- Sep 03, 2013
-
-
Eduardo Valentin authored
In order to improve code organization, this patch moves the hwmon sysfs support to a file named thermal_hwmon. This helps to add extra support for hwmon without scrambling the code. In order to do this move, the hwmon list head is now using its own locking. Before, the list used the global thermal locking. Also, some minor changes in the code were required, as recommended by checkpatch.pl. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by:
Durgadoss R <durgadoss.r@intel.com> Signed-off-by:
Eduardo Valentin <eduardo.valentin@ti.com>
-
- Aug 29, 2013
-
-
Sachin Kamat authored
Commit 1cd1ecb6 ("thermal: exynos: Remove non DT based support") cleaned up some non-DT code. However, there were few more things needed for complete cleanup to make this driver DT only. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
NULL pointer was being dereferenced in its own error message. Changed it to the correct device pointer. Signed-off-by:
-
Sachin Kamat authored
Fixes some trivial typos. Signed-off-by:
-
Ranganath Krishnan authored
Workaround to compute thermal trend even when update interval is not set. This patch will ensure to compute the thermal trend when bandgap counter delay is not set. Signed-off-by:
Ranganath Krishnan <ranganath@ti.com> Signed-off-by:
-
Ranganath Krishnan authored
Set the bandgap mask counter_delay with the polling_delay value on registering the thermal zone. This patch will ensure to get the correct update interval for computing the thermal trend. Signed-off-by:
-
Ranganath Krishnan authored
Initialize MPU, GPU, CORE, DSPEVE and IVA thermal sensors of DRA752 bandgap with the counter delay mask. Signed-off-by:
-
- Aug 15, 2013
-
-
Zhang Rui authored
-
Eduardo Valentin authored
In case the trend is not changing or when there is no request for throttling, it is expected that the instance would not change its requested target. This patch improves the code implementation to cover for this expected behavior. With current implementation, the instance will always reset to cdev.cur_state, even in not expected cases, like those mentioned above. This patch changes the step_wise governor implementation of get_target so that we accomplish: (a) - default value will be current instance->target, so we do not change the thermal instance target unnecessarily. (b) - the code now it is clear about what is the intention. There is a clear statement of what are the expected outcomes (c) - removal of hardcoded constants, now it is put in use the THERMAL_NO_TARGET macro. (d) - variable names are also improved so that reader can clearly understand the difference between instance cur target, next target and cdev cur_state. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-by:
Ruslan Ruslichenko <ruslan.ruslichenko@ti.com> Signed-of-by:
Zhang Rui <rui.zhang@intel.com>
-
Shawn Guo authored
The cooling device only needs update on a new target state. Since we already check old target in thermal_zone_trip_update(), we can do one more check to see if it's a new target state. If not, we can reasonably save some uncecesary code execution. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
-
Zhang Rui authored
-
Lan Tianyu authored
Thermal/cpu_cooling: Return directly for the cpu out of allowed_cpus in the cpufreq_thermal_notifier() cpufreq_thermal_notifier() is to change the cpu's cpufreq in the allowed_cpus mask when associated thermal-cpufreq cdev's cooling state is changed. It's a cpufreq policy notifier handler and it will be triggered even if those cpus out of allowed_cpus has changed freq policy. cpufreq_thermal_notifier() checks the policy->cpu. If it belongs to allowed_cpus, change max_freq(default to 0) to the desire cpufreq value and pass 0 and max_freq to cpufreq_verify_within_limits() as cpufreq scope. But if not, do nothing and max_freq will remain 0. This will cause the cpufreq scope to become 0~0. This is not right. This patch is to return directly after finding cpu not belonging to allowed_cpus. Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
-
Naveen Krishna Chatradhi authored
The error check is checking for a "base" mapped memory base instead of "base_common". Fixing the same. Signed-off-by:
Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by:
-
Philipp Zabel authored
Enable automatic measurements at 10 Hz and use the alarm interrupt to react more quickly to sudden temperature changes above the passive or critical temperature trip points. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
-
Philipp Zabel authored
Set passive and critical trip point values depending on the maximum die temperature stored in the OCOTP fuses. This allows higher trip points for industrial and automotive rated i.MX6 SoCs. Also allow to configure the passive trip point from userspace. Signed-off-by:
-
Zhang Rui authored
Merge branch 'for_3.12/imx' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into imx
-
Zhang Rui authored
Merge branch 'for_3.12/exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into exynos
-
- Aug 13, 2013
-
-
Amit Daniel Kachhap authored
This patch updates the documentation to explain the driver model and file layout. Acked-by:
Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by:
Kukjin Kim <kgene.kim@samsung.com> Acked-by:
Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by:
-
Amit Daniel Kachhap authored
Proper description for Exynos4 bindings added to Documentation/devicetree/ bindings. It adds description to use multiple TMU instances, optional voltage supply node and optional shared register across multiple TMU's. Acked-by:
Lukasz Majewski <l.majewski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Amit Daniel Kachhap authored
TMU probe function now checks for a device tree defined regulator. For compatibility reasons it is allowed to probe driver even without this regulator defined. Acked-by:
-
Amit Daniel Kachhap authored
This patch adds support for h/w mode calibration in the TMU controller. Soc's like 5440 support this features. The h/w bits needed for calibration setting are same as that of enum calibration_type. Acked-by:
-
Amit Daniel Kachhap authored
This patch sets the second point trimming value according to the platform data if the register value is 0. Acked-by:
-
Amit Daniel Kachhap authored
This patch adds configuration data for exynos5440 soc. Also register definations for the controller are added. Acked-by:
-
Amit Daniel Kachhap authored
This patch modifies TMU controller to add changes needed to work with exynos5440 platform. This sensor registers 3 instance of the tmu controller with the thermal zone and hence reports 3 temperature output. This controller supports upto five trip points. For critical threshold the driver uses the core driver thermal framework for shutdown. Acked-by:
Jungseok Lee <jays.lee@samsung.com> Signed-off-by:
-
Amit Daniel Kachhap authored
This patch adds support to parse one more common set of TMU register. First set of register belongs to each instance of TMU and second set belongs to common TMU registers. Acked-by:
-
Amit Daniel Kachhap authored
This patch uses the device pointer stored in the configuration structure and converts to dev_* prints and devm API's. Acked-by:
-
Amit Daniel Kachhap authored
This patch adds several features supported by TMU as bitfields. This features varies across different SOC type and comparing the features present in the TMU is more logical than comparing the soc itself. Acked-by:
-
Amit Daniel Kachhap authored
This patch adds support to handle multiple instances of the TMU controllers. This is done by removing the static structure to register with the core thermal and creating it dynamically for each instance of the TMU controller. The interrupt is made shared type to handle shared interrupts. Now since the ISR needs the core thermal framework to be registered so request_irq is moved after the core registration is done. Also the identifier of the TMU controller is extracted from device tree alias. This will be used for TMU specific initialisation. Acked-by:
-
Amit Daniel Kachhap authored
Recently non DT support from Exynos platform is removed and hence removing non DT support from the driver also. This will help in easy maintainence. Acked-by:
-
Amit Daniel Kachhap authored
This code simplifies the zone handling to use the trip information passed by the TMU driver and not the hardcoded macros. This also helps in adding more zone support. Acked-by:
-
Amit Daniel Kachhap authored
This patch removes the error return in the bind/unbind routine as the platform may not register any cpufreq cooling data. Acked-by:
-
Amit Daniel Kachhap authored
This patch renames member private_data to driver_data of the thermal zone registration structure as this item stores the driver related data and uses it to call the driver related callbacks. Acked-by:
-
Amit Daniel Kachhap authored
This code modifies the thermal driver to have multiple thermal zone support by replacing the global thermal zone variable with device data member of thermal_zone_device. Acked-by:
-
Amit Daniel Kachhap authored
This patch uses the TMU status register to know the generated interrupts and only clear them in the interrupt handler. Acked-by:
-
Amit Daniel Kachhap authored
TMU urgently sends active-high signal (thermal trip) to PMU, and thermal tripping by hardware logic. Thermal tripping means that PMU cuts off the whole power of SoC by controlling external voltage regulator. Acked-by:
Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
Amit Daniel Kachhap authored
This patch migrates the TMU register definition/bitfields to data file. This is needed to support SoC's which use the same TMU controller but register validity, offsets or bitfield may slightly vary across SOC's. Acked-by:
-
Amit Daniel Kachhap authored
This patch adds entries min_efuse_value, max_efuse_value, default_temp_offset, trigger_type, cal_type, trim_first_point, trim_second_point, max_trigger_level trigger_enable in the TMU platform data structure. Also the driver is modified to use the data passed by these new platform memebers instead of the constant macros. All these changes helps in separating the SOC specific data part from the TMU driver. Acked-by:
-
Amit Daniel Kachhap authored
This patch adds some extra register bitfield definations and cleans up the code to prepare for moving register macros and definations inside the TMU data section. In this code cleanup the TMU enable bit is correctly used as bit0 and bit1 is taken care which is reserve bit. Acked-by:
-
Amit Daniel Kachhap authored
This code splits the exynos tmu driver code into SOC specific data parts. This will simplify adding new SOC specific data to the same TMU controller. Acked-by:
-
Amit Daniel Kachhap authored
This patch renames and moves include/linux/platform_data/exynos_thermal.h to drivers/thermal/samsung/exynos_tmu.h. This file movement is needed as exynos SOC's are not supporting non-DT based platforms and this file now just contains exynos tmu driver related definations. Also struct freq_clip_table is now moved to exynos_thermal_common.c as it fixes the compilation issue occuring because now this new tmu header file is included in tmu driver c file and not in the common thermal header file. Acked-by:
-
