- May 17, 2011
-
-
Stephen M. Cameron authored
Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
James Bottomley <jbottomley@parallels.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
This is to avoid the usual two or three messages about the command timing out. We're obviously not waiting long enough. Signed-off-by:
-
Stephen M. Cameron authored
Detect failure of controller reset by noticing if the 32 bytes of "driver version" we store on the hardware in the config table fail to get zeroed out. Previously we noticed if the controller did not transition to "simple mode", but this did not detect reset failure if the controller was already in simple mode prior to the reset attempt (e.g. due to module parameter hpsa_simple_mode=1). Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
This is to ensure the board interrupts are really off when these functions return. Signed-off-by:
-
Stephen M. Cameron authored
Apparently we've been doin it rong for a decade, but only lately do we run into problems. Signed-off-by:
-
Borislav Petkov authored
Shut up drivers/message/fusion/mptsas.c: In function 'mptsas_event_process': drivers/message/fusion/mptsas.c:5015: warning: unused variable 'log_info' for configs with CONFIG_SCSI_MPT2SAS_LOGGING unset. Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Acked-by:
"Desai, Kashyap" <Kashyap.Desai@lsi.com> Signed-off-by:
-
Kiran Patil authored
This is a comprehensive patch for FC-FC4 provider. tcm_fc is a FC-FC4 provider which glues target core (TCM) with Fiber channel library (libfc). tcm_fc uses existing FC4 provider hooks from Fiber channel library. This Fiber channel library is used by FCoE (transport - FC over Ethernet) protocol driver as well. Combination of modules such as Fiber channel library, tcm_fc, TCM target core, and FCoE protocol driver enables functional FCoE target. This patch includes initial commit for tcm_fc plus additional enhancement, bug fixes. This tcm_fc module essentially contains 3 entry points such as "prli", "prlo", "recv". When process login request (ELS_PRLI) request is received, Fiber channel library (libfc) module calls passive providers (FC-FC4, tcm_fc) (if any registered) "prli" function. Likewise when LOGO request is received, "prlo" function of passive provider is invoked by libfc. For all other request (e.g. any read/write, task management, LUN inquiry commands), "recv" function of passiver provider is invoked by libfc. Those passive providers "prli, prlo, recv" functions interact with TCM target core for requested operation. This module was primarily developed by "Joe Eykholt" and there were significant contributions from the people listed under signed-off. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
Kiran Patil <kiran.patil@intel.com> Acked-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
- May 02, 2011
-
-
Jayamohan Kallickal authored
Bump version. Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Jayamohan Kallickal authored
This patch fixes a bug where proper queue id's were not passed to chip for cleanup. Signed-off-by:
-
Jayamohan Kallickal authored
This patch fixes a bug where the interrupts were not rearmed if the Interrupt Mask was enabled. This patch checks for Interrupt mask enabled and still rearms interrupt generation even if the Interrupt mask was enabled Signed-off-by:
-
Tomas Henzl authored
The code currently computes an offset into a dma_alloc_coherent() area on the assumption that the alignment is imprecise. In fact, the API guarantees PAGE_SIZE alignment, so the offset calculation is always zero: remove it. [jejb: make description actually descriptive] Signed-off-by:
Tomas henzl <thenzl@redhat.com> Acked-by:
Nick <Cheng<nick.cheng@areca.com.tw> Signed-off-by:
-
Tomas Henzl authored
I removed outer loops in ...wait_msgint_ready the sleeptime and retrycount are in fact never changed so I changed them into defines. In arcmsr_flush_hba_cache is a loop removed, which printed the same printk 100 times, one line in log is enough I think. The arcmsr_sleep_for_bus_reset has lost a functionality with the latest patches, The only thing the function does is a long sleep, so it's replaced with a ssleep. [jejb: checkpatch fixes] Signed-off-by:
Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by:
-
Vasu Dev authored
Use fc_exch_mgr_list_clone to setup em for npiv port. Also remove redundant vport and lport initializations. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Acked-by:
Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by:
-
Jeff Mahoney authored
On systems with very large numbers (> 1600 or so) of SCSI devices, cat /proc/scsi/scsi ends up failing with -ENOMEM. This is due to the show routine simply iterating over all of the devices with bus_for_each_dev(), and trying to dump all of them into the buffer at the same time. On my test system (using scsi_debug with 4064 devices), the output ends up being ~ 632k, far more than kmalloc will typically allow. This patch defines its own seq_file opreations to iterate over the scsi devices.The result is that each show() operation only dumps ~ 180 bytes into the buffer at a time so we don't run out of memory. If the "Attached devices" header isn't required, we can dump the sfile->private bit completely. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
Bump the driver version. Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by:
-
Brian King authored
This patch fixes an issue seen where an event occurs which causes the ibmvscsi driver to reset its CRQ. Upon re-registering its CRQ, it receives H_CLOSED, indicating the Virtual I/O Server is not yet ready to receive commands. This resulted in the ibmvscsi driver essentially offlining the adapter and not recovering. The fix is to re-enable our interrupt so that when the Virtual I/O server is ready and sends a CRQ init, we will be able to receive it and resume initialization of the VSCSI adapter. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
Currently the size of the dump generated by the driver is limited in 4MB, which is insufficient to gather much useful data from the new 64 bit adapters. This patch makes the needed changes to increase the dump limit for the 64 bit adapters to 32MB, or even to a bigger value in the future, but keeping the current limitations for the legacy 32 bit adapters. Signed-off-by:
-
Xiangliang Yu authored
1. Add support for Task collector mode. 2. Fixed relative collector mode bug: - I/O failed when disks is on two ports - system hang when hotplug disk - system hang when unplug disk during run IO 3. Unlock ap->lock within .lldd_execute_task for direct mode to improve performance Signed-off-by:
Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by:
-
Xiangliang Yu authored
This is support for Marvell 88SE9445/88SE9485 SAS/SATA HBA, which is based on Marvell 88SE9480. Signed-off-by:
-
Martin George authored
The SCSI ALUA handler currently fails to attach to devices reporting an UNAVAILABLE/OFFLINE AAS. But given that an UNAVAILABLE/OFFLINE AAS can transition to other states like ACTIVE/OPTIMIZED, ACTIVE/NON-OPTIMIZED, etc. as per SPC4, this ALUA handler behavior should be rectified so as to attach to devices which also report an UNAVAILABLE/OFFLINE AAS. Signed-off-by:
Martin George <marting@netapp.com> Reviewed-by:
-
Kashyap, Desai authored
Signed-off-by:
-
Kashyap, Desai authored
Adding support for inline data padding for TAPE drive when running U320. [jejb: whitespace fixes] Signed-off-by:
-
Kashyap, Desai authored
Remove debug print from mptscsih_qcmd function call. This debug print cause flood of prints and difficult to debug other issues. Signed-off-by:
-
Nithin Nayak Sujir authored
FW may take more time cleaning up IOs issued to multiple targets. Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
-
Nithin Nayak Sujir authored
Use MISC_DBG instead. Signed-off-by:
-
Nithin Nayak Sujir authored
If the session is not ready yet, we ask the SCSI-ml to retry. However, if the session is just uploaded, we should not retry, but instead call scsi_done to fail the IO. Signed-off-by:
-
Nithin Nayak Sujir authored
Prematurely decrementing the reference may lead to cmd_mgr becoming NULL with the cmds are still active. Signed-off-by:
-
Nithin Nayak Sujir authored
Creating and destroying fcoe interface in a tight loop leads to a system deadlock with the following call traces: Call Trace: [<ffffffff814f4b3d>] schedule_timeout+0x1fd/0x2c0 [<ffffffff814f469f>] ? wait_for_common+0x4f/0x190 [<ffffffff814f469f>] ? wait_for_common+0x4f/0x190 [<ffffffff814f4737>] wait_for_common+0xe7/0x190 [<ffffffff81042fa0>] ? default_wake_function+0x0/0x20 [<ffffffff81082c2d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff814f48bd>] wait_for_completion+0x1d/0x20 [<ffffffff81066d90>] flush_workqueue+0x290/0x5f0 [<ffffffff81066b00>] ? flush_workqueue+0x0/0x5f0 [<ffffffff81067148>] destroy_workqueue+0x38/0x340 [<ffffffffa0260289>] fc_remove_host+0x1b9/0x1f0 [scsi_transport_fc] [<ffffffffa02ed195>] bnx2fc_if_destroy+0xc5/0x1f0 [bnx2fc] [<ffffffffa02ed33a>] bnx2fc_destroy+0x7a/0x100 [bnx2fc] [<ffffffffa02c789b>] fcoe_transport_destroy+0x9b/0x1b0 [libfcoe] [<ffffffff81069ec2>] param_attr_store+0x52/0x80 [<ffffffff81069976>] module_attr_store+0x26/0x30 [<ffffffff8119e726>] sysfs_write_file+0xe6/0x170 [<ffffffff81134710>] vfs_write+0xd0/0x1a0 [<ffffffff811348e4>] sys_write+0x54/0xa0 [<ffffffff81002e02>] system_call_fastpath+0x16/0x1b Call Trace: [<ffffffff81074865>] async_synchronize_cookie_domain+0x75/0x120 [<ffffffff8106caa0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff81074925>] async_synchronize_cookie+0x15/0x20 [<ffffffff8107494c>] async_synchronize_full+0x1c/0x40 [<ffffffffa0057466>] sd_remove+0x36/0xc0 [sd_mod] [<ffffffff81358a75>] __device_release_driver+0x75/0xe0 [<ffffffff81358bef>] device_release_driver+0x2f/0x50 [<ffffffff81357aee>] bus_remove_device+0xbe/0x120 [<ffffffff813553ef>] device_del+0x12f/0x1e0 [<ffffffff8137454d>] __scsi_remove_device+0xbd/0xc0 [<ffffffff81374585>] scsi_remove_device+0x35/0x50 [<ffffffff813746a7>] __scsi_remove_target+0xe7/0x110 [<ffffffff81374730>] ? __remove_child+0x0/0x30 [<ffffffff81374753>] __remove_child+0x23/0x30 [<ffffffff81354a2c>] device_for_each_child+0x4c/0x80 [<ffffffff81374703>] scsi_remove_target+0x33/0x60 [<ffffffffa02622c6>] fc_starget_delete+0x26/0x30 [scsi_transport_fc] [<ffffffffa026271a>] fc_rport_final_delete+0xaa/0x200 [scsi_transport_fc] [<ffffffff8106585a>] process_one_work+0x1aa/0x540 [<ffffffff810657eb>] ? process_one_work+0x13b/0x540 [<ffffffffa0262670>] ? fc_rport_final_delete+0x0/0x200 [scsi_transport_fc] [<ffffffff81067ac9>] worker_thread+0x179/0x410 [<ffffffff81067950>] ? worker_thread+0x0/0x410 [<ffffffff8106c546>] kthread+0xb6/0xc0 [<ffffffff8103879b>] ? finish_task_switch+0x4b/0xe0 [<ffffffff81003ca4>] kernel_thread_helper+0x4/0x10 [<ffffffff814f7994>] ? restore_args+0x0/0x30 [<ffffffff8106c490>] ? kthread+0x0/0xc0 [<ffffffff81003ca0>] ? kernel_thread_helper+0x0/0x10 fc_remove_host() waits for flushing the workqueue, but it is stuck at flushing the first work. The first work doesnt complete, because it is waiting for async layer to complete the IOs. The async layer cannot complete the IO as the terminate_rport_io for the second work was not called, which will be called only when the first work completes. Hence the deadlock. To resolve this deadlock, the workqueue allocation has been modified from create_singlethread_workqueue() to alloc_workqueue(). In addition, fc_terminate_rport_io() should be called before the scsi_flush_work() to avoid the similar deadlock as above. scsi fc alloc queue. move terminate rport io before flush Signed-off-by:
-
James Smart authored
Update driver version to 8.3.22 Signed-off-by:
Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
- Fixed the mixed declarations and codes which violate ISO C90 (declarations in subsections that assign at declaration) - Add BSG data transfer size protection in mailbox command pass-through path - Invoke BSG job_done while holding spinlock to fix deadlock - Added support for checking SLI_CONFIG subcommands - Fixed bug in BSG mailbox size check to non-embedded external buffer Signed-off-by:
-
James Smart authored
Fixes related to new hardware - Restrict driver to look at BAR2 or BAR4 only for if_type 0. - Allow SLI4 with FCOE_MODE not set for new SLI4 FC adapters. - Add Temporary RPI field to the ELS request WQE. - Do not override CT field in issue_els_flogi for SLI4 IF type 2 - For RQ_CREATE_V2 mbx cmd: fill in the rqe_size and page_size for RQ_CREATE. Signed-off-by:
-
James Smart authored
Miscellaneous fixes - Do not limit RPI Count to a minimum of 64 - Fix FCFI incorrect on received unsolicited frames. - Save the FCFI returned in the REG_FCFI mailbox command if it was successful. - Fixed Vports not sending FDISC after lips. - Align based on the SLI4_PAGE_SIZE. - Fixed double byte swap on received RRQ. - Fixed mask size for the wq_id mask from 0x7F to 0x7FFF. - Clear FC_FABRIC flag when NPIV LOGO completes (and add a log message). - Modified driver to skip round robin only when ulpStatus==LOCAL_REJECT and word4=SEQUENCE_TIMEOUT to prevent FLOGI to disconnected FCF. - Don't add rport if driver unloading Signed-off-by:
-
James Smart authored
Debugfs enhancements - Added iDiag support for new adapters. - Added queue entry access methods. - Fix host/port index in decimal - Added Doorbell register access methods. Signed-off-by:
-
- May 01, 2011
-
-
Krishna Gudipati authored
Move the initialization of debugfs before bfa init, to enable us to collect driver/firmware traces if init fails. Also add a printk to display message on bfa_init failure. Signed-off-by:
Krishna Gudipati <kgudipat@brocade.com> Signed-off-by:
-
Jing Huang authored
This patch includes fixes for two issues releated to firmware download implementation: 1) Merged memory leak fix provided by Jesper Juhl <jj@chaosbits.net>. Basically we need to call release_firmware() after request_firmware(). 2) fixed issues with the firmware download interface as pointed out by Rolf Eike Beer <eike@sf-mail.de> in linux-scsi. Rearranged the code and fixed related function protypes. Signed-off-by:
Jing Huang <huangj@brocade.com> Signed-off-by:
-
Wayne Boyer authored
During performance testing on P7 machines it was observed that the interrupt service routine was doing unnecessary MMIO operations. This patch rearranges the logic of the routine and moves some of the code out of the main routine. The result is that there are now fewer MMIO operations in the performance path of the code. As a result of the above change, an existing condition was exposed where the driver could get an "unexpected" hrrq interrupt. The original code would flag the interrupt as unexpected and then reset the adapter. After further analysis it was confirmed that this condition can occasionally occur and that the interrupt can safely be ignored. Additional code in this patch detects this condition, clears the interrupt and allows the driver to continue without resetting the adapter. Signed-off-by:
Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by:
-
Moger, Babu authored
Based on the operating modes, handler decides whether to send mode select or not. Purpose here is to reduce io-shipping as much as possible whenever there is an option. Signed-off-by:
Babu Moger <babu.moger@lsi.com> Reviewed-by:
Yanling Qi <yanling.qi@lsi.com> Reviewed-by:
Sudhir Dachepalli <Sudhir.Dachepalli@lis.com> Reviewed-by:
Somasundaram Krishnasamy <Somasundaram.Krishnasamy@lsi.com> Reviewed-by:
Bob Stankey <Robert.Stankey@lsi.com> Reviewed-by:
Vijay Chauhan <Vijay.Chauhan@lsi.com> Signed-off-by:
-
