This driver exposes hardware sensors of the Aquacomputer D5 Next
watercooling pump, which communicates through a proprietary USB HID
protocol.

Available sensors are pump and fan speed, power, voltage and current, as
well as coolant temperature. Also available through debugfs are the serial
number, firmware version and power-on count.

Attaching a fan is optional and allows it to be controlled using
temperature curves directly from the pump. If it's not connected,
the fan-related sensors will report zeroes.

The pump can be configured either through software or via its physical
interface. Configuring the pump through this driver is not implemented,
as it seems to require sending it a complete configuration. That
includes addressable RGB LEDs, for which there is no standard sysfs
interface. Thus, that task is better suited for userspace tools.

This driver has been tested on x86_64, both in-kernel and as a module.

Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use the devm_hwmon_device_register_with_info API and remove code that
deals with the standard sensor attributes.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210826024121.15665-4-chris.packham@alliedtelesis.co.nz


[groeck: Fixed alignment issues]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Convert the adt7470 to using regmap which allows better error handling.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210826024121.15665-3-chris.packham@alliedtelesis.co.nz


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

In preparation for the changes that follow fix up some existing style
issues.
Specifically:
- add blank line between variable declaration and code
- use strscpy instead of strlcpy
- remove unnecessary braces

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210826024121.15665-2-chris.packham@alliedtelesis.co.nz


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Yellow carp matches same behavior as green sardine and other Zen3
products, but have different CCD offsets.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20210827201527.24454-3-mario.limonciello@amd.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Some of the existing assumptions made do not scale properly
to new silicon in upcoming changes.  This commit should cause
no functional changes to existing silicon.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210827201527.24454-2-mario.limonciello@amd.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Tdie is an offset calculation that should only be shown when temp_offset
is actually put into a table.  This is useless to show for all CPU/APU.
Show it only when necessary.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

These follow the rest of the existing codepaths for families
17h and 19h.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Commit 9049572f ("hwmon: Remove amd_energy driver") removes the driver,
but misses to adjust the Makefile.

Hence, ./scripts/checkkconfigsymbols.py warns:

SENSORS_AMD_ENERGY
Referencing files: drivers/hwmon/Makefile

Remove the missing piece of this driver removal.

Fixes: 9049572f

 ("hwmon: Remove amd_energy driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210817084811.10673-1-lukas.bulwahn@gmail.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Drop #ifdef DEBUG and use ktime_us_delta()
for improved precision.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210814190516.26718-1-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Mark function i8k_get_fan_nominal_speed() as __init since
it is only used in code also marked as __init.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210814143637.11922-5-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Both the config and the DMI tables never change and
are only used during module init for setting up
the device data struct.
Mark all of them as const and __initconst for a
smaller runtime memory footprint.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210814143637.11922-2-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

BPD-RS600 modules running firmware v5.70 misreport the MFR_PIN_MAX.
The indicate a maximum of 1640W instead of 700W. Detect the invalid
reading and return a sensible value instead.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210812014000.26293-3-chris.packham@alliedtelesis.co.nz


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

In the initial implementation a number of PMBUS_x_WARN_LIMITs were
mapped to MFR fields. This was incorrect as these MFR limits reflect the
rated limit as opposed to a limit which will generate warning. Instead
return -ENXIO like we were already doing for other WARN_LIMITs.

Subsequently these rated limits have been exposed generically as new
fields in the sysfs ABI so the values are still available.

Fixes: 15b2703e

 ("hwmon: (pmbus) Add driver for BluTek BPA-RS600")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210812014000.26293-2-chris.packham@alliedtelesis.co.nz


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The HW has some predefined points where it will associate a PWM value.
However some users might want to better set these points to their
usecases. This patch exposes these points as pwm auto_points:

 * pwm1_auto_point1_temp_hyst: temperature threshold below which PWM should
   be 0%;
 * pwm1_auto_point1_temp: temperature threshold above which PWM should be
   25%;
 * pwm1_auto_point2_temp_hyst: temperature threshold below which PWM should
   be 25%;
 * pwm1_auto_point2_temp: temperature threshold above which PWM should be
   50%;
 * pwm1_auto_point3_temp_hyst: temperature threshold below which PWM should
   be 50%;
 * pwm1_auto_point3_temp: temperature threshold above which PWM should be
   75%;
 * pwm1_auto_point4_temp_hyst: temperature threshold below which PWM should
   be 75%;
 * pwm1_auto_point4_temp: temperature threshold above which PWM should be
   100%;

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210811114853.159298-4-nuno.sa@analog.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The core will now start out of reset at boot as soon as clocking is
available. Hence, by the time we unmask the interrupts we already might
have some of them set. Thus, it's important to handle them in the
natural order the core generates them. Otherwise, we could process
'ADI_IRQ_SRC_PWM_CHANGED' before 'ADI_IRQ_SRC_TEMP_INCREASE' and
erroneously set 'update_tacho_params' to true.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210811114853.159298-3-nuno.sa@analog.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The core will only work if it's clock is enabled. This patch is a
minor enhancement to make sure that's the case.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210811114853.159298-2-nuno.sa@analog.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

When doing a PMBus write for the LED control on the IBM Common Form
Factor Power Supplies (ibm-cffps), the DAh command requires that bit 7
be low and bit 6 be high in order to indicate that you are truly
attempting to do a write.

Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210806225131.1808759-1-bjwyman@gmail.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

I2C devices should match on the proper compatible string.
This is already used in one device tree in the kernel (MIPS)
so let's add the matches.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210729230543.2853485-2-linus.walleij@linaro.org


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This adds a device tree binding for the Winbond W83781D and its
sibling HW monitoring ICs. This is used in for example the Freecom
FSG-3 router/NAS.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210729230543.2853485-1-linus.walleij@linaro.org


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().

Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-14-bigeasy@linutronix.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This allows manual PWM control without the BIOS fighting back on Dell
Precision 7510. Meanwhile at it, also sort alphabetically the entries
of the i8k_whitelist_fan_control struct.

Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210802131538.8660-1-clopez@igalia.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

There are up to three fans, but the detection omits the 3rd one.
Fix that by using DELL_SMM_NO_FANS.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Fixes: 747bc8b0 (hwmon: (dell-smm) Detect fan with index=2)
Link: https://lore.kernel.org/r/20210728221557.8891-7-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Convert to new registration API to get rid of attribute magic
numbers and reduce module size.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210728221557.8891-6-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Move Variables into a driver private data structure.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210728221557.8891-5-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use devm_add_action_or_reset() for calling i8k_exit_procfs()
so the remove() function in dell_smm_driver can be omitted.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Tested-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210728221557.8891-4-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

i8k_get_dmi_data() and i8k_get_dell_signature() are
only called during module init and probe, which both
are marked as __init.
Also mark these function as __init to lower the runtime
memory footprint.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Tested-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210728221557.8891-3-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Register a platform device for usage with
devm_hwmon_device_register_with_groups since
the platform device is necessary for future
changes.
Also fix some checkpatch warnings.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210728221557.8891-2-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

- Document device tree bindings for AMD SB-RMI emulated service.

Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210726133615.9709-3-nchatrad@amd.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

- Add documentation for SB-RMI module

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20210726133615.9709-2-nchatrad@amd.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

On AMD platforms the Out-of-band access is provided by
Advanced Platform Management Link (APML), APML is a
SMBus v2.0 compatible 2-wire processor client interface.
APML is also referred as the sideband interface (SBI).

APML is used to communicate with the
Side-Band Remote Management Interface (SB-RMI) which provides
Soft Mailbox messages to manage power consumption and
power limits of the CPU socket.

- This module add support to read power consumption,
  power limit & max power limit and write power limit.
- To instantiate this driver on a Board Management Controller (BMC)
  connected to an AMD CPU with SB-RMI support, the i2c bus number
  would be the bus connected from the BMC to the CPU.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20210726133615.9709-1-nchatrad@amd.com


[groeck: Fix uninitialized variable problem when reporting max power]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Make DEVICE_ATTR_RO static to fix sparse warning:
warning: symbol 'dev_attr_cpu0_vid' was not declared. Should it be static?

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210724154817.18796-1-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use SIMPLE_DEV_PM_OPS() to also assign poweroff
and thaw callbacks. Remove the now obsolete checking
of CONFIG_PM too.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210721192519.28784-1-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Changeset 1496be71 ("dt-bindings: firmware: arm,scpi: Convert to json schema")
renamed: Documentation/devicetree/bindings/arm/arm,scpi.txt
to: Documentation/devicetree/bindings/firmware/arm,scpi.yaml.

Update its cross-reference accordingly.

Fixes: 1496be71

 ("dt-bindings: firmware: arm,scpi: Convert to json schema")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/b5a2b0cb83e7f8193b4be4cef9250dd4c42877ab.1626947923.git.mchehab+huawei@kernel.org


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add the list of sensors supported by the Silicom n5010 PAC, and enable
the drivers as a subtype of the intel-m10-bmc multi-function driver.

Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20210716135441.3235863-4-martin@geanix.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Using devm_request_region() allows us to omit
w83627ehf_remove() and also simplifies error
handling during probe.
Also fixed a checkpatch issue.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210709184501.6546-3-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Using platform_create_bundle() simplifies the module
init code and allows w83627ehf_probe() to be marked
as __init, lowering the runtime memory footprint.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210709184501.6546-2-W_Armin@gmx.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The BPD-RS600 is the DC version of the BPA-RS600. The PMBUS interface is
the same between the two models. Keep the same compatible string but
accept either BPA-RS600 or BPD-RS600 in the PMBUS_MFR_MODEL.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210708220618.23576-1-chris.packham@alliedtelesis.co.nz


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The kernel has a helper function for linear interpolation so
use it. It incidentally makes the code easier to read as well.

Tested on the ST-Ericsson HREFv60plus hardware reference design
with two thermistors forming a thermal zone.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210704222014.12058-1-linus.walleij@linaro.org


Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for Zen3 Ryzen APU.

Signed-off-by: David Bartley <andareed@gmail.com>
Link: https://lore.kernel.org/r/20210517064131.4369-1-andareed@gmail.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>