] undefined! Fix this by selecting CONFIG_WATCHDOG_CORE. Fixes: 7cd9d5ff ("watchdog: sp5100_tco: Convert to use watchdog subsystem") Signed-off-by:
-
Radu Rendec authored
xen_wdt uses watchdog core functions (from watchdog_core.c) and, when compiled without CONFIG_WATCHDOG_CORE being set, it produces the following build error: ERROR: "devm_watchdog_register_device" [drivers/watchdog/xen_wdt.ko] undefined! ERROR: "watchdog_init_timeout" [drivers/watchdog/xen_wdt.ko] undefined! Fix this by selecting CONFIG_WATCHDOG_CORE when CONFIG_XEN_WDT is set. Fixes: 18cffd68 ("watchdog: xen_wdt: use the watchdog subsystem") Signed-off-by:
Radu Rendec <radu.rendec@gmail.com> Reviewed-by:
-
Matteo Croce authored
i6300esb uses fuctions defined in watchdog_core.c, and when CONFIG_WATCHDOG_CORE is not set we have this build error: drivers/watchdog/i6300esb.o: In function `esb_remove': i6300esb.c:(.text+0xcc): undefined reference to `watchdog_unregister_device' drivers/watchdog/i6300esb.o: In function `esb_probe': i6300esb.c:(.text+0x2a1): undefined reference to `watchdog_init_timeout' i6300esb.c:(.text+0x388): undefined reference to `watchdog_register_device' make: *** [Makefile:1029: vmlinux] Error 1 Fix this by selecting CONFIG_WATCHDOG_CORE when I6300ESB_WDT is set. Fixes: 7af4ac87 ("watchdog: i6300esb: use the watchdog subsystem") Signed-off-by:
Matteo Croce <mcroce@redhat.com> Reviewed-by:
-
Arnd Bergmann authored
We can build this driver with or without NVMEM, but not built-in when NVMEM is a loadable module: drivers/watchdog/rave-sp-wdt.o: In function `rave_sp_wdt_probe': rave-sp-wdt.c:(.text+0x27c): undefined reference to `nvmem_cell_get' rave-sp-wdt.c:(.text+0x290): undefined reference to `nvmem_cell_read' rave-sp-wdt.c:(.text+0x2c4): undefined reference to `nvmem_cell_put' This adds a Kconfig dependency to enforce that. Fixes: c3bb3334 ("watchdog: Add RAVE SP watchdog driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
- Feb 19, 2018
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 Kconfig fixes from Thomas Gleixner: "Three patchlets to correct HIGHMEM64G and CMPXCHG64 dependencies in Kconfig when CPU selections are explicitely set to M586 or M686" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group x86/Kconfig: Add missing i586-class CPUs to the X86_CMPXCHG64 Kconfig group
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Thomas Gleixner: "Perf tool updates and kprobe fixes: - perf_mmap overwrite mode fixes/overhaul, prep work to get 'perf top' using it, making it bearable to use it in large core count systems such as Knights Landing/Mill Intel systems (Kan Liang) - s/390 now uses syscall.tbl, just like x86-64 to generate the syscall table id -> string tables used by 'perf trace' (Hendrik Brueckner) - Use strtoull() instead of home grown function (Andy Shevchenko) - Synchronize kernel ABI headers, v4.16-rc1 (Ingo Molnar) - Document missing 'perf data --force' option (Sangwon Hong) - Add perf vendor JSON metrics for ARM Cortex-A53 Processor (William Cohen) - Improve error handling and error propagation of ftrace based kprobes so failures when installing kprobes are not silently ignored and create disfunctional tracepoints" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) kprobes: Propagate error from disarm_kprobe_ftrace() kprobes: Propagate error from arm_kprobe_ftrace() Revert "tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h" perf s390: Rework system call table creation by using syscall.tbl perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tbl tools/headers: Synchronize kernel ABI headers, v4.16-rc1 perf test: Fix test trace+probe_libc_inet_pton.sh for s390x perf data: Document missing --force option perf tools: Substitute yet another strtoull() perf top: Check the latency of perf_top__mmap_read() perf top: Switch default mode to overwrite mode perf top: Remove lost events checking perf hists browser: Add parameter to disable lost event warning perf top: Add overwrite fall back perf evsel: Expose the perf_missing_features struct perf top: Check per-event overwrite term perf mmap: Discard legacy interface for mmap read perf test: Update mmap read functions for backward-ring-buffer test perf mmap: Introduce perf_mmap__read_event() perf mmap: Introduce perf_mmap__read_done() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "A small set of updates mostly for irq chip drivers: - MIPS GIC fix for spurious, masked interrupts - fix for a subtle IPI bug in GICv3 - do not probe GICv3 ITSs that are marked as disabled - multi-MSI support for GICv2m - various small cleanups" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro irqchip/bcm: Remove hashed address printing irqchip/gic-v2m: Add PCI Multi-MSI support irqchip/gic-v3: Ignore disabled ITS nodes irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq() irqchip/gic-v3: Change pr_debug message to pr_devel irqchip/mips-gic: Avoid spuriously handling masked interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fix from Thomas Gleixner: "A small fix which adds the missing for_each_cpu_wrap() stub for the UP case to avoid build failures" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpumask: Make for_each_cpu_wrap() available on UP as well
-
- Feb 18, 2018
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request from Keith, with fixes all over the map for nvme. From various folks. - Classic polling fix, that avoids a latency issue where we still end up waiting for an interrupt in some cases. From Nitesh Shetty. - Comment typo fix from Minwoo Im. * tag 'for-linus-20180217' of git://git.kernel.dk/linux-block: block: fix a typo in comment of BLK_MQ_POLL_STATS_BKTS nvme-rdma: fix sysfs invoked reset_ctrl error flow nvmet: Change return code of discard command if not supported nvme-pci: Fix timeouts in connecting state nvme-pci: Remap CMB SQ entries on every controller reset nvme: fix the deadlock in nvme_update_formats blk: optimization for classic polling nvme: Don't use a stack buffer for keep-alive command nvme_fc: cleanup io completion nvme_fc: correct abort race condition on resets nvme: Fix discard buffer overrun nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: - meson-gx: Revert to earlier tuning process - bcm2835: Don't overwrite max frequency unconditionally * tag 'mmc-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: bcm2835: Don't overwrite max frequency unconditionally Revert "mmc: meson-gx: include tx phase in the tuning process"
-
