- Jan 25, 2011
-
-
Mike McCormack authored
Signed-off-by:
Mike McCormack <mikem@ring3k.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
- Jan 22, 2011
-
-
Alexey Khoroshilov authored
I do not see any reason for the mutex_unlock(&inode->i_mutex); in pohmelfs_rename(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Naveen Kumar Gaddipati authored
Update with the kernel object name of touch device for getting the regulator of the synaptics rmi4 touch device. Signed-off-by:
Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Signed-off-by:
-
Ralph Loader authored
Use -E... instead of just E... in a few places where negative error codes are expected by a functions callers. These were found by grepping with coccinelle & then inspecting by hand to determine which were bugs. The staging/cxt1e1 driver appears to intentionally use positive E... error codes in some places, and negative -E... error codes in others, making it hard to know which is intended where - very likely I missed some problems in that driver. Signed-off-by:
Ralph Loader <suckfish@ihug.co.nz> Signed-off-by:
-
Vasiliy Kulikov authored
put_user() may fail, if so return -EFAULT. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
-
Ian Abbott authored
Most comedi hardware drivers that support the INSN_BITS instruction ignore the base channel (specified by insn->chanspec) and assume it is 0. The base channel is supposed to affect how the mask (in data[0]) and bits (in data[1]) are treated. Bit 0 applies to the base channel, bit 1 applies to base channel plus 1, etc. For subdevices with no more than 32 channels, this patch modifies the chanspec and data before presenting it to the hardware driver, and modifies the data bits read back by the hardware driver (into data[1]). This makes it appear to the hardware driver that the base channel was set to 0. For subdevices with more than 32 channels, the instruction is left unmodified, as it is assumed that the hardware driver takes note of the base channel in this case in order to provide access beyond channel 31. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Jesper Juhl authored
linux/slab.h is included twice in ft1000_dnld.c - remove duplicate. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Peter Huewe authored
This patch fixes the sparse warnings "obsolete struct initializer, use C99 syntax" in vt6655/device_main.c by converting the struct to C99 syntax KernelVersion: linux-next-20110110 Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Peter Huewe authored
This patch fixes the sparse warnings "obsolete struct initializer, use C99 syntax" in icp_multi.c by converting the struct to C99 syntax KernelVersion: linux-next-20110110 Signed-off-by:
-
Peter Huewe authored
This patch fixes the sparse warnings in me4000.c: me4000.c:122:1: warning: obsolete struct initializer, use C99 syntax me4000.c:123:1: warning: obsolete struct initializer, use C99 syntax me4000.c:124:1: warning: obsolete struct initializer, use C99 syntax me4000.c:125:1: warning: obsolete struct initializer, use C99 syntax by converting the struct to use C99 syntax Signed-off-by:
-
Tomas Winkler authored
Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
for in-tree driver we can use snd_card_create for backports to older kernels this can be easily wrapped Signed-off-by:
-
Tomas Winkler authored
remove \ from the code where C syntex doesnt require it Signed-off-by:
-
Tomas Winkler authored
easycap_main.c:34:5: warning: symbol 'easycap_debug' was not declared. Should it be static? easycap_main.c:36:5: warning: symbol 'easycap_gain' was not declared. Should it be static? These two variables actually were declared in several places. The variables are used in several files. I've fixed "easycap_debug" so it gets declared in one place only and included properly. For "easycap_gain" made it static and I created added a ->gain member to the easycap struct. This seems cleaner than using a global variable and later on we may make this controlable via sysfs. Cc:Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Mike Thomas authored
This is necessary because some distributions are disabling OSS entirely. Signed-off-by:
Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
-
Larry Finger authored
* select FW_LOADER in Kconfig - From: Stefan Lippers-Hollmann <s.l-h@gmx.de> * declare MODULE_FIRMWARE for r8712u and change to correct directory * delete 10K line farray.h containing internal firmware Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
Signed-off-by:
-
Larry Finger authored
Signed-off-by:
-
Roland Stigge authored
IIO Driver for Maxim MAX517, MAX518 and MAX519 DAC Signed-off-by:
Roland Stigge <stigge@antcom.de> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Mike Thomas authored
The parameter easycap_debug appears in macros JOT and JOM and therefore needs to be visible from all source files. The easycap_ prefix should be sufficient to avoid namespace clashes outside the module. Signed-off-by:
-
Ben Hutchings authored
These firmware images are already unused. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
The file added to linux-firmware is a copy of the current array which does not have a recognisable header, so no validation is done. Change the firmware version check to accept newer versions. Signed-off-by:
-
Brice Dubost authored
This patch allows the possibility to choose between edgre triggering and level trigerring, for the analog input, on the Measurement Computing PCI-DAS* boards Signed-off-by:
Brice Dubost <braice@braice.net> Signed-off-by:
-
Javier Martinez Canillas authored
staging: keucr: Delete use kernel strcmp() & strcpy() from TODO file Signed-off-by:
Javier Martinez Canillas <martinez.javier@gmail.com> Acked-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Al Cho <acho@novell.com> Signed-off-by:
-
Javier Martinez Canillas authored
staging: keucr: Delete StringCmp() and StringCopy custom functions Signed-off-by:
-
Javier Martinez Canillas authored
staging: keucr: Use memcpy() instead custom StringCopy() and some style cleanups Signed-off-by:
-
Javier Martinez Canillas authored
staging: keucr: Use memcmp() instead custom StringCmp() and some style cleanups Signed-off-by:
-
Dan Carpenter authored
usb_alloc_urb() can return NULL so check for that and return -ENOMEM if it happens. Signed-off-by:
-
Dan Carpenter authored
Bitwise and logical or are the equivalent here, so this doesn't affect runtime, but logical or was intended. The original code causes a warning in Sparse: "warning: dubious: !x | !y" Signed-off-by:
-
roel kluin authored
It should decrement or we read past the array Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Mark Allyn authored
These changes enable the driver to work with SEP version 3.4.5 Major change is to use non DMA access for any data comming from a function that uses the external application service on the SEP. Signed-off-by:
Mark Allyn <mark.a.allyn@intel.com> Signed-off-by:
-
Mark Allyn authored
Signed-off-by:
-
Mark Allyn authored
Signed-off-by:
-
wwang authored
rts_pstor is used to support Realtek PCI-E card readers, including rts5209, rts5208, Barossa. Signed-off-by:
wwang <wei_wang@realsil.com.cn> Signed-off-by:
-
Randy Dunlap authored
Don't build hv_utils when CONFIG_CONNECTOR is not enabled. Fixes these build errors: ERROR: "cn_add_callback" [drivers/staging/hv/hv_utils.ko] undefined! ERROR: "cn_del_callback" [drivers/staging/hv/hv_utils.ko] undefined! ERROR: "cn_netlink_send" [drivers/staging/hv/hv_utils.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Arend van Spriel authored
Quite some definitions are not referenced in the drivers sources and clutter up the files so they are removed. Reviewed-by:
Brett Rudley <brudley@broadcom.com> Reviewed-by:
Henry Ptasinski <henryp@broadcom.com> Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
Working through a list of unused functions in the driver tree. This file has following redundant function(s): wlc_stf_stbc_rx_get wlc_stf_rxchain_set Reviewed-by:
-
Arend van Spriel authored
This file defined an inline function pkt_txh_seqnum() which was not used and as such is removed. Reviewed-by:
-
