2.6.11 gave __GFP_ZERO's prep_zero_page a bogus "highmem may have to wait"
assertion.  Presumably added under the misconception that clear_highpage
uses nonatomic kmap; but then and now it uses kmap_atomic, so no problem.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tmpfs was misconverted to __GFP_ZERO in 2.6.11.  There's an unusual case in
which shmem_getpage receives the page from its caller instead of allocating.
We must cover this case by clear_highpage before SetPageUptodate, as before.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: clean up kernel/sched_stat.h
  sched: clean up overlong line in kernel/sched_debug.c
  sched: clean up, move __sched_text_start/end to sched.h
  sched: clean up sd_alloc_ctl_cpu_table() definition
  softlockup: fix false positives on CONFIG_NOHZ

fix: http://bugzilla.kernel.org/show_bug.cgi?id=3043



only allow coredumping to the same uid that the coredumping
task runs under.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

clean up kernel/sched_stat.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

clean up overlong line in kernel/sched_debug.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

move __sched_text_start/end to sched.h. No code changed:

   text    data     bss     dec     hex filename
  26582    2310      28   28920    70f8 sched.o.before
  26582    2310      28   28920    70f8 sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>

clean up sd_alloc_ctl_cpu_table() definition.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

David Miller reported soft lockup false-positives that trigger
on NOHZ due to CPUs idling for more than 10 seconds.

The solution is touch the softlockup watchdog when we return from
idle. (by definition we are not 'locked up' when we were idle)

 http://bugzilla.kernel.org/show_bug.cgi?id=9409



Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: reverse inline-data truncate args
  ocfs2: Fix comparison in ocfs2_size_fits_inline_data()
  ocfs2: Remove bug statement in ocfs2_dentry_iput()
  [PATCH] ocfs2: Remove expensive bitmap scanning
  ocfs2: log valid inode # on bad inode
  ocfs2: Filter -ENOSPC in mlog_errno()
  [PATCH] fs/ocfs2: Add missing "space"
  ocfs2: Reset journal parameters after s_mount_opt update

* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
  m32r: Update sys_rt_sigsuspend
  m32r: Ignore warnings for unused syscalls
  m32r: Add missing syscalls

ocfs2_truncate() and ocfs2_remove_inode_range() had reversed their "set
i_size" arguments to ocfs2_truncate_inline(). Fix things so that truncate
sets i_size, and punching a hole ignores it.

This exposed a problem where punching a hole in an inline-data file wasn't
updating the page cache, so fix that too.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

This was causing us to prematurely push out inline data by one byte.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

The existing bug statement didn't take into account unhashed dentries which
might not have a cluster lock on them. This could happen if a node exporting
the file system via NFS is rebooted, re-exported to nfs clients and then
unmounted. It's fine in this case to not have a dentry cluster lock.

Just remove the bug statement and replace it with an error print, which
does the proper checks. Though we want to know if something has happened
which might have prevented a cluster lock from being created, it's
definitely not necessary to panic the machine for this.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

Enable expensive bitmap scanning only if DEBUG option is enabled.
The bitmap scanning quite loads the CPU and on my machine the write
throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync
improves from 37 MB/s to 45.4 MB/s in local mode...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

If the inode block isn't valid then we don't want to print the value from
that, instead print the block number which was passed in (which should
always be correct). Also, turn this into a debug print for now - folks who
hit an actual problem always have other logs indicating what the source is.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

It's almost never worth printing in that situation and we keep forgetting to
manually filter it out.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

Right now we're just setting them from the existing parameters, not the
new ones that a remount specified.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide-scsi: use print_hex_dump from <linux/kernel.h>
  ide: More TSST drives with broken cable detection
  ali14xx: constify __initdata
  ide: remove bogus ide_fix_driveid() comment
  trm290: remove bogus init_hwif_trm290() comment
  piix: add HP compaq laptop to short cable list
  alim15x3: add Mitac 8317 and derivatives to ali_cable_override()
  ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist
  amd74xx: arm hack
  drivers/ide: Add missing "space"
  ide-cris: don't override ide_register_hw() result
  ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  ide: add CONFIG_IDE_H8300 config option
  ide/Kconfig: fix mpc8xx host driver dependencies
  macide/q40ide: add missing __init tag to {macide,q40ide}_init()
  aec62xx: Fix kernel oops in driver's probe function
  ide: skip ide_wait_not_busy() on noprobe-disks
  siimage: remove resetproc() method
  ide: don't set PIO mode on pre-EIDE drives
  sis5513.c: Add Packard Bell EasyNote K5305 to laptops

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: SVM: Fix FPU leak while emulating clts
  KVM: SVM: Unload guest fpu on vcpu_put()
  KVM: x86 emulator: Use emulator_write_emulated and not emulator_write_std
  KVM: x86 emulator: fix the saving of of the eip value
  KVM: x86 emulator: fix JMP_REL

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  scatterlist: add more safeguards
  Revert "ll_rw_blk: temporarily enable max_segments tweaking"
  mmc: Add missing sg_init_table() call
  block: Fix memory leak in alloc_disk_node()
  alpha: fix sg_page breakage
  blktrace: Make sure BLKTRACETEARDOWN does the full cleanup.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/iser: Add missing counter increment in iser_data_buf_aligned_len()
  IB/ehca: Fix static rate regression
  mlx4_core: Fix state check in mlx4_qp_modify()
  IB/ipath: Normalize error return codes for posting work requests
  IB/ipath: Fix offset returned to ibv_modify_srq()
  IB/ipath: Fix error path in QP creation
  IB/ipath: Fix offset returned to ibv_resize_cq()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: adds the context menu key (HUT GenDesc 0x84)
  Input: add definitions for frame forward and frame back keys
  Input: bf54x-keys - keypad does not exist on BF544 parts
  Input: gpio-keys - request and configure GPIOs
  Input: i8042 - add i8042.noloop quirk for MS Virtual Machine
  Sonypi: use synchronize_irq instead of sycnronize_sched
  sonypi: fit input devices into sysfs tree
  sony-laptop: fit input devices into sysfs tree

these utilities implemented in lib/hexdump.c are more handy, please use this.

Bart:
- s/KERN_DEBUG/KERN_CONT/ as pointed out by Randy
- s/DUMP_PREFIX_OFFSET/DUMP_PREFIX_NONE/
- don't include ASCII dump
- respect 80-columns limit

Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add more TSST (Toshiba/Samsung) drives to the
'broken cable detection' blacklist.

Signed-off-by: Peter Missel <(peter.missel@onlinehome.de)>
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Port of Jeff's libata commit 54174db3


("[libata] ata_piix: add HP compaq laptop to short cable list").

Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Port of Alan's patch for pata_ali.c.

Cc: Alan Cox <alan@redhat.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Based on the report from snowbat@gmail.com.

Fixes kernel bugzilla bug #9195.

Tested-by:  <snowbat@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/pci/amd74xx.c: In function `init_hwif_amd74xx':
drivers/ide/pci/amd74xx.c:387: error: implicit declaration of function `pci_get_legacy_ide_irq'

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Don't override ide_register_hw() result and check if there is a hwif
  available to use.

* MAX_HWIFS is user configurable nowadays so replace it by hard-coded value.

* Remove the comment about ide_hwifs[].

Acked-by: Mikael Starvik <starvik@axis.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move ETRAX_IDE and friends from arch/cris/arch-{v10,v32}/drivers/Kconfig
  to drivers/ide/Kconfig.

* Don't force selecting ide-disk and ide-cd device drivers
  (please handle this through defconfig if necessary).

* Make ETRAX_IDE depend on BROKEN for the time being
  (it doesn't even compile currently).

Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add a separate config option for ide-8300 host driver instead of depending
on CONFIG_H8300.

This change is a preparation for the future changes and also allows ide-h8300
to be disabled if needed.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Only LWMON, IVMS8, IVML24 and TQM8xxL platforms have the needed
defines (IDE0_BASE_OFFSET and friends) in the platform header file.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add pci_enable_device() to aec62xx probe function
before doing any I/O.

Original probe function tries to read from device's
PCI region 4 before calling ide_setup_pci_device().
Since the device is not enabled at this point,
on machines that have no firmware PCI initialization
(e.g. ASUS WL-700gE router), corresponding PCI BAR 
is 0 and the following inb() causes a kernel oops.

Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.yu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>