- Apr 28, 2014
-
-
Anton Blanchard authored
module_init should return 0 or a negative errno. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anton Blanchard authored
Bump the boot wrapper BOOT_COMMAND_LINE_SIZE to match the kernel. Signed-off-by:
-
Anton Blanchard authored
I've had a report that the current limit is too small for an automated network based installer. Bump it. Signed-off-by:
-
Anton Blanchard authored
We have two definitions of COMMAND_LINE_SIZE, one for the kernel and one for the boot wrapper. I assume this is so the boot wrapper can be self sufficient and not rely on kernel headers. Having two defines with the same name is confusing, I just updated the wrong one when trying to bump it. Make the boot wrapper define unique by calling it BOOT_COMMAND_LINE_SIZE. Signed-off-by:
-
Cody P Schafer authored
The catalog version number was changed from a be32 (with proceeding 32bits of padding) to a be64, update the code to treat it as a be64 Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
-
Cody P Schafer authored
fixup for "powerpc/perf: Add support for the hv gpci (get performance counter info) interface". Makes the "not enabled" message less awful (and hidden unless debugging). Signed-off-by:
-
Cody P Schafer authored
fixup for "powerpc/perf: Add support for the hv 24x7 interface" Makes the "not enabled" message less awful (and hides it in most cases). Signed-off-by:
-
Aneesh Kumar K.V authored
The if condition check was based on a draft ISA doc. Remove the same. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
Signed-off-by:
-
Anton Blanchard authored
We have two copies of code that creates an OPAL sg list. Consolidate these into a common set of helpers and fix the endian issues. The flash interface embedded a version number in the num_entries field, whereas the dump interface did did not. Since versioning wasn't added to the flash interface and it is impossible to add this in a backwards compatible way, just remove it. Signed-off-by:
-
Anton Blanchard authored
Fix little endian issues with the OPAL error log code. Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
The bitmap in opal_poll_events and opal_handle_interrupt is big endian, so we need to byteswap it on little endian builds. Signed-off-by:
-
Anton Blanchard authored
We had some duplication of the internal OPAL functions. Signed-off-by:
-
Anton Blanchard authored
Using size_t in our APIs is asking for trouble, especially when some OPAL calls use size_t pointers. Signed-off-by:
-
Wei Yang authored
On PowerNV platform, we are holding an unnecessary refcount on a pci_dev, which leads to the pci_dev is not destroyed when hotplugging a pci device. This patch release the unnecessary refcount. Signed-off-by:
Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by:
-
Wei Yang authored
During the EEH hotplug event, iommu_add_device() will be invoked three times and two of them will trigger warning or error. The three times to invoke the iommu_add_device() are: pci_device_add ... set_iommu_table_base_and_group <- 1st time, fail device_add ... tce_iommu_bus_notifier <- 2nd time, succees pcibios_add_pci_devices ... pcibios_setup_bus_devices <- 3rd time, re-attach The first time fails, since the dev->kobj->sd is not initialized. The dev->kobj->sd is initialized in device_add(). The third time's warning is triggered by the re-attach of the iommu_group. After applying this patch, the error iommu_tce: 0003:05:00.0 has not been added, ret=-14 and the warning [ 204.123609] ------------[ cut here ]------------ [ 204.123645] WARNING: at arch/powerpc/kernel/iommu.c:1125 [ 204.123680] Modules linked in: xt_CHECKSUM nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT bnep bluetooth 6lowpan_iphc rfkill xt_conntrack ebtable_nat ebtable_broute bridge stp llc mlx4_ib ib_sa ib_mad ib_core ib_addr ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw bnx2x tg3 mlx4_core nfsd ptp mdio ses libcrc32c nfs_acl enclosure be2net pps_core shpchp lockd kvm uinput sunrpc binfmt_misc lpfc scsi_transport_fc ipr scsi_tgt [ 204.124356] CPU: 18 PID: 650 Comm: eehd Not tainted 3.14.0-rc5yw+ #102 [ 204.124400] task: c0000027ed485670 ti: c0000027ed50c000 task.ti: c0000027ed50c000 [ 204.124453] NIP: c00000000003cf80 LR: c00000000006c648 CTR: c00000000006c5c0 [ 204.124506] REGS: c0000027ed50f440 TRAP: 0700 Not tainted (3.14.0-rc5yw+) [ 204.124558] MSR: 9000000000029032 <SF,HV,EE,ME,IR,DR,RI> CR: 88008084 XER: 20000000 [ 204.124682] CFAR: c00000000006c644 SOFTE: 1 GPR00: c00000000006c648 c0000027ed50f6c0 c000000001398380 c0000027ec260300 GPR04: c0000027ea92c000 c00000000006ad00 c0000000016e41b0 0000000000000110 GPR08: c0000000012cd4c0 0000000000000001 c0000027ec2602ff 0000000000000062 GPR12: 0000000028008084 c00000000fdca200 c0000000000d1d90 c0000027ec281a80 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 GPR24: 000000005342697b 0000000000002906 c000001fe6ac9800 c000001fe6ac9800 GPR28: 0000000000000000 c0000000016e3a80 c0000027ea92c090 c0000027ea92c000 [ 204.125353] NIP [c00000000003cf80] .iommu_add_device+0x30/0x1f0 [ 204.125399] LR [c00000000006c648] .pnv_pci_ioda_dma_dev_setup+0x88/0xb0 [ 204.125443] Call Trace: [ 204.125464] [c0000027ed50f6c0] [c0000027ed50f750] 0xc0000027ed50f750 (unreliable) [ 204.125526] [c0000027ed50f750] [c00000000006c648] .pnv_pci_ioda_dma_dev_setup+0x88/0xb0 [ 204.125588] [c0000027ed50f7d0] [c000000000069cc8] .pnv_pci_dma_dev_setup+0x78/0x340 [ 204.125650] [c0000027ed50f870] [c000000000044408] .pcibios_setup_device+0x88/0x2f0 [ 204.125712] [c0000027ed50f940] [c000000000046040] .pcibios_setup_bus_devices+0x60/0xd0 [ 204.125774] [c0000027ed50f9c0] [c000000000043acc] .pcibios_add_pci_devices+0xdc/0x1c0 [ 204.125837] [c0000027ed50fa50] [c00000000086f970] .eeh_reset_device+0x36c/0x4f0 [ 204.125939] [c0000027ed50fb20] [c00000000003a2d8] .eeh_handle_normal_event+0x448/0x480 [ 204.126068] [c0000027ed50fbc0] [c00000000003a35c] .eeh_handle_event+0x4c/0x340 [ 204.126192] [c0000027ed50fc80] [c00000000003a74c] .eeh_event_handler+0xfc/0x1b0 [ 204.126319] [c0000027ed50fd30] [c0000000000d1ea0] .kthread+0x110/0x130 [ 204.126430] [c0000027ed50fe30] [c00000000000a460] .ret_from_kernel_thread+0x5c/0x7c [ 204.126556] Instruction dump: [ 204.126610] 7c0802a6 fba1ffe8 fbc1fff0 fbe1fff8 f8010010 f821ff71 7c7e1b78 60000000 [ 204.126787] 60000000 e87e0298 3143ffff 7d2a1910 <0b090000> 2fa90000 40de00c8 ebfe0218 [ 204.126966] ---[ end trace 6e7aefd80add2973 ]--- are cleared. This patch removes iommu_add_device() in pnv_pci_ioda_dma_dev_setup(), which revert part of the change in commit d905c5df (PPC: POWERNV: move iommu_add_device earlier). Signed-off-by: -
Anton Blanchard authored
With this patch I was able to update firmware on an LE kernel. Signed-off-by:
-
Benjamin Herrenschmidt authored
We have a subtle race when sending CPUs back to OPAL on kexec. We mark them as "in real mode" right before we send them down. Once we've booted the new kernel, it might try to call opal_reinit_cpus() to change endianness, and that requires all CPUs to be spinning inside OPAL. However there is no synchronization here and we've observed cases where the returning CPUs hadn't established their new state inside OPAL before opal_reinit_cpus() is called, causing it to fail. The proper fix is to actually wait for them to go down all the way from the kexec'ing kernel. Signed-off-by: -
Joel Stanley authored
The size of the sysparam sysfs files is determined from the device tree at boot. However the buffer is hard coded to 64 bytes. If we encounter a parameter that is larger than 64, or miss-parse the device tree, the buffer will overflow when reading or writing to the parameter. Check it at discovery time, and if the parameter is too large, do not create a sysfs entry for it. Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Joel Stanley authored
Signed-off-by: -
Joel Stanley authored
The sysparam code currently uses the userspace supplied number of bytes when memcpy()ing in to a local 64-byte buffer. Limit the maximum number of bytes by the size of the buffer. Signed-off-by: -
Joel Stanley authored
The OPAL calls are returning int64_t values, which the sysparam code stores in an int, and the sysfs callback returns ssize_t. Make code a easier to read by consistently using ssize_t. Signed-off-by:
-
Joel Stanley authored
When a sysparam query in OPAL returned a negative value (error code), sysfs would spew out a decent chunk of memory; almost 64K more than expected. This was traced to a sign/unsigned mix up in the OPAL sysparam sysfs code at sys_param_show. The return value of sys_param_show is a ssize_t, calculated using return ret ? ret : attr->param_size; Alan Modra explains: "attr->param_size" is an unsigned int, "ret" an int, so the overall expression has type unsigned int. Result is that ret is cast to unsigned int before being cast to ssize_t. Instead of using the ternary operator, set ret to the param_size if an error is not detected. The same bug exists in the sysfs write callback; this patch fixes it in the same way. A note on debugging this next time: on my system gcc will warn about this if compiled with -Wsign-compare, which is not enabled by -Wall, only -Wextra. Signed-off-by:
-
Li Zhong authored
commit 41dd03a9 may cause Oops in rtas_stop_self(). The reason is that the rtas_args was moved into stack space. For a box with more that 4GB RAM, the stack could easily be outside 32bit range, but RTAS is 32bit. So the patch moves rtas_args away from stack by adding static before it. Signed-off-by:
Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by:
-
Jeff Mahoney authored
Commit aac416fc (lkdtm: flush icache and report actions) calls flush_icache_range from a module. It's exported on most architectures that implement it, but not on powerpc. This patch exports it to fix the module link failure. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
- Apr 21, 2014
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Back from long weekend here in India and now the time to send fixes for slave dmaengine. - Dan's fix of sirf xlate code - Jean's fix for timberland - edma fixes by Sekhar for SG handling and Yuan for changing init call" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: fix eDMA driver as a subsys_initcall dmaengine: sirf: off by one in of_dma_sirfsoc_xlate() platform: Fix timberdale dependencies dma: edma: fix incorrect SG list handling -
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: "Fixes for regressions: - fix wrong IOMMU enumeration causing some SCSI device drivers initialization failures - ARM-SMMU fixes for a panic condition and a wrong return value" * tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte iommu/arm-smmu: Return 0 on unmap failure iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges iommu/vt-d: fix memory leakage caused by commit ea8ea460 -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Ingo Molnar: "Three small tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Improve error reporting perf tools: Adjust symbols in VDSO perf kvm: Fix 'Min time' counting in report command
-
- Apr 20, 2014
-
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: User visible changes: * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev) * Improve error reporting for record session failure (Adrien BAK) * Fix 'Min time' counting in report command (Alexander Yarygin) Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Adrien BAK authored
In the current version, when using perf record, if something goes wrong in tools/perf/builtin-record.c:375 session = perf_session__new(file, false, NULL); The error message: "Not enough memory for reading per file header" is issued. This error message seems to be outdated and is not very helpful. This patch proposes to replace this error message by "Perf session creation failed" I believe this issue has been brought to lkml: https://lkml.org/lkml/2014/2/24/458 although this patch only tackles a (small) part of the issue. Additionnaly, this patch improves error reporting in tools/perf/util/data.c open_file_write. Currently, if the call to open fails, the user is unaware of it. This patch logs the error, before returning the error code to the caller. Reported-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Adrien BAK <adrien.bak@metascale.org> Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast [ Reorganize the changelog into paragraphs ] [ Added empty line after fd declaration in open_file_write ] Signed-off-by:
-
Vladimir Nikulichev authored
pert-report doesn't resolve function names in VDSO: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% 0x7fff6b1fe861 __gettimeofday ACE_OS::gettimeofday() ... In this case symbol values should be adjusted the same way as for executables, relocatable objects and prelinked libraries. After fix: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% __vdso_gettimeofday __gettimeofday ACE_OS::gettimeofday() Signed-off-by:Vladimir Nikulichev <nvs@tbricks.com> Tested-by:
Namhyung Kim <namhyung@kernel.org> Reviewed-by:
Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvs Signed-off-by:
-
Alexander Yarygin authored
Every event in the perf-kvm has a 'stats' structure, which contains max/min/average/etc times of handling this event. The problem is that the 'perf-kvm stat report' command always shows that 'min time' is 0us for every event. Example: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 0us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 0us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 0us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 0us 44us 16.49us ( +- 38.20% ) [..] This happens because the 'stats' structure is not initialized and stats->min equals to 0. Lets initialize the structure for every event after its allocation using init_stats() function. This initializes stats->min to -1 and makes 'Min time' statistics counting work: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 6us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 7us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 1us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 1us 44us 16.49us ( +- 38.20% ) [..] Signed-off-by:Alexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com [ Fixing the perf examples changelog output ] Signed-off-by:
-
Eric Dumazet authored
A va_list needs to be copied in case it needs to be used twice. Thanks to Hugh for debugging this issue, leading to various panics. Tested: lpq84:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern 'produce_core' is simply : main() { *(int *)0 = 1;} lpq84:~# ./produce_core Segmentation fault (core dumped) lpq84:~# dmesg | tail -1 [ 614.352947] Core dump to |/foobar12345 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 (null) pipe failed Notice the last argument was replaced by a NULL (we were lucky enough to not crash, but do not try this on your production machine !) After fix : lpq83:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern lpq83:~# ./produce_core Segmentation fault lpq83:~# dmesg | tail -1 [ 740.800441] Core dump to |/foobar12345 lpq83 lpq83 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "This fixes the preemption-count imbalance crash reported by Owen Kibel" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix CMCI preemption bugs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: - a SCHED_DEADLINE task selection fix - a sched/numa related lockdep splat fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Check for stop task appearance when balancing happens sched/numa: Fix task_numa_free() lockdep splat
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Two kernel side fixes: - an Intel uncore PMU driver potential crash fix - a kprobes/perf-call-graph interaction fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMU kprobes/x86: Fix page-fault handling logic
-
