- Feb 25, 2012
-
-
Bruce Allan authored
Rename e1000e_setup_link() to e1000e_setup_link_generic() to signify the function is used for more than one MAC-family type. The 82571-family has a custom setup_link function which also calls the generic function. The ich8lan-family has a custom function which should just be called via the function pointer. The 80003es2lan-family just uses the generic function. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
Rename e1000e_id_led_init() to e1000e_id_led_init_generic() to signify the function is used for more than one MAC-family type. For the ich8lan MAC family, some MACs use the generic function and others use the function e1000_id_led_init_pchlan(). In all cases where e1000e_id_led_init() was called directly, change to call the function pointer to be consistent with the driver design. Signed-off-by:
-
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by:Danny Kukawka <danny.kukawka@bisect.de>
-
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: -
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pm instead of custom code. Signed-off-by: -
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by:
Oliver Neukum <oliver@neukum.name> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by:
-
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by:
Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by:
-
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by:
-
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by:
-
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by:
-
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Use memcpy to set the address to dev->dev_addr in set_mac_address, instead of mxing it up in a for loop with printing a debug msg. Check also if the given address is valid. Signed-off-by:
-
Danny Kukawka authored
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by:
-
David S. Miller authored
Signed-off-by:
-
- Feb 24, 2012
-
-
Tushar Dave authored
Use pr_<level> for printk Use temporary instead of multiple pr_conts Coalesce formats. Save a few bytes of object code too: $ size drivers/net/ethernet/intel/e1000/e1000_main.o* text data bss dec hex filename 60507 369 14120 74996 124f4 drivers/net/ethernet/intel/e1000/e1000_main.o.new 60717 369 14176 75262 125fe drivers/net/ethernet/intel/e1000/e1000_main.o.old Removed printing of pktdata. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Tushar Dave <tushar.n.dave@intel.com> Tested-by:
-
Joe Perches authored
Separate a complicated bit of e1000_config_dsp_after_link_change into a new static function e1000_1000Mb_check_cable_length. Reduces indentation and adds a bit of clarity. Signed-off-by:
-
Bruce Allan authored
Signed-off-by:
-
Bruce Allan authored
Recent discussions on LKML, kernel-janitors, linux-wireless and netdev have suggested boolean comparisons should use logical operators instead of equality comparisons with true/false. Signed-off-by:
-
Ben Greear authored
This allows the NIC to receive the Ethernet FCS and pass it up the stack, allowing sniffers and other interested programs to inspect the FCS. Signed-off-by:Ben Greear <greearb@candelatech.com>
-
Ben Greear authored
This allows the NIC to receive packets with bad FCS and Runts, which can help when sniffing. NOTE: r8169, at least on my NIC, silently drops packets with bad FCS instead of counting them. It seems they are only received in any fashion if the RxCRC flag is set (which this patch allows). Signed-off-by: -
Ben Greear authored
This allows the NIC to pass the Ethernet FCS on up the stack, and is useful when sniffing networks. Signed-off-by: -
Ben Greear authored
This allows the NIC to receive Runts and frames with bad Ethernet Frame Checksums (FCS). Useful to sniffing & diagnosing bad networks. Signed-off-by: -
Ben Greear authored
This allows the NIC to pass the Ethernet Frame Checksum (FCS) up the stack. Useful when sniffing packets. Signed-off-by:
-
Ben Greear authored
Good for testing the RX logic for bad CRC handling. Signed-off-by:
-
Ben Greear authored
This allows the NIC to receive all frames available, including those with bad FCS, un-matched vlans, ethernet control frames, and more. Tested by sending frames with bad FCS. Signed-off-by:
-
Ben Greear authored
This flag requests that network devices pass all received frames up the stack, even ones with errors such as invalid FCS (frame check sum). This will allow sniffers to see bad packets and perhaps give the user some idea how to fix the problem. Signed-off-by:
-
Ben Greear authored
This can aid with testing the RX logic for bad CRCs. Signed-off-by:
-
Ben Greear authored
This is useful for testing RX handling of frames with bad CRCs. Requires driver support to actually put the packet on the wire properly. Signed-off-by:
-
Ben Greear authored
This enables enabling/disabling reception of the Ethernet FCS. This can be useful when sniffing packets. For e1000e, enabling RXFCS can change the default behaviour for how the NIC handles CRC. Disabling RXFCS will take the NIC back to defaults, which can be configured as part of the module options. Signed-off-by:
-
Ben Greear authored
When set on hardware that supports the feature, this causes the Ethernet FCS to be appended to the end of the skb. Useful for sniffing packets. Signed-off-by:
-
Christian Riesch authored
The CLKDIV bitfield in the MDIO Control Register is a 16 bit field, therefore the CLKDIV value may range from 0 to 0xffff. Signed-off-by:
Christian Riesch <christian.riesch@omicron.at> Signed-off-by:
-
Christian Riesch authored
chan->chan_num is 0..CPDMA_MAX_CHANNELS-1 for tx channels and CPDMA_MAX_CHANNELS..2*CPDMA_MAX_CHANNELS-1 for rx channels. However, the rx and tx teardown registers expect zero based channel numbering. Since the upper bits of the registers are reserved, the teardown also worked before, this patch is cleanup only. Signed-off-by:
-
Sathya Perla authored
Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Sathya Perla authored
Signed-off-by:
-
Sathya Perla authored
This will prevent double free in some cases where be_clear() is called for cleanup when be_setup() fails half-way. Signed-off-by:
-
Sathya Perla authored
As a part of be_close(), instead of waiting for a max of 200ms for each TXQ, wait for a total of 200ms for completions from all TXQs to arrive. Signed-off-by:
-
Sathya Perla authored
EEH recovery involves ring cleanup and re-creation. The worker thread must not run during EEH cleanup/resume. Signed-off-by:
-
Danny Kukawka authored
Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by:
-
Danny Kukawka authored
Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Danny Kukawka authored
Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by:
-
