- Nov 06, 2021
-
-
Dmitry Baryshkov authored
The gcc_aggre1_pnoc_ahb_clk is crucial for the proper MSM8996/APQ8096 functioning. If it gets disabled, several subsytems will stop working (including eMMC/SDCC and USB). There are no in-kernel users of this clock, so it is much simpler to remove from the kernel. The clock was first removed in the commit 9e60de1c ("clk: qcom: Remove gcc_aggre1_pnoc_ahb_clk from msm8996") by Stephen Boyd, but got added back in the commit b5677521 ("clk: qcom: Add some missing gcc clks for msm8996") by Rajendra Nayak. Let's remove it again in hope that nobody adds it back. Reported-by:
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Fixes: b5677521 ("clk: qcom: Add some missing gcc clks for msm8996") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211104011155.2209654-1-dmitry.baryshkov@linaro.org Signed-off-by:
Stephen Boyd <sboyd@kernel.org>
-
Alexander Stein authored
Only imx8m_clk_hw_composite_core needs to set this flag. Fixes: a60fe746 ("clk: imx: Rework all imx_clk_hw_composite wrappers") Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20211103123947.3222443-1-alexander.stein@ew.tq-group.com Reviewed-by:
Abel Vesa <abel.vesa@nxp.com> Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon Signed-off-by:
-
- Nov 04, 2021
-
-
Joel Stanley authored
Move the soc revision parsing to the initial probe, saving the driver from parsing the register multiple times. Use this variable to select the correct divisor table for the AHB clock. Before this fix the A2 would have used the A0 table. Fixes: 2d491066 ("clk: ast2600: Fix AHB clock divider for A1") Signed-off-by:
Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210922235449.213631-1-joel@jms.id.au Reviewed-by:
Andrew Jeffery <andrew@aj.id.au> Signed-off-by:
-
Alexander Stein authored
During commit 6594988f ("clk: composite: Use rate_ops.determine_rate when also a mux is available") setting req->best_parent_hw got lost, so best_parent_hw stays NULL during switch to the same parent. This results in the (debug) message: clk_calc_new_rates: lcdif_pixel not gated but wants to reparent and the following rate change is dropped. Fixes: 6594988f ("clk: composite: Use rate_ops.determine_rate when also a mux is available") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
- Nov 03, 2021
-
-
Heiko Stuebner authored
Both of these drivers were converted to real drivers and got a tristate build option. But them being builtin_platform_drivers, they only ever should be build-in - as the name suggests. So adapt the Kconfig symbol and drop the MODULE_* parts from the drivers. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20211027132616.1039814-3-heiko@sntech.de Reviewed-by:
-
Heiko Stuebner authored
This reverts commit 1da80da0. Reading recent discussions [0] [1], I realized this change introduces a number of problems: - only converting to module_platform_driver creates the issue with the existing __init and __initdata attributes. When the driver would've been built as a module, all the missing clock-definitions (all are initdata) should've turned up as error in testing suggesting that the change wasn't at all - a clock driver is a very core component of soc bringup and making this able to be built as a module solely for enabling the soc vendor to add out of tree changes for Android implementations is not in our interest and also everything except a ramdisk won't probe without a clock controller. This is especially true when the changes aren't really tested and are merely added to move the mainline driver "out of the way". [0] https://lwn.net/Articles/872209/ [1] https://lore.kernel.org/all/163529604399.15791.378104318036812951@swboyd.mtv.corp.google.com/ Signed-off-by:
-
Ran Jianping authored
'dt-bindings/clock/mt8195-clk.h' included in '/drivers/clk/mediatek/clk-mt8195-imp_iic_wrap.c' is duplicated.It is also included on the 13 line. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Ran Jianping <ran.jianping@zte.com.cn> Link: https://lore.kernel.org/r/20211019062939.979660-1-ran.jianping@zte.com.cn Reviewed-by:
Chen-Yu Tsai <wenst@chromium.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The SiFive FU740 Power Reset Clock Interrupt Controller is a reset line provider so add respective reset-cells property to fix: arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml: clock-controller@10000000: '#reset-cells' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210920144944.162431-1-krzysztof.kozlowski@canonical.com Reviewed-by:
Rob Herring <robh@kernel.org> Acked-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
-
Kunihiko Hayashi authored
Add SoC-glue clock source selector for ahci controller on UniPhier SoCs. Currently this supports Pro4 only. Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1634000035-3114-6-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by:
-
Kunihiko Hayashi authored
Update binding document for clocks implemented in SoC-glue. Signed-off-by:
-
Kunihiko Hayashi authored
Add basic clock data for UniPhier NX1 SoC. This includes PLL and clock division data for cpufreq support. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Kunihiko Hayashi authored
Update clock binding document for UniPhier NX1 SoC. Signed-off-by:
-
Kunihiko Hayashi authored
Add clocks for audio subsystem (AIO) and video input subsystem (EXIV) on UniPhier PXs3 SoC. Signed-off-by:
-
Jens Renner authored
Silicon Labs is now part of Skyworks Inc. so update the URLs to the datasheet and application note. Signed-off-by:
Jens Renner <renner@efe-gmbh.de> Link: https://lore.kernel.org/r/20210913074823.115212-1-renner@efe-gmbh.de Acked-by:
-
Luca Ceresoli authored
The old .probe is "soon to be deprecated". Use the new, simpler form. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20210928095041.17116-1-luca@lucaceresoli.net Signed-off-by:
-
Mianhan Liu authored
owl-factor.c hasn't use any macro or function declared in linux/slab.h. Thus, these files can be removed from owl-factor.c safely without affecting the compilation of the ./drivers/clk module Signed-off-by:
Mianhan Liu <liumh1@shanghaitech.edu.cn> Link: https://lore.kernel.org/r/20210929065824.23691-1-liumh1@shanghaitech.edu.cn Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
-
Paul Cercueil authored
Two fixes in one: - In the "impose hardware constraints" block, the "logical" divider value (aka. not translated to the hardware) was clamped to fit in the register area, but this totally ignored the fact that the divider value can itself have a fixed divider. - The code that made sure that the divider value returned by the function was a multiple of its own fixed divider could result in a wrong value being calculated, because it was rounded down instead of rounded up. Fixes: 4afe2d1a ("clk: ingenic: Allow divider value to be divided") Co-developed-by:
Artur Rojek <contact@artur-rojek.eu> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20211001172033.122329-1-paul@crapouillou.net Signed-off-by:
-
Stephen Boyd authored
Merge branches 'clk-composite-determine-fix', 'clk-allwinner', 'clk-amlogic' and 'clk-samsung' into clk-next * clk-composite-determine-fix: clk: composite: Use rate_ops.determine_rate when also a mux is available clk: composite: Also consider .determine_rate for rate + mux composites * clk-allwinner: clk: sunxi: sun8i-apb0: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: sun6i-ar100: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: sun6i-apb0-gates: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: sun6i-apb0: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun9i-a80-usb: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun9i-a80-de: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun9i-a80: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun8i-r40: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun8i-de2: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun8i-a83t: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun50i-h6: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi-ng: ccu-sun50i-a64: Make use of the helper function devm_platform_ioremap_resource() clk: sunxi: clk-mod0: Make use of the helper function devm_platform_ioremap_resource() dt-bindings: clocks: Fix typo in the H6 compatible clk: sunxi-ng: Use a separate lock for each CCU instance clk: sunxi-ng: Prevent unbinding CCUs via sysfs clk: sunxi-ng: Unregister clocks/resets when unbinding clk: sunxi-ng: Add machine dependency to A83T CCU clk: sunxi-ng: mux: Remove unused 'reg' field * clk-amlogic: clk: meson: meson8b: Make the video clock trees mutable clk: meson: meson8b: Initialize the HDMI PLL registers clk: meson: meson8b: Add the HDMI PLL M/N parameters clk: meson: meson8b: Add the vid_pll_lvds_en gate clock clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel clk: meson: meson8b: Export the video clocks * clk-samsung: clk: samsung: describe drivers in Kconfig clk: samsung: exynos5433: update apollo and atlas clock probing clk: samsung: add support for CPU clocks clk: samsung: Introduce Exynos850 clock driver dt-bindings: clock: Document Exynos850 CMU bindings dt-bindings: clock: Add bindings definitions for Exynos850 CMU clk: samsung: clk-pll: Implement pll0831x PLL type clk: samsung: clk-pll: Implement pll0822x PLL type clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource() clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource() clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource() clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource() -
Stephen Boyd authored
* clk-imx: (21 commits) clk: imx: Make CLK_IMX8ULP select MXC_CLK clk: imx: imx6ul: Fix csi clk gate register clk: imx: imx6ul: Move csi_sel mux to correct base register clk: imx: Fix the build break when clk-imx8ulp build as module clk: imx: Add the pcc reset controller support on imx8ulp clk: imx: Add clock driver for imx8ulp clk: imx: Update the pfdv2 for 8ulp specific support clk: imx: disable the pfd when set pfdv2 clock rate clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp clk: imx: disable i.mx7ulp composite clock during initialization clk: imx: Update the compsite driver to support imx8ulp clk: imx: Update the pllv4 to support imx8ulp dt-bindings: clock: Add imx8ulp clock support clk: imx: Rework imx_clk_hw_pll14xx wrapper clk: imx: Rework all imx_clk_hw_composite wrappers clk: imx: Rework all clk_hw_register_divider wrappers clk: imx: Rework all clk_hw_register_mux wrappers clk: imx: Rework all clk_hw_register_gate2 wrappers clk: imx: Rework all clk_hw_register_gate wrappers clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones ... * clk-ux500: clk: ux500: Add driver for the reset portions of PRCC dt-bindings: clock: u8500: Rewrite in YAML and extend * clk-debugfs: clk: use clk_core_get_rate_recalc() in clk_rate_get()
-
Stephen Boyd authored
- Clock power management for new SAMA7G5 SoC - Updates to the master clock driver and sam9x60-pll to be able to use cpufreq-dt driver and avoid overclocking of CPU and MCK0 domains while changing the frequency via DVFS - Power management refinement with the use of save_context()/restore_context() on each clock driver to specify their use in case of Backup mode only * clk-leak: clk: mvebu: ap-cpu-clk: Fix a memory leak in error handling paths * clk-rockchip: clk: rockchip: use module_platform_driver_probe clk: rockchip: rk3399: expose PCLK_COREDBG_{B,L} clk: rockchip: rk3399: make CPU clocks critical * clk-renesas: clk: renesas: r8a779[56]x: Add MLP clocks clk: renesas: r9a07g044: Add SDHI clock and reset entries clk: renesas: rzg2l: Add SDHI clk mux support clk: renesas: r8a779a0: Add RPC support clk: renesas: cpg-lib: Move RPC clock registration to the library clk: renesas: r9a07g044: Add clock and reset entries for SPI Multi I/O Bus Controller clk: renesas: r8a779a0: Add Z0 and Z1 clock support clk: renesas: r9a07g044: Add GbEthernet clock/reset clk: renesas: rzg2l: Add support to handle coupled clocks clk: renesas: r9a07g044: Add ethernet clock sources clk: renesas: rzg2l: Add support to handle MUX clocks clk: renesas: r8a779a0: Add TPU clock clk: renesas: rzg2l: Fix clk status function clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical * clk-at91: clk: at91: sama7g5: set low limit for mck0 at 32KHz clk: at91: sama7g5: remove prescaler part of master clock clk: at91: clk-master: add notifier for divider clk: at91: clk-sam9x60-pll: add notifier for div part of PLL clk: at91: clk-master: fix prescaler logic clk: at91: clk-master: mask mckr against layout->mask clk: at91: clk-master: check if div or pres is zero clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL clk: at91: pmc: add sama7g5 to the list of available pmcs clk: at91: clk-master: improve readability by using local variables clk: at91: clk-master: add register definition for sama7g5's master clock clk: at91: sama7g5: add securam's peripheral clock clk: at91: pmc: execute suspend/resume only for backup mode clk: at91: re-factor clocks suspend/resume clk: at91: check pmc node status before registering syscore ops -
Stephen Boyd authored
- Use ARRAY_SIZE in qcom clk drivers - Remove some impractical fallback parent names in qcom clk drivers - GCC and RPMcc support for Qualcomm QCM2290 SoCs - GCC support for Qualcomm MSM8994/MSM8992 SoCs - LPASSCC and CAMCC support for Qualcomm SC7280 SoCs - Support for Mediatek MT8195 SoCs - Make Mediatek clk drivers tristate * clk-qcom: (44 commits) clk: qcom: gdsc: enable optional power domain support clk: qcom: videocc-sm8250: use runtime PM for the clock controller clk: qcom: dispcc-sm8250: use runtime PM for the clock controller dt-bindings: clock: qcom,videocc: add mmcx power domain dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain clk: qcom: gcc-sc7280: Drop unused array clk: qcom: camcc: Add camera clock controller driver for SC7280 dt-bindings: clock: Add YAML schemas for CAMCC clocks on SC7280 clk: qcom: Add lpass clock controller driver for SC7280 dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280 clk: qcom: Kconfig: Sort the symbol for SC_LPASS_CORECC_7180 clk: qcom: mmcc-sdm660: Add hw_ctrl flag to venus_core0_gdsc clk: qcom: mmcc-sdm660: Add necessary CXCs to venus_gdsc clk: qcom: gcc-msm8994: Use ARRAY_SIZE() for num_parents clk: qcom: gcc-msm8994: Add proper msm8992 support clk: qcom: gcc-msm8994: Add modem reset clk: qcom: gcc-msm8994: Remove the inexistent GDSC_PCIE clk: qcom: gcc-msm8994: Add missing clocks clk: qcom: gcc-msm8994: Add missing NoC clocks clk: qcom: gcc-msm8994: Fix up SPI QUP clocks ... * clk-mtk: (28 commits) clk: mediatek: Export clk_ops structures to modules clk: mediatek: support COMMON_CLK_MT6779 module build clk: mediatek: support COMMON_CLK_MEDIATEK module build clk: composite: export clk_register_composite clk: mediatek: Add MT8195 apusys clock support clk: mediatek: Add MT8195 imp i2c wrapper clock support clk: mediatek: Add MT8195 wpesys clock support clk: mediatek: Add MT8195 vppsys1 clock support clk: mediatek: Add MT8195 vppsys0 clock support clk: mediatek: Add MT8195 vencsys clock support clk: mediatek: Add MT8195 vdosys1 clock support clk: mediatek: Add MT8195 vdosys0 clock support clk: mediatek: Add MT8195 vdecsys clock support clk: mediatek: Add MT8195 scp adsp clock support clk: mediatek: Add MT8195 mfgcfg clock support clk: mediatek: Add MT8195 ipesys clock support clk: mediatek: Add MT8195 imgsys clock support clk: mediatek: Add MT8195 ccusys clock support clk: mediatek: Add MT8195 camsys clock support clk: mediatek: Add MT8195 infrastructure clock support ... * clk-versatile: clk: versatile: hide clock drivers from non-ARM users clk: versatile: Rename ICST to CLK_ICST clk: versatile: clk-icst: Support 'reg' in addition to 'vco-offset' for register address dt-bindings: clock: arm,syscon-icst: Use 'reg' instead of 'vco-offset' for VCO register address * clk-doc: dt-bindings: clk: fixed-mmio-clock: Convert to YAML
-
- Oct 27, 2021
-
-
Claudiu Beznea authored
In case clock flags contains CLK_GET_RATE_NOCACHE the clk_rate_get() will return the cached rate. Thus, use clk_core_get_rate_recalc() which takes proper action when clock flags contains CLK_GET_RATE_NOCACHE. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-16-claudiu.beznea@microchip.com Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> [sboyd@kernel.org: Grab prepare lock around operation] Signed-off-by:
-
Claudiu Beznea authored
MCK0 could go as low as 32KHz. Set this limit. Signed-off-by:
-
Claudiu Beznea authored
On SAMA7G5 the prescaler part of master clock has been implemented as a changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has been discovered that in some conditions the PMC_SR.MCKRDY is not rising but the rate it provides it's stable. The workaround is to add a timeout when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler will be removed from Linux clock tree as all the frequencies for CPU could be obtained from PLL and also there will be less overhead when changing frequency via DVFS. Signed-off-by:
-
Claudiu Beznea authored
SAMA7G5 supports DVFS by changing cpuck. On SAMA7G5 mck0 shares the same parent with cpuck as seen in the following clock tree: +----------> cpuck | FRAC PLL ---> DIV PLL -+-> DIV ---> mck0 mck0 could go b/w 32KHz and 200MHz on SAMA7G5. To avoid mck0 overclocking while changing FRAC PLL or DIV PLL the commit implements a notifier for mck0 which applies a safe divider to register (maximum value of the divider which is 5) on PRE_RATE_CHANGE events (such that changes on PLL to not overclock mck0) and sets the maximum allowed rate on POST_RATE_CHANGE events. Signed-off-by: -
Claudiu Beznea authored
SAM9X60's PLL which is also part of SAMA7G5 is composed of 2 parts: one fractional part and one divider. On SAMA7G5 the CPU PLL could be changed at run-time to implement DVFS. The hardware clock tree on SAMA7G5 for CPU PLL is as follows: +---- div1 ----------------> cpuck | FRAC PLL ---> DIV PLL -+-> prescaler ---> div0 ---> mck0 The div1 block is not implemented in Linux; on prescaler block it has been discovered a bug on some scenarios and will be removed from Linux in next commits. Thus, the final clock tree that will be used in Linux will be as follows: +-----------> cpuck | FRAC PLL ---> DIV PLL -+-> div0 ---> mck0 It has been proposed in [1] to not introduce a new CPUFreq driver but to overload the proper clock drivers with proper operation such that cpufreq-dt to be used. To accomplish this DIV PLL and div0 implement clock notifiers which applies safe dividers before FRAC PLL is changed. The current commit treats only the DIV PLL by adding a notifier that sets a safe divider on PRE_RATE_CHANGE events. The safe divider is provided by initialization clock code (sama7g5.c). The div0 is treated in next commits (to keep the changes as clean as possible). [1] https://lore.kernel.org/lkml/20210105104426.4tmgc2l3vyicwedd@vireshk-i7/ Signed-off-by: -
Claudiu Beznea authored
When prescaler value read from register is MASTER_PRES_MAX it means that the input clock will be divided by 3. Fix the code to reflect this. Fixes: 7a110b91 ("clk: at91: clk-master: re-factor master clock") Signed-off-by:
-
Claudiu Beznea authored
Mask values read/written from/to MCKR against layout->mask as this mask may be different b/w PMC versions. Signed-off-by:
-
Claudiu Beznea authored
Check if div or pres is zero before using it as argument for ffs(). In case div is zero ffs() will return 0 and thus substracting from zero will lead to invalid values to be setup in registers. Fixes: 7a110b91 ("clk: at91: clk-master: re-factor master clock") Fixes: 75c88143 ("clk: at91: clk-master: add master clock support for SAMA7G5") Signed-off-by:
-
Claudiu Beznea authored
Use DIV_ROUND_CLOSEST_ULL() to avoid any inconsistency b/w the rate computed in sam9x60_frac_pll_recalc_rate() and the one computed in sam9x60_frac_pll_compute_mul_frac(). Fixes: 43b1bb4a ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Signed-off-by:
-
Claudiu Beznea authored
Add SAMA7G5 to the list of available PMCs such that the suspend/resume code for clocks to be used on backup mode. Signed-off-by:
-
Claudiu Beznea authored
Improve readability in clk_sama7g5_master_set() by using local variables. Suggested-by:
-
Claudiu Beznea authored
SAMA7G5 has 4 master clocks (MCK1..4) which are controlled though the register at offset 0x30 (relative to PMC). In the last/first phase of suspend/resume procedure (which is architecture specific) the parent of master clocks are changed (via assembly code) for more power saving (see file arch/arm/mach-at91/pm_suspend.S, macros at91_mckx_ps_enable and at91_mckx_ps_restore). Thus the macros corresponding to register at offset 0x30 need to be shared b/w clk-master.c and pm_suspend.S. commit ec03f18c ("clk: at91: add register definition for sama7g5's master clock") introduced the proper macros but didn't adapted the clk-master.c as well. Thus, this commit adapt the clk-master.c to use the macros introduced in commit ec03f18c ("clk: at91: add register definition for sama7g5's master clock"). Signed-off-by:
-
Claudiu Beznea authored
Add SECURAM's peripheral clock. Signed-off-by:
-
Claudiu Beznea authored
Before going to backup mode architecture specific PM code sets the first word in securam (file arch/arm/mach-at91/pm.c, function at91_pm_begin()). Thus take this into account when suspending/resuming clocks. This will avoid executing unnecessary instructions when suspending to non backup modes. Signed-off-by:
-
Claudiu Beznea authored
SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where most of the SoC's components are powered off (including PMC). Resuming from this mode is done with the help of bootloader. Peripherals are not aware of the power saving mode thus most of them are disabling clocks in proper suspend API and re-enable them in resume API without taking into account the previously setup rate. Moreover some of the peripherals are acting as wakeup sources and are not disabling the clocks in this scenario, when suspending. Since backup mode cuts the power for peripherals, in resume part these clocks needs to be re-configured. The initial PMC suspend/resume code was designed only for SAMA5D2's PMC (as it was the only one supporting backup mode). SAMA7G supports also backup mode and its PMC is different (few new functionalities, different registers offsets, different offsets in registers for each functionalities). To address both SAMA5D2 and SAMA7G5 PMC add .save_context()/.resume_context() support to each clocks driver and call this from PMC driver. Signed-off-by:
-
Linus Walleij authored
The Ux500 PRCC (peripheral reset and clock controller) can also control reset of the IP blocks, not just clocks. As the PRCC is probed as a clock controller and we have other platforms implementing combined clock and reset controllers, follow this pattern and implement the PRCC rest controller as part of the clock driver. The reset controller needs to be selected from the machine as Ux500 has traditionally selected its mandatory subsystem prerequisites from there. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210921184803.1757916-2-linus.walleij@linaro.org Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> [sboyd@kernel.org: Dropped allocation error message] Signed-off-by:
-
Linus Walleij authored
This rewrites the ux500/u8500 clock bindings in YAML schema and extends them with the PRCC reset controller. The bindings are a bit idiomatic but it just reflects their age, the ux500 platform was used as guinea pig for early device tree conversion of platforms in 2015. The new subnode for the reset controller follows the pattern of the old bindings and adds a node with reset-cells for this. Cc: devicetree@vger.kernel.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Stephen Boyd authored
Merge tag 'clk-v5.16-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-samsung Pull Samsung clk driver updates from Sylwester Nawrocki: - Initial clock driver for the Exynos850 SoC - Refactoring of the CPU clock code and conversion of Exynos5433 CPU clock driver to the platform driver - A few conversions to devm_platform_ioremap_resource() - Updates of the Samsung Kconfig help text * tag 'clk-v5.16-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk: clk: samsung: describe drivers in Kconfig clk: samsung: exynos5433: update apollo and atlas clock probing clk: samsung: add support for CPU clocks clk: samsung: Introduce Exynos850 clock driver dt-bindings: clock: Document Exynos850 CMU bindings dt-bindings: clock: Add bindings definitions for Exynos850 CMU clk: samsung: clk-pll: Implement pll0831x PLL type clk: samsung: clk-pll: Implement pll0822x PLL type clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource() clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource() clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource() clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource()
-
https://github.com/BayLibre/clk-mesonStephen Boyd authored
Pull Amlogic clock driver updates from Jerome Brunet: - Update video path realted clocks for meson8 * tag 'clk-meson-v5.16-1' of https://github.com/BayLibre/clk-meson: clk: meson: meson8b: Make the video clock trees mutable clk: meson: meson8b: Initialize the HDMI PLL registers clk: meson: meson8b: Add the HDMI PLL M/N parameters clk: meson: meson8b: Add the vid_pll_lvds_en gate clock clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel clk: meson: meson8b: Export the video clocks
-
