- Dec 11, 2023
-
-
Krzysztof Kozlowski authored
Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) RX macro codec, which looks like compatible with earlier SM8550. Cc: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Rob Herring <robh@kernel.org> Link: https://msgid.link/r/20231129113014.38837-1-krzysztof.kozlowski@linaro.org Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Krzysztof Kozlowski authored
Add support four channel streams. Map channel 3 and 4 to left/right surround ("quad(side)" from ffmpeg standard channel list) to match what is in qdsp6/q6dsp-common.c driver. Signed-off-by: -
Krzysztof Kozlowski authored
q6apm.h header already defines channel mapping values, so drop duplicated devices from audioreach.h. Signed-off-by:
-
Krzysztof Kozlowski authored
Move code assigning channel mapping values to a common helper function. This simplifies three out of four cases, with the last case using incompatible type (uint16_t array instead of uint8_t array). Signed-off-by:
-
- Dec 10, 2023
-
-
Linus Walleij authored
The GPIO descriptor conversion patch left an unitialized ret behind by mistake, fix it by getting rid of the variable altogether. Fixes: 10a366f3 ("ASoC: wm1250-ev1: Convert to GPIO descriptors") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312090953.DiUo3mue-lkp@intel.com/ Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231209-descriptors-sound-wlf-v1-1-5b885ce43ae1@linaro.org Signed-off-by:
-
- Dec 09, 2023
-
-
Mark Brown authored
Merge series from Linus Walleij <linus.walleij@linaro.org>: This converts the remaining Wolfson ASoC codecs to use GPIO descriptors. These Wolfson codecs are mostly used with different Samsung S3C (especially Cragganmore 6410) board files, so the in-tree users are fixed up in the process.
-
- Dec 08, 2023
-
-
Linus Walleij authored
This converts the WM8996 codec to use GPIO descriptors, an a similar way to WM5100. The driver is instantiating a GPIO chip named wm8996, and we get rid of the base address for the GPIO chip from the platform data and just use dynamic numbering. Move base and ngpio into the static gpio_chip template. Fix up the only in-tree user which is the Cragganmore 6410 module. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-5-c4dab6f521ec@linaro.org Signed-off-by:
-
Linus Walleij authored
This converts the WM5100 codec to use GPIO descriptors, a pretty straight-forward conversion with the following peculiarities: - The driver is instantiating a GPIO chip named wm5100, and the headphone polarity detection GPIO is lifted from there. We add this to the GPIO descriptor table as well, and we can then get rid of also the base address for the GPIO chip from the platform data and just use dynamic numbering. - Fix up the only in-tree user which is the Cragganmore 6410 module. Signed-off-by:
-
Linus Walleij authored
This converts the WM2200 codec to use GPIO descriptors. This is a pretty straight-forward conversion, and it also switches over the single in-tree user in the S3C Cragganmore module for S3C 6410. This coded does not seem to get selected or be selectable through Kconfig, I had to hack another soundcard Kconfig entry to select it for compile tests. Signed-off-by:
-
Linus Walleij authored
This converts the WM1250-EV1 codec to use GPIO descriptors. It turns out that the platform data was only used to pass some global GPIO numbers from a board file, so we get rid of this and also switch over the single in-tree user in the S3C Cragganmore module for S3C 6410. The driver obtains two GPIO lines named OSR and master and just pull them low, we leave this behaviour as it was. Signed-off-by:
-
Linus Walleij authored
This converts the WM0010 codec to use GPIO descriptors. It's a pretty straight-forward conversion also switching over the single in-tree user in the S3C Cragganmore module for S3C 6410. Signed-off-by:
-
- Dec 07, 2023
-
-
Dan Carpenter authored
The > comparison should be >= to avoid writing one element beyond the end of the dai_link->ch_maps[] array. The dai_link->ch_maps[] array is allocated in graph_parse_node_multi() and it has "nm_max" elements. Fixes: e2de6808 ("ASoC: audio-graph-card2: add CPU:Codec = N:M support") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/1032216f-902f-48f9-aa49-9d5ece8e87f2@moroto.mountain Signed-off-by:
-
Vijendar Mukunda authored
Modify acp config flag read logic from ACP v7.0 onwards. Instead of reading from DMI table match entry, read the config flag value from BIOS ACPI table. This will remove updating DMI table when new platform support is added. Use FLAG_AMD_LEGACY_ONLY_DMIC flag as default one. Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20231207045505.1519151-1-Vijendar.Mukunda@amd.com Signed-off-by:
-
Peter Ujfalusi authored
The current code flow is: 1. snd_hdac_device_register() 2. set parameters needed by the hdac driver 3. request_codec_module() the hdac driver is probed at this point During boot the codec drivers are not loaded when the hdac device is registered, it is going to be probed later when loading the codec module, which point the parameters are set. On module remove/insert rmmod snd_sof_pci_intel_tgl modprobe snd_sof_pci_intel_tgl The codec module remains loaded and the driver will be probed when the hdac device is created right away, before the parameters for the driver has been configured: 1. snd_hdac_device_register() the hdac driver is probed at this point 2. set parameters needed by the hdac driver 3. request_codec_module() will be a NOP as the module is already loaded Move the snd_hdac_device_register() later, to be done right before requesting the codec module to make sure that the parameters are all set before the device is created: 1. set parameters needed by the hdac driver 2. snd_hdac_device_register() 3. request_codec_module() This way at the hdac driver probe all parameters will be set in all cases. Link: https://github.com/thesofproject/linux/issues/4731 Fixes: a0575b4a ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com Signed-off-by:
-
Venkata Prasad Potturu authored
Some platforms doesn't have reference mclk pin to codec, so set bclk as a clk source for rt5682s codec pll in tdm mode. Signed-off-by:
Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://lore.kernel.org/r/20231206110620.1695591-7-venkataprasad.potturu@amd.com Signed-off-by:
-
Venkata Prasad Potturu authored
Some platforms doesn't have reference mclk pin to codec, so set bclk as a clk source for rt5682s codec pll in tdm mode. Signed-off-by:
-
Venkata Prasad Potturu authored
Enable dpcm_capture for amplifier codec MAX98388 for reference stream capture in smart amplifier case. Signed-off-by:
-
Venkata Prasad Potturu authored
Add i2s bt support for sof-nau8821-max sound card. Signed-off-by:
-
Venkata Prasad Potturu authored
Add sof_bt cpu id and create dailink for i2s bt instance in acp common machine driver. Signed-off-by:
-
Venkata Prasad Potturu authored
Remove extra dmi_product_family entry in amd config entry table. Signed-off-by:
-
Venkata Prasad Potturu authored
Add condition check for acp config flag to load legacy driver only. Signed-off-by:
-
Venkata Prasad Potturu authored
Add sys_vendor and product_name dmi entries for acp5x platform. Signed-off-by:
-
- Dec 06, 2023
-
-
Fabio Estevam authored
Unlike i.MX8MP, i.MX93 has two XCVR interrupts. Describe the two interrupts for the i.MX93 to fix the following dt-schema warning: imx93-11x11-evk.dtb: xcvr@42680000: interrupts: [[0, 203, 4], [0, 204, 4]] is too long from schema $id: http://devicetree.org/schemas/sound/fsl,xcvr.yaml# Signed-off-by:
Fabio Estevam <festevam@denx.de> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231206113047.2240055-1-festevam@gmail.com Signed-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Header alignment with firmware, addition of new token and partial match filters.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Minor cleanups for machine drivers.
-
- Dec 05, 2023
-
-
Richard Fitzgerald authored
Hookup the CS35L56 DAPM_OUTPUT widgets to a DAPM_SPK widget so that there is a complete logical path to a speaker. There is no particular reason to use multiple speaker widgets. The CS35L56 are designed to work together as a set so they have all been connected to a single speaker widget. Instead of a hardcoded list of codec widget names, the code walks through all the codecs on the dailink and for every cs35l56 it uses its name prefix to construct the source end of the route. This adds a small amount of overhead during probe but has the benefit that it isn't dependent on every system using the same prefixes. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Acked-by:
-
Rander Wang authored
Driver uses get and set ops to change the power state of dsp core. Closes: https://github.com/thesofproject/sof/issues/8478 Signed-off-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err_probe error message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
-
Chao Song authored
The RT722 SDCA codec supports 3 data lanes, lane_control_support property has to be set to use additional two lanes. Reviewed-by:
Jack Yu <jack580304@gmail.com> Reviewed-by:
Chao Song <chao.song@linux.intel.com> Signed-off-by:
-
Curtis Malainey authored
Buffer flags have been in firmware for ages but were never fully implemented in the topology/kernel system. This commit finishes off the implementation. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
Baofeng Tian authored
sof header file requires these struct with 4 byte aligned, so add same alignment in sof driver definition. Signed-off-by:
Baofeng Tian <baofeng.tian@intel.com> Reviewed-by:
-
Baofeng Tian authored
Add missed definition and align variable names with sof topology header file. Signed-off-by:
-
Bard Liao authored
We use partial match for connecting DAI link and DAI widget. We need to use partial match for disconnecting, too. Fixes: fe887887 ("ASoC: SOF: topology: Use partial match for connecting DAI link and DAI widget") Reviewed-by:
-
Bard Liao authored
'if (!playback)' will not work if the dai is only on capture dai link or is on more than one playback dai links. Check 'if (ctx->headset_codec_dev)' instead. Reviewed-by:
-
Bard Liao authored
sof_sdw_rt_sdca_jack_exit() are used by different codecs, and some of them use the same dai name. For example, rt712 and rt713 both use "rt712-sdca-aif1" and sof_sdw_rt_sdca_jack_exit(). As a result, sof_sdw_rt_sdca_jack_exit() will be called twice by mc_dailink_exit_loop(). Set ctx->headset_codec_dev = NULL; after put_device(ctx->headset_codec_dev); to avoid ctx->headset_codec_dev being put twice. Fixes: 5360c670 ("ASoC: Intel: sof_sdw: add rt712 support") Reviewed-by:
-
Brent Lu authored
The drv_name in enumeration table for ALC5682I-VS codec does not match the board id string in machine driver. Modify the entry of "10EC5682" to enumerate "RTL5682" as well and remove invalid entry. Fixes: 88b4d77d ("ASoC: Intel: glk_rt5682_max98357a: support ALC5682I-VS codec") Reported-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Brent Lu authored
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "rpl_nau8825_def" board to reduce the number of rpl board configs. Reviewed-by:
-
Brent Lu authored
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "adl_nau8825_def" board to reduce the number of adl board configs. Reviewed-by:
-
Bard Liao authored
This is a test configuration for UpExtreme with Cirrus Logic CS35L56-EIGHT-C board. The codec layout is configured as: - Link3: CS42L43 Jack - Link0: 2x CS35L56 Speaker (amps 1 and 2) - Link1: 2x CS35L56 Speaker (amps 7 and 8) Signed-off-by: -
Mark Brown authored
Merge series from Hans de Goede <hdegoede@redhat.com>: This takes some of the work done to auto-configure quirks/routing for ESS83xx codecs by getting the info from ACPI from: https://github.com/thesofproject/linux/pull/4112 And then builds on top of this to add auto-configuration to the bytcht_es8316 board driver. Note compared to the pull-request, which deals with the ES8336, this series deals with the ES8316 (for which I have several devices to test on) and this moves handling of the _DSM from the codec driver to the board driver since with the ES8316 the board driver takes care of setting up various routes for things like the mic and speakers. After this series audio now works properly on a CHT Chuwi Hi12 tablet without needing to add an extra quirk for that model. This has also been tested on the following devices, where things are unchanged from before (the ACPI autoconfiguration gives the same results as the old defaults) : Onda V80 plus (CHT) GP-electronic T701 (BYT) I also tested this on a Nanote UMPC-01, here the _DSM result for PLATFORM_SPK_TYPE_ARG wrongly returns 1 (mono) while the device actually has 2 speakers, so this model needs to keep its DMI quirk. I don't have an IRBIS NB41 nor a TECLAST X98 Plus II, so the DMI quirks for those are left in place too on a better safe then sorry basis.
-
