Add mu-mimo and ofdma packet counters statistics.
The statistics are clear on read.

Reviewed-by: Money Wang <Money.Wang@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Align mt7915_vif layout to mt7921_vif and mt7615_vif

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

"ASIC revision" and "Firmware init done" shouldn't be error messages.
Reduces the severity levels.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Remove duplicated mcu definitions in mt7915 mcu.h and reused connac
ones.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Similar to mt7915 driver, rely on MCU_CMD macro and do not command
definitions directly

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Similar to MCU_EXT_CMD, introduce MCU_CE_CMD for CE commands

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Similar to MCU_EXT_CMD, introduce MCU_UNI_CMD for unified commands

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Get rid of MCU_FW_PREFIX bit since it is no longer used

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Align MCU_EXT and MCU_FW definitions between mt76_connac and mt7915
driver. This is a preliminary patch to reuse mt76_connac in mt7915
driver.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce MCU_EXT_CMD and MCU_EXT_QUERY macros in mt76_connac module.
This is a preliminary patch to reuse mt76_connac module in mt7915
driver.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

TXS in mt7921 may be forwared to tx_done event. Should try to catch
TXS information in tx_done event as well.

Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The hardware only supports WMM index 0-2 and registers for index 3 return
bogus data.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Reduces pressure on the memory allocator

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This can be used to free received events without allocating an extra skb

Signed-off-by: Felix Fietkau <nbd@nbd.name>

4addr is not supported by the offload firmware yet

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Should fix issues with error recovery

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Get rid of unsafe access since mt76_insert_ccmp_hdr moves the header.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move wiphy SAR capability configuration in mt76 module and remove
duplicated code.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

last_ch configuration must not be dependent on the current configured band
but it is defined by hw capabilities since the fw always expects the
following order:
- 2GHz
- 5GHz
- 6GHz

Fixes: 9b2ea8ee

 ("mt76: connac: set 6G phymode in single-sku support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Return the proper error code when out-of-range the Rx aggregation count
are reported from the hardware that would create the unreasonable extreme
large Rx buffer.

[  100.873810]  show_stack+0x20/0x2c
[  100.873823]  dump_stack+0xc4/0x140
[  100.873839]  bad_page+0x110/0x114
[  100.873854]  check_new_pages+0xf8/0xfc
[  100.873869]  rmqueue+0x5a0/0x640
[  100.873884]  get_page_from_freelist+0x124/0x20c
[  100.873898]  __alloc_pages_nodemask+0x114/0x2a4
[  100.873918]  mt76s_rx_run_queue+0xd4/0x2e4 [mt76_sdio 8280a88a0c8c9cf203f16e194f99ac293bdbb2f5]
[  100.873938]  mt76s_rx_handler+0xd4/0x2a0 [mt76_sdio 8280a88a0c8c9cf203f16e194f99ac293bdbb2f5]
[  100.873957]  mt76s_txrx_worker+0xac/0x17c [mt76_sdio 8280a88a0c8c9cf203f16e194f99ac293bdbb2f5]
[  100.873977]  mt7921s_txrx_worker+0x5c/0xd8 [mt7921s d0bdbc018082dbc8dc1407614be3c2e7bd64423b]
[  100.874003]  __mt76_worker_fn+0xe8/0x170 [mt76 b80af3483a8f9d48e916c12d8dbfaa0d3cd15337]
[  100.874018]  kthread+0x148/0x3ac
[  100.874032]  ret_from_fork+0x10/0x30
[  100.874067] Kernel Offset: 0x1fe2000000 from 0xffffffc010000000
[  100.874079] PHYS_OFFSET: 0xffffffe800000000
[  100.874090] CPU features: 0x0240002,2188200c

Fixes: 48fab5bb

 ("mt76: mt7921: introduce mt7921s support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Accroding to chip hw flow, mt7921s need to re-acquire privilege
again before normal running. Otherwise, the bus may be stuck in
an abnormal status.

Tested-by: Leon Yen <Leon.Yen@mediatek.com>
Co-developed-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Signed-off-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Set 6GHz cap to iftype data which is matched to the type of
current interface.

Fixes: 50ac15a5

 ("mt76: mt7921: add 6GHz support")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

./drivers/net/wireless/mediatek/mt76/mt7921/sdio_mac.c: 223: 8-9: WARNING:
return of 0/1 in function 'mt7921s_tx_status_data' with return type bool

Return statements in functions returning bool should use true/false
instead of 1/0.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mtd_read() returns -EUCLEAN in case of corrected bit-flips.
As data was read, don't error out in this case.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Leave more time to abort transmissions (which could happen at low CCK rates)
Only warn if the last filter command is stuck

Signed-off-by: Felix Fietkau <nbd@nbd.name>

If the driver has configured the hardware to drop packets for a sta that was
in powersave mode, then clearing the flag too early opens up a small race
window during which packets could be dropped on wakeup

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add SAR spec support to mt7915 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add SAR spec support to mt7603 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Typically all AP interfaces on a PHY will share the same WMM settings, while
sta/mesh interfaces will usually inherit the settings from a remote device.
In order minimize the likelihood of conflicting WMM settings, make all AP
interfaces share one slot, and all non-AP interfaces another one.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Typically all AP interfaces on a PHY will share the same WMM settings, while
sta/mesh interfaces will usually inherit the settings from a remote device.
In order minimize the likelihood of conflicting WMM settings, make all AP
interfaces share one slot, and all non-AP interfaces another one.

This also fixes running multiple AP interfaces on MT7613, which only has 3
WMM slots.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

The mask variable is assigned but not used after testmode disabled:
if (!en)
	mask = phy->mt76->chainmask;

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

According to the MT7921S firmware, the cmd MCU_UNI_CMD_HIF_CTRL have to
be last MCU command to execute in suspend handler and all data traffic
have to be stopped before the cmd MCU_UNI_CMD_HIF_CTRL starts as well
in order that mt7921 can successfully fall into the deep sleep mode.

Where we reuse the flag MT76_STATE_SUSPEND and avoid creating
another global flag to stop all of the traffic onto the SDIO bus.

Fixes: 48fab5bb

 ("mt76: mt7921: introduce mt7921s support")
Reported-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is a preliminary patch for the following patch
("mt76: mt7921s: fix the device cannot sleep deeply in suspend).

mt76_connac_mcu_set_hif_suspend eventually would be handled in each
bus-level suspend/resume handler in either mt7921/sdio.c or mt7921/pci.c
depending on what type of the bus the device is running on. We can move
mt76_connac_mcu_set_hif_suspend to bus-related files to simplify the logic.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

With 4-address mode VLAN frames, an internal header translation step fails,
leaving behind an extra 2-byte length field that must be reomved by the driver.
Add a check for this condition to fix receiving such packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>

With 4-address mode VLAN frames, an internal header translation step fails,
leaving behind an extra 2-byte length field that must be reomved by the driver.
Add a check for this condition to fix receiving such packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add SAR spec support to mt76x02 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move mt76_get_sar_power and mt76_init_sar_power in the common code.
This is a preliminary patch to add sar support to mt76x02 drivers.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Check return code from mt76_connac_mcu_set_rate_txpower() in mt7921_config
routine.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

the wiphy's available antennas may be incorrect
When ext phy's antenna_mask is different from main phy

Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

MAC80211 doesn't care any decryption error in 802.3 path, so received
frame will be dropped if HW tell us that the cipher configuration is not
matched as well as the header has been translated to 802.3. This case only
appears when IEEE80211_FCTL_PROTECTED is 0 and cipher suit is not none in
the corresponding HW entry.

The received frame is only reported to monitor interface if HW decryption
block tell us there is ICV error or CCMP/BIP/WPI MIC error. Note in this
case the reported frame is decrypted 802.11 frame and the payload may be
malformed due to mismatched key.

Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>