- Jul 12, 2012
-
-
Yinghai Lu authored
Commit 238305bb ("mm: remove sparsemem allocation details from the bootmem allocator") introduced a bug in the allocation goal calculation that put section usemaps not in the same section as the node descriptors, creating unnecessary hotplug dependencies between them: node 0 must be removed before remove section 16399 node 1 must be removed before remove section 16399 node 2 must be removed before remove section 16399 node 3 must be removed before remove section 16399 node 4 must be removed before remove section 16399 node 5 must be removed before remove section 16399 node 6 must be removed before remove section 16399 The reason is that it applies PAGE_SECTION_MASK to the physical address of the node descriptor when finding a suitable place to put the usemap, when this mask is actually intended to be used with PFNs. Because the PFN mask is wider, the target address will point beyond the wanted section holding the node descriptor and the node must be offlined before the section holding the usemap can go. Fix this by extending the mask to address width before use. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alan Cox authored
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=43871 Reported-by:
<dcb314@hotmail.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Chris Zankel <chris@zankel.net> Signed-off-by:
-
Hugh Dickins authored
shmem_add_to_page_cache() has three callsites, but only one of them wants the radix_tree_preload() (an exceptional entry guarantees that the radix tree node is present in the other cases), and only that site can achieve mem_cgroup_uncharge_cache_page() (PageSwapCache makes it a no-op in the other cases). We did it this way originally to reflect add_to_page_cache_locked(); but it's confusing now, so move the radix_tree preloading and mem_cgroup uncharging to that one caller. Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
-
Hugh Dickins authored
When adding the page_private checks before calling shmem_replace_page(), I did realize that there is a further race, but thought it too unlikely to need a hurried fix. But independently I've been chasing why a mem cgroup's memory.stat sometimes shows negative rss after all tasks have gone: I expected it to be a stats gathering bug, but actually it's shmem swapping's fault. It's an old surprise, that when you lock_page(lookup_swap_cache(swap)), the page may have been removed from swapcache before getting the lock; or it may have been freed and reused and be back in swapcache; and it can even be using the same swap location as before (page_private same). The swapoff case is already secure against this (swap cannot be reused until the whole area has been swapped off, and a new swapped on); and shmem_getpage_gfp() is protected by shmem_add_to_page_cache()'s check for the expected radix_tree entry - but a little too late. By that time, we might have already decided to shmem_replace_page(): I don't know of a problem from that, but I'd feel more at ease not to do so spuriously. And we have already done mem_cgroup_cache_charge(), on perhaps the wrong mem cgroup: and this charge is not then undone on the error path, because PageSwapCache ends up preventing that. It's this last case which causes the occasional negative rss in memory.stat: the page is charged here as cache, but (sometimes) found to be anon when eventually it's uncharged - and in between, it's an undeserved charge on the wrong memcg. Fix this by adding an earlier check on the radix_tree entry: it's inelegant to descend the tree twice, but swapping is not the fast path, and a better solution would need a pair (try+commit) of memcg calls, and a rework of shmem_replace_page() to keep out of the swapcache. We can use the added shmem_confirm_swap() function to replace the find_get_page+page_cache_release we were already doing on the error path. And add a comment on that -EEXIST: it seems a peculiar errno to be using, but originates from its use in radix_tree_insert(). [It can be surprising to see positive rss left in a memcg's memory.stat after all tasks have gone, since it is supposed to count anonymous but not shmem. Aside from sharing anon pages via fork with a task in some other memcg, it often happens after swapping: because a swap page can't be freed while under writeback, nor while locked. So it's not an error, and these residual pages are easily freed once pressure demands.] Signed-off-by:
-
Hugh Dickins authored
Revert 4fb5ef08 ("tmpfs: support SEEK_DATA and SEEK_HOLE"). I believe it's correct, and it's been nice to have from rc1 to rc6; but as the original commit said: I don't know who actually uses SEEK_DATA or SEEK_HOLE, and whether it would be of any use to them on tmpfs. This code adds 92 lines and 752 bytes on x86_64 - is that bloat or worthwhile? Nobody asked for it, so I conclude that it's bloat: let's revert tmpfs to the dumb generic support for v3.5. We can always reinstate it later if useful, and anyone needing it in a hurry can just get it out of git. Signed-off-by:
-
Kevin Hilman authored
Requesting a threaded interrupt without a primary handler and without IRQF_ONESHOT is dangerous, and after commit 1c6c6952 ("genirq: Reject bogus threaded irq requests"), these requests are rejected. This causes ->probe() to fail, and the RTC driver not to be availble. To fix, add IRQF_ONESHOT to the IRQ flags. Tested on OMAP3730/OveroSTORM and OMAP4430/Panda board using rtcwake to wake from system suspend multiple times. Signed-off-by:
Kevin Hilman <khilman@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Steven J. Magnani authored
fat_encode_fh() can fetch an invalid i_pos value on systems where 64-bit accesses are not atomic. Make it use the same accessor as the rest of the FAT code. Signed-off-by:
Steven J. Magnani <steve@digidescorp.com> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Kevin Hilman authored
Add the OMAP CPUFreq driver to the list of files in the OMAP Power Management section. I've already been maintaining this driver, this just makes it official. Signed-off-by:
-
Dan Carpenter authored
The code here has a nested spin_lock_irqsave(). It's not needed since IRQs are already disabled and it causes a problem because it means that IRQs won't be enabled again at the end. The second call to spin_lock_irqsave() will overwrite the value of irq_flags and we can't restore the proper settings. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Robin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Bob Liu authored
There is a bug in the below scenario for !CONFIG_MMU: 1. create a new file 2. mmap the file and write to it 3. read the file can't get the correct value Because sys_read() -> generic_file_aio_read() -> simple_readpage() -> clear_page() which causes the page to be zeroed. Add SetPageUptodate() to ramfs_nommu_expand_for_mapping() so that generic_file_aio_read() do not call simple_readpage(). Signed-off-by:
Bob Liu <lliubbo@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Benoît Thébaudeau authored
Fixes WARNING: at irq/handle.c:146 handle_irq_event_percpu+0x19c/0x1b8() irq 25 handler mxc_rtc_interrupt+0x0/0xac enabled interrupts Modules linked in: (unwind_backtrace+0x0/0xf0) from (warn_slowpath_common+0x4c/0x64) (warn_slowpath_common+0x4c/0x64) from (warn_slowpath_fmt+0x30/0x40) (warn_slowpath_fmt+0x30/0x40) from (handle_irq_event_percpu+0x19c/0x1b8) (handle_irq_event_percpu+0x19c/0x1b8) from (handle_irq_event+0x28/0x38) (handle_irq_event+0x28/0x38) from (handle_level_irq+0x80/0xc4) (handle_level_irq+0x80/0xc4) from (generic_handle_irq+0x24/0x38) (generic_handle_irq+0x24/0x38) from (handle_IRQ+0x30/0x84) (handle_IRQ+0x30/0x84) from (avic_handle_irq+0x2c/0x4c) (avic_handle_irq+0x2c/0x4c) from (__irq_svc+0x40/0x60) Exception stack(0xc050bf60 to 0xc050bfa8) bf60: 00000001 00000000 003c4208 c0018e20 c050a000 c050a000 c054a4c8 c050a000 bf80: c05157a8 4117b363 80503bb4 00000000 01000000 c050bfa8 c0018e2c c000e808 bfa0: 60000013 ffffffff (__irq_svc+0x40/0x60) from (default_idle+0x1c/0x30) (default_idle+0x1c/0x30) from (cpu_idle+0x68/0xa8) (cpu_idle+0x68/0xa8) from (start_kernel+0x22c/0x26c) Signed-off-by:
Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Wen Congyang authored
We should goto error to release memory resource if hotadd_new_pgdat() failed. Signed-off-by:
Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by:
-
Geert Uytterhoeven authored
Fix the build error: include/linux/regset.h: In function 'user_regset_copyout_zero': include/linux/regset.h:289:3: error: implicit declaration of function '__clear_user' [-Werror=implicit-function-declaration] Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by:
-
Geert Uytterhoeven authored
__gu_val is const if the passed ptr is const, giving: include/linux/pagemap.h: In function 'fault_in_pages_readable': include/linux/pagemap.h:442:2: error: assignment of read-only variable '__gu_val' include/linux/pagemap.h:448:4: error: assignment of read-only variable '__gu_val' include/linux/pagemap.h: In function 'fault_in_multipages_readable': include/linux/pagemap.h:499:3: error: assignment of read-only variable '__gu_val' include/linux/pagemap.h:508:3: error: assignment of read-only variable '__gu_val' make[4]: *** [init/main.o] Error 1 As we don't care about the actual value of __gu_val in the unhandled case (it will cause a link error anyway), just remove the assignment. Signed-off-by:
-
Geert Uytterhoeven authored
Fix the build error: arch/h8300/kernel/time.c: In function 'h8300_timer_tick': arch/h8300/kernel/time.c:39:2: error: implicit declaration of function 'get_irq_regs' [-Werror=implicit-function-declaration] arch/h8300/kernel/time.c:39:42: error: invalid type argument of '->' (have 'int') Signed-off-by:
-
Geert Uytterhoeven authored
The keyword is "static", not "statis": arch/h8300/kernel/signal.c:455:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' arch/h8300/kernel/signal.c: In function 'do_notify_resume': arch/h8300/kernel/signal.c:511:3: error: implicit declaration of function 'do_signal' [-Werror=implicit-function-declaration] arch/h8300/kernel/signal.c: At top level: arch/h8300/kernel/signal.c:414:1: warning: 'handle_signal' defined but not used [-Wunused-function] Introduced in commit 7ae4e32a ("h8300: switch to saved_sigmask-based sigsuspend/rt_sigsuspend") Signed-off-by:
-
Geert Uytterhoeven authored
Fix the h8300 build error: kernel/sched/core.c: In function 'context_switch': kernel/sched/core.c:2061:2: error: implicit declaration of function 'arch_start_context_switch' [-Werror=implicit-function-declaration] Signed-off-by:
-
Lee Jones authored
Without this patch, if Device Tree is enabled the AB8500 RTC wouldn't get probed at all, as there is no reference to it from platform code. This patch ensures the driver is probed during normal DT start-up. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Lee Jones authored
This driver's IRQ registration is failing because the kernel now forces IRQs to be ONESHOT if no IRQ handler is passed. Signed-off-by:
-
David Rientjes authored
If page migration cannot charge the temporary page to the memcg, migrate_pages() will return -ENOMEM. This isn't considered in memory compaction however, and the loop continues to iterate over all pageblocks trying to isolate and migrate pages. If a small number of very large memcgs happen to be oom, however, these attempts will mostly be futile leading to an enormous amout of cpu consumption due to the page migration failures. This patch will short circuit and fail memory compaction if migrate_pages() returns -ENOMEM. COMPACT_PARTIAL is returned in case some migrations were successful so that the page allocator will retry. Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Konstantin Khlebnikov authored
"no other files mapped" requirement from my previous patch (c/r: prctl: update prctl_set_mm_exe_file() after mm->num_exe_file_vmas removal) is too paranoid, it forbids operation even if there mapped one shared-anon vma. Let's check that current mm->exe_file already unmapped, in this case exe_file symlink already outdated and its changing is reasonable. Plus, this patch fixes exit code in case operation success. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Reported-by:
Cyrill Gorcunov <gorcunov@openvz.org> Tested-by:
-
Luis Henriques authored
As ocfs2_fallocate() will invoke __ocfs2_change_file_space() with a NULL as the first parameter (file), it may trigger a NULL pointer dereferrence due to a missing check. Addresses http://bugs.launchpad.net/bugs/1006012 Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Reported-by:
Bret Towe <magnade@gmail.com> Tested-by:
Joel Becker <jlbec@evilplan.org> Acked-by:
Mark Fasheh <mfasheh@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
Fix the warnings: arch/mn10300/kernel/irq.c:173:7: warning: "CONFIG_MN10300_TTYSM1_TIMER9" is not defined [-Wundef] arch/mn10300/kernel/irq.c:175:7: warning: "CONFIG_MN10300_TTYSM1_TIMER3" is not defined [-Wundef] Signed-off-by:
-
Geert Uytterhoeven authored
Fix the warnings: arch/mn10300/mm/dma-alloc.c: At top level: arch/mn10300/mm/dma-alloc.c:63:1: warning: data definition has no type or storage class [enabled by default] arch/mn10300/mm/dma-alloc.c:63:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/mn10300/mm/dma-alloc.c:63:1: warning: parameter names (without types) in function declaration [enabled by default] arch/mn10300/mm/dma-alloc.c:75:1: warning: data definition has no type or storage class [enabled by default] arch/mn10300/mm/dma-alloc.c:75:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/mn10300/mm/dma-alloc.c:75:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by:
-
Geert Uytterhoeven authored
Fix the warning: arch/mn10300/kernel/traps.c:304:1: warning: data definition has no type or storage class [enabled by default] arch/mn10300/kernel/traps.c:304:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/mn10300/kernel/traps.c:304:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by:
-
Geert Uytterhoeven authored
Fix the nm10300 build failure: In file included from arch/mn10300/kernel/csrc-mn10300.c:14:0: arch/mn10300/kernel/internal.h:42:1: error: unknown type name 'irqreturn_t' Signed-off-by:
-
Geert Uytterhoeven authored
Fix the warning: include/linux/ptrace.h:66:0: warning: "PTRACE_O_TRACESYSGOOD" redefined [enabled by default] arch/mn10300/include/asm/ptrace.h:85:0: note: this is the location of the previous definition We already have it in <linux/ptrace.h>, so remove it from <asm/ptrace.h> Signed-off-by:
-
Geert Uytterhoeven authored
Move the static inline function setup_jiffies_interrupt() from <asm/timex.h> to arch/mn10300/kernel/cevt-mn10300.c, which is its only callsite. This allows to remove the inclusion of <asm/hardirq.h> and <linux/irq.h> from <asm/timex.h> and <unit/timex.h>, fixing include hell like: include/linux/jiffies.h:260:31: warning: "CLOCK_TICK_RATE" is not defined [-Wundef] include/linux/jiffies.h:260:31: warning: "CLOCK_TICK_RATE" is not defined [-Wundef] include/linux/jiffies.h:46:42: error: division by zero in #if ... make[4]: *** [arch/mn10300/kernel/asm-offsets.s] Error 1 and (after a quick hack for the above by defining CLOCK_TICK_RATE in <linux/jiffies.h>): In file included from include/linux/notifier.h:15:0, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:718, from include/linux/gfp.h:4, from include/linux/irq.h:20, from arch/mn10300/unit-asb2303/include/unit/timex.h:15, from arch/mn10300/include/asm/timex.h:15, from include/linux/timex.h:174, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, include/linux/srcu.h:55:22: error: field 'work' has incomplete type As a consequence, we do need a few more inclusions of <asm/irq.h>, namely in arch/mn10300/unit-asb2303/smc91111.c and arch/mn10300/unit-asb2305/unit-init.c. Signed-off-by: -
Devendra Naga authored
`config' is freed and is then used in the rtc_device_unregister() call, causing a kernel panic. Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Reviewed-by:
Viresh Kumar <viresh.linux@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jiang Liu authored
kswapd_stop() is called to destroy the kswapd work thread when all memory of a NUMA node has been offlined. But kswapd_stop() only terminates the work thread without resetting NODE_DATA(nid)->kswapd to NULL. The stale pointer will prevent kswapd_run() from creating a new work thread when adding memory to the memory-less NUMA node again. Eventually the stale pointer may cause invalid memory access. An example stack dump as below. It's reproduced with 2.6.32, but latest kernel has the same issue. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81051a94>] exit_creds+0x12/0x78 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/memory/memory391/state CPU 11 Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq microcode fuse loop dm_mod tpm_tis rtc_cmos i2c_i801 rtc_core tpm serio_raw pcspkr sg tpm_bios igb i2c_core iTCO_wdt rtc_lib mptctl iTCO_vendor_support button dca bnx2 usbhid hid uhci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_generic ata_piix libata thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 7949, comm: sh Not tainted 2.6.32.12-qiuxishi-5-default #92 Tecal RH2285 RIP: 0010:exit_creds+0x12/0x78 RSP: 0018:ffff8806044f1d78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff880604f22140 RCX: 0000000000019502 RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000 RBP: ffff880604f22150 R08: 0000000000000000 R09: ffffffff81a4dc10 R10: 00000000000032a0 R11: ffff880006202500 R12: 0000000000000000 R13: 0000000000c40000 R14: 0000000000008000 R15: 0000000000000001 FS: 00007fbc03d066f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000060f029000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sh (pid: 7949, threadinfo ffff8806044f0000, task ffff880603d7c600) Stack: ffff880604f22140 ffffffff8103aac5 ffff880604f22140 ffffffff8104d21e ffff880006202500 0000000000008000 0000000000c38000 ffffffff810bd5b1 0000000000000000 ffff880603d7c600 00000000ffffdd29 0000000000000003 Call Trace: __put_task_struct+0x5d/0x97 kthread_stop+0x50/0x58 offline_pages+0x324/0x3da memory_block_change_state+0x179/0x1db store_mem_state+0x9e/0xbb sysfs_write_file+0xd0/0x107 vfs_write+0xad/0x169 sys_write+0x45/0x6e system_call_fastpath+0x16/0x1b Code: ff 4d 00 0f 94 c0 84 c0 74 08 48 89 ef e8 1f fd ff ff 5b 5d 31 c0 41 5c c3 53 48 8b 87 20 06 00 00 48 89 fb 48 8b bf 18 06 00 00 <8b> 00 48 c7 83 18 06 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 RIP exit_creds+0x12/0x78 RSP <ffff8806044f1d78> CR2: 0000000000000000 [akpm@linux-foundation.org: add pglist_data.kswapd locking comments] Signed-off-by:Xishi Qiu <qiuxishi@huawei.com> Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- Jul 08, 2012
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security docs update from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: Minor improvements to no_new_privs documentation
-
Linus Torvalds authored
We already use them for openat() and friends, but fchdir() also wants to be able to use O_PATH file descriptors. This should make it comparable to the O_SEARCH of Solaris. In particular, O_PATH allows you to access (not-quite-open) a directory you don't have read persmission to, only execute permission. Noticed during development of multithread support for ksh93. Reported-by:
ольга крыжановская <olga.kryzhanovska@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org # O_PATH introduced in 3.0+ Signed-off-by:
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Last merge window, we had some updates from Al cleaning up the signal restart handling. These have caused some problems on ARM, and while Al has some fixes, we have some concerns with Al's patches but we've been unsuccesful with discussing this. We have got to the point where we need to do something, and we've decided that the best solution is to revert the appropriate commits until Al is able to reply to us. Also included here are four patches to fix warnings that I've noticed in my build system, and one fix for kprobes test code." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix warning caused by wrongly typed arm_dma_limit ARM: fix warnings about atomic64_read ARM: 7440/1: kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6 ARM: 7441/1: perf: return -EOPNOTSUPP if requested mode exclusion is unavailable ARM: 7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK" ARM: 7442/1: Revert "remove unused restart trampoline" ARM: fix set_domain() macro ARM: fix mach-versatile/pci.c warning
-
- Jul 07, 2012
-
-
Andy Lutomirski authored
The documentation didn't actually mention how to enable no_new_privs. This also adds a note about possible interactions between no_new_privs and LSMs (i.e. why teaching systemd to set no_new_privs is not necessarily a good idea), and it references the new docs from include/linux/prctl.h. Suggested-by:
Rob Landley <rob@landley.net> Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
James Morris <james.l.morris@oracle.com>
-
Linus Torvalds authored
Merge tag 'ecryptfs-3.5-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: "Fixes an incorrect access mode check when preparing to open a file in the lower filesystem. This isn't an urgent fix, but it is simple and the check was obviously incorrect. Also fixes a couple important bugs in the eCryptfs miscdev interface. These changes are low risk due to the small number of users that use the miscdev interface. I was able to keep the changes minimal and I have some cleaner, more complete changes queued up for the next merge window that will build on these patches." * tag 'ecryptfs-3.5-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Gracefully refuse miscdev file ops on inherited/passed files eCryptfs: Fix lockdep warning in miscdev operations eCryptfs: Properly check for O_RDONLY flag before doing privileged open
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull target fixes from Nicholas Bellinger: "Two minor target fixes. There is really nothing exciting and/or controversial this time around. There's one fix from MDR for a RCU debug warning message within tcm_fc code (CC'ed to stable), and a small AC fix for qla_target.c based upon a recent Coverity static report. Also, there is one other outstanding virtio-scsi LUN scanning bugfix that has been uncovered with the in-flight tcm_vhost driver over the last days, and that needs to make it into 3.5 final too. This patch has been posted to linux-scsi again here: http://marc.info/?l=linux-scsi&m=134160609212542&w=2 and I've asked James to include it in his next PULL request." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: qla2xxx: print the right array elements in qlt_async_event tcm_fc: Resolve suspicious RCU usage warnings -
Tyler Hicks authored
File operations on /dev/ecryptfs would BUG() when the operations were performed by processes other than the process that originally opened the file. This could happen with open files inherited after fork() or file descriptors passed through IPC mechanisms. Rather than calling BUG(), an error code can be safely returned in most situations. In ecryptfs_miscdev_release(), eCryptfs still needs to handle the release even if the last file reference is being held by a process that didn't originally open the file. ecryptfs_find_daemon_by_euid() will not be successful, so a pointer to the daemon is stored in the file's private_data. The private_data pointer is initialized when the miscdev file is opened and only used when the file is released. https://launchpad.net/bugs/994247 Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reported-by:
Sasha Levin <levinsasha928@gmail.com> Tested-by:
-
Alan Cox authored
Based upon Alan's patch from Coverity scan id 793583, these debug messages in qlt_async_event() should be starting from byte 0, which is always the Asynchronous Event Status Code from the parent switch statement. Also, rename reason_code -> login_code following the language used in 2500 FW spec for Port Database Changed (0x8014) -> Port Database Changed Event Mailbox Register for mailbox[2]. Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Mark Rustad authored
Use rcu_dereference_protected to tell rcu that the ft_lport_lock is held during ft_lport_create. This resolved "suspicious RCU usage" warnings when debugging options are turned on. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
