- Dec 19, 2012
-
-
Max Filippov authored
The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with an Xtensa processor and an OpenCores Ethernet device. Signed-off-by:
Chris Zankel <chris@zankel.net> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Max Filippov authored
Device trees allow specification of hardware topology and device parameters at runtime instead of hard-coding them in platform setup code. This allows running single binary kernel on a range of compatible boards. New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat device tree is passed in it. Note that current interrupt mapping scheme uses single cell for interrupt identification. That means that IRQ numbers used in DTS must be CPU internal IRQ numbers, not external. It is possible to extend interrupt identification to two cells, and use second cell to tell external IRQ numbers form internal. That would allow to use single DTS on multiple boards with different mapping of external IRQ numbers. Signed-off-by:
-
Max Filippov authored
IRQ domains provide a mechanism for conversion of linux IRQ numbers to hardware IRQ numbers and vice versus. It is used by OpenFirmware for linking device tree objects to their respective interrupt controllers. Signed-off-by:
-
Max Filippov authored
Signed-off-by:
-
Max Filippov authored
- remove duplicate rules for binary and packed image - use predefined macros for ld/objcopy/gzip - remove build-id section from bootable elf image Signed-off-by:
-
Max Filippov authored
Define mb and wmb as memw to force memory barrier. Signed-off-by:
-
Max Filippov authored
Signed-off-by:
-
Max Filippov authored
Signed-off-by:
-
Max Filippov authored
Signed-off-by:
-
Max Filippov authored
Add a brief sanity test of S32C1I functionality. This instruction is needed by the kernel and userland as part of the base ABI (including GCC atomic builtins, certain threading packages, future atomic support in the C++ standard, etc). However, correct operation of this instruction requires some cooperation by hardware external to the processor (such as bus bridge, bus fabric, or memory controller). Minimally exercising this mechanism and reporting explicit status early in the boot process is helpful to chip vendors using the Linux kernel as a benchmark of correctness of hardware. As it turns out, S32C1I is not exercised by the kernel and by uClibc based userland as of early June 2008. This is expected to change soon as both incorporate more recent open source developments. Signed-off-by:
Marc Gauthier <marc@tensilica.com> Signed-off-by:
-
Max Filippov authored
trap_set_handler sets new C-handler in the exception table and returns previous handler. Signed-off-by:
-
Max Filippov authored
In order to use S32C1I instruction on cores with ATOMCTL SR the register must be properly initialized. Signed-off-by:
-
Max Filippov authored
Although scompare1 may be saved/restored by xchal_ncp_{load,store} macros, explicit save/restore of registers manipulated by the kernel itself is considered more correct. Signed-off-by: -
Max Filippov authored
Signed-off-by:
-
Max Filippov authored
Signed-off-by:
-
Max Filippov authored
Signed-off-by:
-
Max Filippov authored
Signed-off-by:
-
Max Filippov authored
This fixes the following allmodconfig build error: drivers/uio/uio_dmem_genirq.c:95:18: error: 'DMA_ERROR_CODE' undeclared (first use in this function) drivers/uio/uio_dmem_genirq.c:238:18: error: 'DMA_ERROR_CODE' undeclared (first use in this function) make[3]: *** [drivers/uio/uio_dmem_genirq.o] Error 1 Signed-off-by:
-
Max Filippov authored
This fixes the following build error in allyesconfig: drivers/tty/serial/8250/8250_early.c: In function 'parse_options': drivers/tty/serial/8250/8250_early.c:160:18: error: 'BASE_BAUD' undeclared (first use in this function) Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Chris Zankel authored
Use ENDPROC() to mark the end of assembler functions. Signed-off-by: -
Max Filippov authored
Manually load references to exc_table from the explicit literal in order to fit DoubleExceptionVector.literals into the available 16-byte gap before DoubleExceptionVector.text in the absence of link time relaxation. Without this fix DoubleExceptionVector.literal section overlaps DoubleExceptionVector.text section in the linked vmlinux image. Signed-off-by:
-
Chris Zankel authored
The default linker behavior is to optimize identical literal values and remove unnecessary overhead from assembler-generated "longcall" sequences to reduce code size. Provide an option to disable this behavior to improve compile time. Signed-off-by: -
Nicolas Kaiser authored
Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
-
Wanlong Gao authored
Fix the definition of the function ccount_read to be compatible to the member read of the structure clocksource. Signed-off-by:
Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by:
-
git://git.pengutronix.de/git/wsa/linuxLinus Torvalds authored
Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...
-
Linus Torvalds authored
Merge patches from Andrew Morton: "Most of the rest of MM, plus a few dribs and drabs. I still have quite a few irritating patches left around: ones with dubious testing results, lack of review, ones which should have gone via maintainer trees but the maintainers are slack, etc. I need to be more activist in getting these things wrapped up outside the merge window, but they're such a PITA." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (48 commits) mm/vmscan.c: avoid possible deadlock caused by too_many_isolated() vmscan: comment too_many_isolated() mm/kmemleak.c: remove obsolete simple_strtoul mm/memory_hotplug.c: improve comments mm/hugetlb: create hugetlb cgroup file in hugetlb_init mm/mprotect.c: coding-style cleanups Documentation: ABI: /sys/devices/system/node/ slub: drop mutex before deleting sysfs entry memcg: add comments clarifying aspects of cache attribute propagation kmem: add slab-specific documentation about the kmem controller slub: slub-specific propagation changes slab: propagate tunable values memcg: aggregate memcg cache values in slabinfo memcg/sl[au]b: shrink dead caches memcg/sl[au]b: track all the memcg children of a kmem_cache memcg: destroy memcg caches sl[au]b: allocate objects from memcg cache sl[au]b: always get the cache from its page in kmem_cache_free() memcg: skip memcg kmem allocations in specified code regions memcg: infrastructure to match an allocation to the right cache ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fixlet from Guenter Roeck: "Fix fallout from __devexit removal" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (twl4030-madc-hwmon) Fix warning message caused by removal of __devexit
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull tile updates from Chris Metcalf: "These are a smattering of minor changes from Tilera and other folks, mostly in the ptrace area." * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: set CORE_DUMP_USE_REGSET on tile arch/tile: implement arch_ptrace using user_regset on tile arch/tile: implement user_regset interface on tile arch/tile: clean up tile-specific PTRACE_SETOPTIONS arch/tile: provide PT_FLAGS_COMPAT value in pt_regs tile/PCI: use for_each_pci_dev to simplify the code tilegx: remove __init from pci fixup hook
-
Fengguang Wu authored
Neil found that if too_many_isolated() returns true while performing direct reclaim we can end up waiting for other threads to complete their direct reclaim. If those threads are allowed to enter the FS or IO to free memory, but this thread is not, then it is possible that those threads will be waiting on this thread and so we get a circular deadlock. some task enters direct reclaim with GFP_KERNEL => too_many_isolated() false => vmscan and run into dirty pages => pageout() => take some FS lock => fs/block code does GFP_NOIO allocation => enter direct reclaim again => too_many_isolated() true => waiting for others to progress, however the other tasks may be circular waiting for the FS lock.. The fix is to let !__GFP_IO and !__GFP_FS direct reclaims enjoy higher priority than normal ones, by lowering the throttle threshold for the latter. Allowing ~1/8 isolated pages in normal is large enough. For example, for a 1GB LRU list, that's ~128MB isolated pages, or 1k blocked tasks (each isolates 32 4KB pages), or 64 blocked tasks per logical CPU (assuming 16 logical CPUs per NUMA node). So it's not likely some CPU goes idle waiting (when it could make progress) because of this limit: there are much more sleeping reclaim tasks than the number of CPU, so the task may well be blocked by some low level queue/lock anyway. Now !GFP_IOFS reclaims won't be waiting for GFP_IOFS reclaims to progress. They will be blocked only when there are too many concurrent !GFP_IOFS reclaims, however that's very unlikely because the IO-less direct reclaims is able to progress much more faster, and they won't deadlock each other. The threshold is raised high enough for them, so that there can be sufficient parallel progress of !GFP_IOFS reclaims. [akpm@linux-foundation.org: tweak comment] Signed-off-by:NeilBrown <neilb@suse.de> Reviewed-by:
Minchan Kim <minchan.kim@gmail.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Fengguang Wu authored
Comment "Why it's doing so" rather than "What it does" as proposed by Andrew Morton. Signed-off-by:
-
Abhijit Pawar authored
Replace the obsolete simple_strtoul() with kstrtoul(). Signed-off-by:
Abhijit Pawar <abhi.c.pawar@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Tang Chen authored
Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
Jianguo Wu authored
Build kernel with CONFIG_HUGETLBFS=y,CONFIG_HUGETLB_PAGE=y and CONFIG_CGROUP_HUGETLB=y, then specify hugepagesz=xx boot option, system will fail to boot. This failure is caused by following code path: setup_hugepagesz hugetlb_add_hstate hugetlb_cgroup_file_init cgroup_add_cftypes kzalloc <--slab is *not available* yet For this path, slab is not available yet, so memory allocated will be failed, and cause WARN_ON() in hugetlb_cgroup_file_init(). So I move hugetlb_cgroup_file_init() into hugetlb_init(). [akpm@linux-foundation.org: tweak coding-style, remove pointless __init on inlined function] [akpm@linux-foundation.org: fix warning] Signed-off-by:Jianguo Wu <wujianguo@huawei.com> Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by:
Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Andrew Morton authored
A few gremlins have recently crept in. Signed-off-by:
-
Davidlohr Bueso authored
Describe NUMA node sysfs files/attributes. Note that for the specific dates and contacts I couldn't find, I left it as default for Oct 2002 and linux-mm. Signed-off-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Glauber Costa authored
Sasha Levin recently reported a lockdep problem resulting from the new attribute propagation introduced by kmemcg series. In short, slab_mutex will be called from within the sysfs attribute store function. This will create a dependency, that will later be held backwards when a cache is destroyed - since destruction occurs with the slab_mutex held, and then calls in to the sysfs directory removal function. In this patch, I propose to adopt a strategy close to what __kmem_cache_create does before calling sysfs_slab_add, and release the lock before the call to sysfs_slab_remove. This is pretty much the last operation in the kmem_cache_shutdown() path, so we could do better by splitting this and moving this call alone to later on. This will fit nicely when sysfs handling is consistent between all caches, but will look weird now. Lockdep info: ====================================================== [ INFO: possible circular locking dependency detected ] 3.7.0-rc4-next-20121106-sasha-00008-g353b62f #117 Tainted: G W ------------------------------------------------------- trinity-child13/6961 is trying to acquire lock: (s_active#43){++++.+}, at: sysfs_addrm_finish+0x31/0x60 but task is already holding lock: (slab_mutex){+.+.+.}, at: kmem_cache_destroy+0x22/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slab_mutex){+.+.+.}: lock_acquire+0x1aa/0x240 __mutex_lock_common+0x59/0x5a0 mutex_lock_nested+0x3f/0x50 slab_attr_store+0xde/0x110 sysfs_write_file+0xfa/0x150 vfs_write+0xb0/0x180 sys_pwrite64+0x60/0xb0 tracesys+0xe1/0xe6 -> #0 (s_active#43){++++.+}: __lock_acquire+0x14df/0x1ca0 lock_acquire+0x1aa/0x240 sysfs_deactivate+0x122/0x1a0 sysfs_addrm_finish+0x31/0x60 sysfs_remove_dir+0x89/0xd0 kobject_del+0x16/0x40 __kmem_cache_shutdown+0x40/0x60 kmem_cache_destroy+0x40/0xe0 mon_text_release+0x78/0xe0 __fput+0x122/0x2d0 ____fput+0x9/0x10 task_work_run+0xbe/0x100 do_exit+0x432/0xbd0 do_group_exit+0x84/0xd0 get_signal_to_deliver+0x81d/0x930 do_signal+0x3a/0x950 do_notify_resume+0x3e/0x90 int_signal+0x12/0x17 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slab_mutex); lock(s_active#43); lock(slab_mutex); lock(s_active#43); *** DEADLOCK *** 2 locks held by trinity-child13/6961: #0: (mon_lock){+.+.+.}, at: mon_text_release+0x25/0xe0 #1: (slab_mutex){+.+.+.}, at: kmem_cache_destroy+0x22/0xe0 stack backtrace: Pid: 6961, comm: trinity-child13 Tainted: G W 3.7.0-rc4-next-20121106-sasha-00008-g353b62f #117 Call Trace: print_circular_bug+0x1fb/0x20c __lock_acquire+0x14df/0x1ca0 lock_acquire+0x1aa/0x240 sysfs_deactivate+0x122/0x1a0 sysfs_addrm_finish+0x31/0x60 sysfs_remove_dir+0x89/0xd0 kobject_del+0x16/0x40 __kmem_cache_shutdown+0x40/0x60 kmem_cache_destroy+0x40/0xe0 mon_text_release+0x78/0xe0 __fput+0x122/0x2d0 ____fput+0x9/0x10 task_work_run+0xbe/0x100 do_exit+0x432/0xbd0 do_group_exit+0x84/0xd0 get_signal_to_deliver+0x81d/0x930 do_signal+0x3a/0x950 do_notify_resume+0x3e/0x90 int_signal+0x12/0x17 Signed-off-by:Glauber Costa <glommer@parallels.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Glauber Costa authored
This patch clarifies two aspects of cache attribute propagation. First, the expected context for the for_each_memcg_cache macro in memcontrol.h. The usages already in the codebase are safe. In mm/slub.c, it is trivially safe because the lock is acquired right before the loop. In mm/slab.c, it is less so: the lock is acquired by an outer function a few steps back in the stack, so a VM_BUG_ON() is added to make sure it is indeed safe. A comment is also added to detail why we are returning the value of the parent cache and ignoring the children's when we propagate the attributes. Signed-off-by:
-
Glauber Costa authored
Signed-off-by:
-
Glauber Costa authored
SLUB allows us to tune a particular cache behavior with sysfs-based tunables. When creating a new memcg cache copy, we'd like to preserve any tunables the parent cache already had. This can be done by tapping into the store attribute function provided by the allocator. We of course don't need to mess with read-only fields. Since the attributes can have multiple types and are stored internally by sysfs, the best strategy is to issue a ->show() in the root cache, and then ->store() in the memcg cache. The drawback of that, is that sysfs can allocate up to a page in buffering for show(), that we are likely not to need, but also can't guarantee. To avoid always allocating a page for that, we can update the caches at store time with the maximum attribute size ever stored to the root cache. We will then get a buffer big enough to hold it. The corolary to this, is that if no stores happened, nothing will be propagated. It can also happen that a root cache has its tunables updated during normal system operation. In this case, we will propagate the change to all caches that are already active. [akpm@linux-foundation.org: tweak code to avoid __maybe_unused] Signed-off-by:
-
Glauber Costa authored
SLAB allows us to tune a particular cache behavior with tunables. When creating a new memcg cache copy, we'd like to preserve any tunables the parent cache already had. This could be done by an explicit call to do_tune_cpucache() after the cache is created. But this is not very convenient now that the caches are created from common code, since this function is SLAB-specific. Another method of doing that is taking advantage of the fact that do_tune_cpucache() is always called from enable_cpucache(), which is called at cache initialization. We can just preset the values, and then things work as expected. It can also happen that a root cache has its tunables updated during normal system operation. In this case, we will propagate the change to all caches that are already active. This change will require us to move the assignment of root_cache in memcg_params a bit earlier. We need this to be already set - which memcg_kmem_register_cache will do - when we reach __kmem_cache_create() Signed-off-by:
-
