- Jun 01, 2021
-
-
Christoph Hellwig authored
Convert the md driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210521055116.1053587-15-hch@lst.de Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Convert the dm driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Convert the bcache driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
-
Christoph Hellwig authored
Convert the lightnvm driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Convert the zram driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Convert the rsxx driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Convert the pktcdvd driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Convert the drbd driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Convert the brd driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. This also allows to remove the request_queue pointer in struct request_queue, and to simplify the initialization as blk_cleanup_disk can be called on any disk returned from blk_alloc_disk. Signed-off-by:
-
Christoph Hellwig authored
Add two new APIs to allocate and free a gendisk including the request_queue for use with BIO based drivers. This is to avoid boilerplate code in drivers. Signed-off-by:
-
Christoph Hellwig authored
Add a flag to indicate that __device_add_disk did grab a queue reference so that disk_release only drops it if we actually had it. This sort out one of the major pitfals with partially initialized gendisk that a lot of drivers did get wrong or still do. Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Reviewed-by:
-
Christoph Hellwig authored
Automatically set the GENHD_FL_EXT_DEVT flag for all disks allocated without an explicit number of minors. This is what all new block drivers should do, so make sure it is the default without boilerplate code. Signed-off-by:
-
Christoph Hellwig authored
Keep this together with the first place that actually looks at ->minors and prepare for not passing a minors argument to alloc_disk. Signed-off-by:
-
Christoph Hellwig authored
Untangle the mess around blk_alloc_devt by moving the check for the used allocation scheme into the callers. Signed-off-by:
-
- May 24, 2021
-
-
John Garry authored
The tags used for an IO scheduler are currently per hctx. As such, when q->nr_hw_queues grows, so does the request queue total IO scheduler tag depth. This may cause problems for SCSI MQ HBAs whose total driver depth is fixed. Ming and Yanhui report higher CPU usage and lower throughput in scenarios where the fixed total driver tag depth is appreciably lower than the total scheduler tag depth: https://lore.kernel.org/linux-block/440dfcfc-1a2c-bd98-1161-cec4d78c6dfc@huawei.com/T/#mc0d6d4f95275a2743d1c8c3e4dc9ff6c9aa3a76b In that scenario, since the scheduler tag is got first, much contention is introduced since a driver tag may not be available after we have got the sched tag. Improve this scenario by introducing request queue-wide tags for when a tagset-wide sbitmap is used. The static sched requests are still allocated per hctx, as requests are initialised per hctx, as in blk_mq_init_request(..., hctx_idx, ...) -> set->ops->init_request(.., hctx_idx, ...). For simplicity of resizing the request queue sbitmap when updating the request queue depth, just init at the max possible size, so we don't need to deal with the possibly with swapping out a new sbitmap for old if we need to grow. Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/1620907258-30910-3-git-send-email-john.garry@huawei.com Signed-off-by:
-
John Garry authored
The tag allocation code to alloc the sbitmap pairs is common for regular bitmaps tags and shared sbitmap, so refactor into a common function. Also remove superfluous "flags" argument from blk_mq_init_shared_sbitmap(). Signed-off-by:
-
Ming Lei authored
Before we free request queue, clearing flush request reference in tags->rqs[], so that potential UAF can be avoided. Based on one patch written by David Jeffery. Tested-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
-
Ming Lei authored
refcount_inc_not_zero() in bt_tags_iter() still may read one freed request. Fix the issue by the following approach: 1) hold a per-tags spinlock when reading ->rqs[tag] and calling refcount_inc_not_zero in bt_tags_iter() 2) clearing stale request referred via ->rqs[tag] before freeing request pool, the per-tags spinlock is held for clearing stale ->rq[tag] So after we cleared stale requests, bt_tags_iter() won't observe freed request any more, also the clearing will wait for pending request reference. The idea of clearing ->rqs[] is borrowed from John Garry's previous patch and one recent David's patch. Tested-by:
-
Ming Lei authored
Grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter(), and this way will prevent the request from being re-used when ->fn is running. The approach is same as what we do during handling timeout. Fix request use-after-free(UAF) related with completion race or queue releasing: - If one rq is referred before rq->q is frozen, then queue won't be frozen before the request is released during iteration. - If one rq is referred after rq->q is frozen, refcount_inc_not_zero() will return false, and we won't iterate over this request. However, still one request UAF not covered: refcount_inc_not_zero() may read one freed request, and it will be handled in next patch. Tested-by:
-
Ming Lei authored
For flush request, rq->end_io() may be called two times, one is from timeout handling(blk_mq_check_expired()), another is from normal completion(__blk_mq_end_request()). Move blk_account_io_flush() after flush_rq->ref drops to zero, so io accounting can be done just once for flush request. Fixes: b6866318 ("block: add iostat counters for flush requests") Reviewed-by:
-
Max Gurtovoy authored
Align to common code conventions. Signed-off-by:
Max Gurtovoy <mgurtovoy@nvidia.com> Link: https://lore.kernel.org/r/20210511155319.1885277-1-mgurtovoy@nvidia.com Signed-off-by:
-
Tejun Heo authored
blkcg has always rejected to attach if any of the member tasks has shared io_context. The rationale was that io_contexts can be shared across different cgroups making it impossible to define what the appropriate control behavior should be. However, this check causes more problems than it solves: * The check prevents controller enable and migrations but not CLONE_IO itself, which can lead to surprises as the outcome changes depending on the order of operations. * Sharing within a cgroup is fine but the check can't distinguish that. This leads to unnecessary conflicts with the recent CLONE_IO usage in io_uring. io_context sharing doesn't make any difference for rq_qos based controllers and the way it's used is safe as long as tasks aren't migrated dynamically which is the vast majority of use cases. While we can try to make the check more precise to avoid false positives, the added complexity doesn't seem worthwhile. Let's just drop blkcg_can_attach(). Signed-off-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/YJrTvHbrRDbJjw+S@slm.duckdns.org Signed-off-by:
-
Yang Yingliang authored
The mutex ktio_spawn_lock is initialized statically. It is unnecessary to initialize by mutex_init(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210511113440.3772053-1-yangyingliang@huawei.com Signed-off-by:
-
zhangyi (F) authored
Now block_dump feature is gone, remove all comments in docs. Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
zhangyi (F) authored
We have already delete block_dump feature in mark_inode_dirty() because it can be replaced by tracepoints, now we also remove the part in submit_bio() for the same reason. The part of block dump feature in submit_bio() dump the write process, write region and sectors on the target disk into kernel message. it can be replaced by block_bio_queue tracepoint in submit_bio_checks(), so we do not need block_dump anymore, remove the whole block_dump feature. Signed-off-by:
-
zhangyi (F) authored
block_dump is an old debugging interface, one of it's functions is used to print the information about who write which file on disk. If we enable block_dump through /proc/sys/vm/block_dump and turn on debug log level, we can gather information about write process name, target file name and disk from kernel message. This feature is realized in block_dump___mark_inode_dirty(), it print above information into kernel message directly when marking inode dirty, so it is noisy and can easily trigger log storm. At the same time, get the dentry refcount is also not safe, we found it will lead to deadlock on ext4 file system with data=journal mode. After tracepoints has been introduced into the kernel, we got a tracepoint in __mark_inode_dirty(), which is a better replacement of block_dump___mark_inode_dirty(). The only downside is that it only trace the inode number and not a file name, but it probably doesn't matter because the original printed file name in block_dump is not accurate in some cases, and we can still find it through the inode number and device id. So this patch delete the dirting inode part of block_dump feature. Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Two perf fixes: - Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as this can cause malfunction when TOS is not supported - Allocate the LBR XSAVE buffers along with the DS buffers upfront because allocating them when adding an event can deadlock" * tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context perf/x86: Avoid touching LBR_TOS MSR for Arch LBR -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "Two locking fixes: - Invoke the lockdep tracepoints in the correct place so the ordering is correct again - Don't leave the mutex WAITER bit stale when the last waiter is dropping out early due to a signal as that forces all subsequent lock operations needlessly into the slowpath until it's cleaned up again" * tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal locking/lockdep: Correct calling tracepoints -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A few fixes for irqchip drivers: - Allocate interrupt descriptors correctly on Mainstone PXA when SPARSE_IRQ is enabled; otherwise the interrupt association fails - Make the APPLE AIC chip driver depend on APPLE - Remove redundant error output on devm_ioremap_resource() failure" * tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Remove redundant error printing irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE ARM: PXA: Fix cplds irqdesc allocation when using legacy mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Fix how SEV handles MMIO accesses by forwarding potential page faults instead of killing the machine and by using the accessors with the exact functionality needed when accessing memory. - Fix a confusion with Clang LTO compiler switches passed to the it - Handle the case gracefully when VMGEXIT has been executed in userspace * tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Use __put_user()/__get_user() for data accesses x86/sev-es: Forward page-faults which happen during emulation x86/sev-es: Don't return NULL from sev_es_get_ghcb() x86/build: Fix location of '-plugin-opt=' flags x86/sev-es: Invalidate the GHCB after completing VMGEXIT x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix breakage of strace (and other ptracers etc.) when using the new scv ABI (Power9 or later with glibc >= 2.33). - Fix early_ioremap() on 64-bit, which broke booting on some machines. Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and Christophe Leroy. * tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls powerpc: Fix early setup to make early_ioremap() work
-
- May 23, 2021
-
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix short log indentation for tools builds - Fix dummy-tools to adjust to the latest stackprotector check * tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: dummy-tools: adjust to stricter stackprotector check scripts/jobserver-exec: Fix a typo ("envirnoment") tools build: Fix quiet cmd indentation
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "10 patches. Subsystems affected by this patch series: mm (pagealloc, gup, kasan, and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: userfaultfd: hugetlbfs: fix new flag usage in error path lib: kunit: suppress a compilation warning of frame size proc: remove Alexey from MAINTAINERS linux/bits.h: fix compilation error with GENMASK watchdog: reliable handling of timestamps kasan: slab: always reset the tag in get_freepointer_safe() tools/testing/selftests/exec: fix link error ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry Revert "mm/gup: check page posion status for coredump." mm/shuffle: fix section mismatch warning
-
Mike Kravetz authored
In commit d6995da3 ("hugetlb: use page.private for hugetlb specific page flags") the use of PagePrivate to indicate a reservation count should be restored at free time was changed to the hugetlb specific flag HPageRestoreReserve. Changes to a userfaultfd error path as well as a VM_BUG_ON() in remove_inode_hugepages() were overlooked. Users could see incorrect hugetlb reserve counts if they experience an error with a UFFDIO_COPY operation. Specifically, this would be the result of an unlikely copy_huge_page_from_user error. There is not an increased chance of hitting the VM_BUG_ON. Link: https://lkml.kernel.org/r/20210521233952.236434-1-mike.kravetz@oracle.com Fixes: d6995da3 ("hugetlb: use page.private for hugetlb specific page flags") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Mina Almasry <almasry.mina@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <songmuc...
-
Zhen Lei authored
lib/bitfield_kunit.c: In function `test_bitfields_constants': lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=] } ^ As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful for kernel devs running the KUnit test harness, and not intended for inclusion into a production build". Therefore, it is not worth modifying variable 'test_bitfields_constants' to clear this warning. Just suppress it. Link: https://lkml.kernel.org/r/20210518094533.7652-1-thunder.leizhen@huawei.com Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Vitor Massaru Iha <vitor@massaru.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
People Cc me and I don't have time. Link: https://lkml.kernel.org/r/YKarMxHJBIhMHQIh@localhost.localdomain Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Rikard Falkeborn authored
GENMASK() has an input check which uses __builtin_choose_expr() to enable a compile time sanity check of its inputs if they are known at compile time. However, it turns out that __builtin_constant_p() does not always return a compile time constant [0]. It was thought this problem was fixed with gcc 4.9 [1], but apparently this is not the case [2]. Switch to use __is_constexpr() instead which always returns a compile time constant, regardless of its inputs. Link: https://lore.kernel.org/lkml/42b4342b-aefc-a16a-0d43-9f9c0d63ba7a@rasmusvillemoes.dk [0] Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449 [1] Link: https://lore.kernel.org/lkml/1ac7bbc2-45d9-26ed-0b33-bf382b8d858b@I-love.SAKURA.ne.jp [2] Link: https://lkml.kernel.org/r/20210511203716.117010-1-rikard.falkeborn@gmail.com Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Yury Norov <yury.norov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Petr Mladek authored
Commit 9bf3bc94 ("watchdog: cleanup handling of false positives") tried to handle a virtual host stopped by the host a more straightforward and cleaner way. But it introduced a risk of false softlockup reports. The virtual host might be stopped at any time, for example between kvm_check_and_clear_guest_paused() and is_softlockup(). As a result, is_softlockup() might read the updated jiffies and detects a softlockup. A solution might be to put back kvm_check_and_clear_guest_paused() after is_softlockup() and detect it. But it would put back the cycle that complicates the logic. In fact, the handling of all the timestamps is not reliable. The code does not guarantee when and how many times the timestamps are read. For example, "period_ts" might be touched anytime also from NMI and re-read in is_softlockup(). It works just by chance. Fix all the problems by making the code even more explicit. 1. Make sure that "now" and "period_ts" timestamps are read only once. They might be changed at anytime by NMI or when the virtual guest is stopped by the host. Note that "now" timestamp does this implicitly because "jiffies" is marked volatile. 2. "now" time must be read first. The state of "period_ts" will decide whether it will be used or the period will get restarted. 3. kvm_check_and_clear_guest_paused() must be called before reading "period_ts". It touches the variable when the guest was stopped. As a result, "now" timestamp is used only when the watchdog was not touched and the guest not stopped in the meantime. "period_ts" is restarted in all other situations. Link: https://lkml.kernel.org/r/YKT55gw+RZfyoFf7@alley Fixes: 9bf3bc94 ("watchdog: cleanup handling of false positives") Signed-off-by:
Petr Mladek <pmladek@suse.com> Reported-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by:
-
Alexander Potapenko authored
With CONFIG_DEBUG_PAGEALLOC enabled, the kernel should also untag the object pointer, as done in get_freepointer(). Failing to do so reportedly leads to SLUB freelist corruptions that manifest as boot-time crashes. Link: https://lkml.kernel.org/r/20210514072228.534418-1-glider@google.com Signed-off-by:
Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Elliot Berman <eberman@codeaurora.org> Signed-off-by:
-
