- Feb 09, 2023
-
-
Manivannan Sadhasivam authored
SDX65 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500" compatible as the fallback to the SoC specific compatible. Cc: <stable@vger.kernel.org> # 5.19 Fixes: 98187f7b ("ARM: dts: qcom: sdx65: Enable ARM SMMU") Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123131931.263024-4-manivannan.sadhasivam@linaro.org
-
Manivannan Sadhasivam authored
SDX55 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500" compatible as the fallback to the SoC specific compatible. Cc: <stable@vger.kernel.org> # 5.12 Fixes: a2bdfdfb ("ARM: dts: qcom: sdx55: Enable ARM SMMU") Signed-off-by:
-
Dmitry Baryshkov authored
Link hdmi_phy as a clock provider of "hdmipll" clock to the MMCC. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Add #clock-cells property to the HDMI PHY device node to let other nodes resolve the hdmipll clock. Signed-off-by:
-
Christian Marangi authored
Move node that doesn't have a reg outside the soc node as it should only contain reg nodes. No changes intended. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Yang Xiwen authored
Document the new thwc,uf896/ufi001c device tree bindings used in their device trees. Signed-off-by:
Yang Xiwen <forbidden405@foxmail.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Yang Xiwen authored
Shenzhen Tong Heng Wei Chuang Technology Co., Ltd. (hereinafter referred to as "Tong Heng Wei Chuang") is a focus on wireless communications equipment brand manufacturers. Link: http://www.szthwc.com/en/about.html Signed-off-by:
-
- Feb 04, 2023
-
-
Rajendra Nayak authored
Add compatibles for the Pro SKU of the sc7280 CRD boards which come with a Pro variant of the qcard. The Pro qcard variant has smps9 from pm8350c ganged up with smps7 and smps8. Signed-off-by:
Rajendra Nayak <quic_rjendra@quicinc.com> Acked-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
- Jan 19, 2023
-
-
Rayyan Ansari authored
Add a node for the RPM Clock Controller on MSM8226. Signed-off-by:
Rayyan Ansari <rayyan@ansari.sh> Signed-off-by:
-
Dmitry Baryshkov authored
Add clocks and clock-names nodes to the gcc device to bind clocks using the DT links. Reviewed-by:
-
Krzysztof Kozlowski authored
Bindings expect OPP tables to start with "opp-table". Signed-off-by:
-
Dmitry Baryshkov authored
Follow the schema change and rename mdp nodes to generic name 'display-controller'. Signed-off-by:
-
Dmitry Baryshkov authored
Follow the schema change and rename mdss node to generic name 'display-subsystem'. Signed-off-by:
-
Dmitry Baryshkov authored
Add SoC-specific compat string to the MDP5 device node to ease distinguishing between various platforms. Signed-off-by:
-
Nikita Travkin authored
gt58 and gt510 are Samsung Galaxy Tab A 8.0/9.7 (2015) tablets. Document their compatibles. Acked-by:
Nikita Travkin <nikita@trvn.ru> Signed-off-by:
-
Lin, Meng-Bo authored
Document the new samsung-j5x device tree bindings used in its device tree. Signed-off-by:
Lin, Meng-Bo <linmengbo0689@protonmail.com> Acked-by:
-
Alex Elder authored
Depending on the platform, either the modem or the AP must load GSI firmware for IPA before it can be used. To date, this has been indicated by the presence or absence of a "modem-init" property. That mechanism has been deprecated. Instead, we indicate how GSI firmware should be loaded by the value of the "qcom,gsi-loader" property. Update all ARM platforms that use IPA to use the "qcom,gsi-loader" property to specify how the GSI firmware is loaded. Update the affected nodes so the status property is last. Signed-off-by:
Alex Elder <elder@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Specify pre-parsed per-sensor calibration nvmem cells in the tsens device node rather than parsing the whole data blob in the driver. Signed-off-by:
-
Dmitry Baryshkov authored
Specify pre-parsed per-sensor calibration nvmem cells in the tsens device node rather than parsing the whole data blob in the driver. Signed-off-by:
-
Bjorn Andersson authored
Qualcomm ARM32 DTS fix for 6.2 This fixes a regression on Inforce 6540, as the sdhci nodes no longer overrides the platform's mmc nodes.
-
- Jan 18, 2023
-
-
Bryan O'Donoghue authored
Document the MSM8939 and supported boards in upstream Sony "Tulip" M4 Aqua and Square APQ8039 T2. MSM8939 is one of the older SoCs so we need to expand the list of qcom,board-ids to allow for the bootloader DTS board-id matching dependency. Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
- Jan 17, 2023
-
-
Dmitry Baryshkov authored
Populate the rpm clock controller node with clocks and clock-names properties. Signed-off-by:
-
- Jan 12, 2023
-
-
Lin, Meng-Bo authored
Document the new gplus,fl8005a device tree bindings used in its device tree. Signed-off-by:
-
Lin, Meng-Bo authored
Add vendor prefix for GPLUS. https://www.gplus.com.tw Signed-off-by:
-
Matti Lehtimäki authored
Uses ti,lp8556 backlight with clk-pwm. Signed-off-by:
Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by:
-
- Jan 11, 2023
-
-
Konrad Dybcio authored
Document SM6115P, an APQ version of SM6115. Document Lenovo Tab P11 (J606F) as a SM6115P device. Add SM6115 to the msm-id list of shame. Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Acked-by:
-
Krzysztof Kozlowski authored
Add missing whitespace between node name/label and opening {. Signed-off-by: -
Krzysztof Kozlowski authored
Allow qcom,board-id and qcom,msm-id leagcy properties on these older platforms: MSM8956, SDM636 and SM4250. Also mention more OnePlus devices using modified qcom,board-id field. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by:
-
Owen Yang authored
Add entries in the device tree binding for sc7280-zombie with NVMe. Signed-off-by:
Owen Yang <ecs.taipeikernel@gmail.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
-
Krzysztof Kozlowski authored
Add specific compatible to timer/watchdog device node. Signed-off-by:
-
Krzysztof Kozlowski authored
Keep only one clock frequency for timer, because: 1. DT schema does not allow multiple frequencies in such property, 2. The Linux timer driver reads only first frequency. Signed-off-by:
-
Krzysztof Kozlowski authored
Keep only one clock frequency for timer, because: 1. DT schema does not allow multiple frequencies in such property, 2. The Linux timer driver reads only first frequency. Signed-off-by:
-
Krzysztof Kozlowski authored
Keep only one clock frequency for timer, because: 1. DT schema does not allow multiple frequencies in such property, 2. The Linux timer driver reads only first frequency. Signed-off-by:
-
Krzysztof Kozlowski authored
Keep only one clock frequency for timer, because: 1. DT schema does not allow multiple frequencies in such property, 2. The Linux timer driver reads only first frequency. Signed-off-by:
-
Krzysztof Kozlowski authored
The most specific compatible should be upfront. Signed-off-by:
-
Abel Vesa authored
Document the SM8550 SoC binding and the MTP board. Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Extend the secon DSI interface with the SoC-specific compat entry, following the change for the first DSI interface. Signed-off-by:
-
- Dec 30, 2022
-
-
Bryan O'Donoghue authored
Add silicon specific compatible qcom,msm8974-dsi-ctrl to the mdss-dsi-ctrl block. This allows us to differentiate the specific bindings for msm8974 against the yaml documentation. Reviewed-by:
-
Bryan O'Donoghue authored
Append silicon specific compatible qcom,apq8064-dsi-ctrl to the mdss-dsi-ctrl block. This allows us to differentiate the specific bindings for apq8064 against the yaml documentation. Reviewed-by:
David Heidelberg <david@ixit.cz> Reviewed-by:
-
Krzysztof Kozlowski authored
Add SoC-specific compatible to the USB HS PHY to match other devices and bindings. Signed-off-by:
-
