- Jul 21, 2021
-
-
Ruslan Bilovol authored
USB Audio Class 1/2 have ability to change device's volume and mute by USB Host through class-specific control requests. Device also can notify Host about volume/mute change on its side through optional interrupt endpoint. This patch adds Volume and Mute ALSA controls which can be used by user to send and receive notifications to/from the USB Host about Volume and Mute change. These params come from f_uac* so volume and mute controls will be created only if the function support and enable each explicitly Signed-off-by:
Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by:
Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20210712125529.76070-3-pavel.hofman@ivitera.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ruslan Bilovol authored
Similar to UAC1 spec, UAC2 feature unit descriptor has variable size. Current audio-v2 feature unit descriptor structure is used for parsing descriptors, but can't be used to define your own descriptor. Add a new macro similar to what audio v1 already has. Signed-off-by:
-
Biju Das authored
Document the optional property dr_mode present on both RZ/G2 and R-Car Gen3 SoCs. It fixes the dtbs_check warning, 'dr_mode' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210630073013.22415-2-biju.das.jz@bp.renesas.com Signed-off-by:
-
Biju Das authored
Document the optional property dr_mode present on both RZ/G2 and R-Car Gen3 SoCs. It fixes dtbs_check warning, 'dr_mode' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Minas Harutyunyan authored
Add enpoint wedge support. Tested by USBCV MSC tests. Signed-off-by:
Argishti Aleksanyan <Argishti.Aleksanyan@synopsys.com> Signed-off-by:
Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/3143ea6b8eee08761709a6c2788216292be46a34.1626087390.git.Minas.Harutyunyan@synopsys.com Signed-off-by:
-
Jack Pham authored
Currently the composite driver encodes the MaxPower field of the configuration descriptor by reading the c->MaxPower of the usb_configuration only if it is non-zero, otherwise it falls back to using the value hard-coded in CONFIG_USB_GADGET_VBUS_DRAW. However, there are cases when a configuration must explicitly set bMaxPower to 0, particularly if its bmAttributes also has the Self-Powered bit set, which is a valid combination. This is specifically called out in the USB PD specification section 9.1, in which a PDUSB device "shall report zero in the bMaxPower field after negotiating a mutually agreeable Contract", and also verified by the USB Type-C Functional Test TD.4.10.2 Sink Power Precedence Test. The fix allows the c->MaxPower to be used for encoding the bMaxPower even if it is 0, if the self-powered bit is also set. An example usage of this would be for a ConfigFS gadget to be dynamically updated by userspace when the Type-C connection is determined to be operating in Power Delivery mode. Co-developed-by:
Ronak Vijay Raheja <rraheja@codeaurora.org> Acked-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210720080907.30292-1-jackp@codeaurora.org Signed-off-by:
-
Linus Walleij authored
The file is using only GPIO descriptors, so only include <linux/gpio/consumer.h> instead of the legacy include. This is a non-urgent fix. Fixes: f3ef3816 ("usb: isp1301-omap: Convert to use GPIO descriptors") Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210720200336.223398-1-linus.walleij@linaro.org Signed-off-by:
-
Moritz Fischer authored
Remove empty function renesas_xhci_pci_exit() that does not actually do anything. Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by:
Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20210718015111.389719-3-mdf@kernel.org Signed-off-by:
-
Moritz Fischer authored
Change an explicit err == 0 to !err. No functional change. Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Sergey Shtylyov authored
There is no need to call platform_get_irq() when the driver's probe() method calls usb_add_hcd() -- the platform_get_irq()'s result will have been stored already in the 'irq' local variable... Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/3e4ad969-f2ae-32f7-53fd-ea369f140703@omp.ru Signed-off-by:
-
Sandeep Maheswaram authored
Add USB nodes for sc7280 IDP board. Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Sandeep Maheswaram <sanm@codeaurora.org> Link: https://lore.kernel.org/r/1625576413-12324-4-git-send-email-sanm@codeaurora.org Signed-off-by:
-
Sandeep Maheswaram authored
Add nodes for DWC3 USB controller, QMP and HS USB PHYs in sc7280 SOC. Reviewed-by:
-
Sandeep Maheswaram authored
Add compatible for SC7280 in QMP USB3 DP PHY bindings. Reviewed-by:
-
Evgeny Novikov authored
mv_ehci_enable() did not disable and unprepare clocks in case of failures of phy_init(). Besides, it did not take into account failures of ehci_clock_enable() (in effect, failures of clk_prepare_enable()). The patch fixes both issues and gets rid of redundant wrappers around clk_prepare_enable() and clk_disable_unprepare() to simplify this a bit. Found by Linux Driver Verification project (linuxtesting.org). Acked-by:
Evgeny Novikov <novikov@ispras.ru> Link: https://lore.kernel.org/r/20210708083056.21543-1-novikov@ispras.ru Signed-off-by:
-
Maciej Żenczykowski authored
f_ncm tx timeout can call us with null skb to flush a pending frame. In this case skb is NULL to begin with but ceases to be null after dev->wrap() completes. In such a case in->maxpacket will be read, even though we've failed to check that 'in' is not NULL. Though I've never observed this fail in practice, however the 'flush operation' simply does not make sense with a null usb IN endpoint - there's nowhere to flush to... (note that we're the gadget/device, and IN is from the point of view of the host, so here IN actually means outbound...) Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210701114834.884597-6-zenczykowski@gmail.com Signed-off-by:
-
Maciej Żenczykowski authored
Since they're only used if there's an skb. Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Maciej Żenczykowski authored
the current logic is: struct sk_buff *skb2 = NULL; ... if (!skb && !ncm->skb_tx_data) return NULL; if (skb) { ... } else if (ncm->skb_tx_data) ... } return skb2; Which means that first if statement is simply not needed. Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: -
Maciej Żenczykowski authored
This condition is already checked for in ncm_wrap_ntb(), except that that check is done with eth_dev->lock held (it is grabbed by eth_start_xmit). It's best to not be reaching into ncm struct without locks held. Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Maciej Żenczykowski authored
It is equivalent to ncm->netdev being NULL. Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Maciej Żenczykowski authored
It is simply not needed. This field is equivalent to skb being NULL. Currently with the boolean set to true we call: ncm->netdev->netdev_ops->ndo_start_xmit(NULL, ncm->netdev); which calls u_ether's: eth_start_xmit(NULL, ...) which then calls: skb = dev->wrap(dev->port_usb, NULL); which calls back into f_ncm's: ncm_wrap_ntb(..., NULL) Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Kelly Devilliv authored
We should acquire the actual_length of an iso packet from the iTD directly using FOTG210_ITD_LENGTH() macro. Signed-off-by:
Kelly Devilliv <kelly.devilliv@gmail.com> Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com Signed-off-by:
-
Kelly Devilliv authored
Now that usb_endpoint_maxp() only returns the lowest 11 bits from wMaxPacketSize, we should make use of the usb_endpoint_* helpers instead and remove the unnecessary max_packet()/hb_mult() macro. Signed-off-by:
-
Kelly Devilliv authored
This reverts commit cb6a0db8 for the same reason as commit 43b78f11 in the ehci-hcd driver. Alan writes: What you can't see just from reading the patch is that in both cases (ehci->itd_pool and ehci->sitd_pool) there are two allocation paths -- the two branches of an "if" statement -- and only one of the paths calls dma_pool_[z]alloc. However, the memset is needed for both paths, and so it can't be eliminated. Given that it must be present, there's no advantage to calling dma_pool_zalloc rather than dma_pool_alloc. Signed-off-by:
-
- Jul 12, 2021
-
-
Wesley Cheng authored
Update the tx-fifo-resize property with a better description, while adding the tx-fifo-max-num, which is a new parameter allowing adjustments for the maximum number of packets the txfifo resizing logic can account for while resizing the endpoints. Reviewed-by:
Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1625908395-5498-7-git-send-email-wcheng@codeaurora.org Signed-off-by:
-
Wesley Cheng authored
In order to take advantage of the TX fifo resizing logic, manually add these properties to the DWC3 child node by default. This will allow the DWC3 gadget to resize the TX fifos for the IN endpoints, which help with performance. Signed-off-by:
-
Wesley Cheng authored
If building with OF Kconfig disabled, this can lead to errors for drivers utilizing of_add_property(). Add a stub for the add API, as it exists for the remove variant as well, and to avoid compliation issues. Also, export this API so that it can be used by modules. Signed-off-by:
-
Wesley Cheng authored
Some devices have USB compositions which may require multiple endpoints that support EP bursting. HW defined TX FIFO sizes may not always be sufficient for these compositions. By utilizing flexible TX FIFO allocation, this allows for endpoints to request the required FIFO depth to achieve higher bandwidth. With some higher bMaxBurst configurations, using a larger TX FIFO size results in better TX throughput. By introducing the check_config() callback, the resizing logic can fetch the maximum number of endpoints used in the USB composition (can contain multiple configurations), which helps ensure that the resizing logic can fulfill the configuration(s), or return an error to the gadget layer otherwise during bind time. Signed-off-by:
-
Wesley Cheng authored
Ensure that the USB gadget is able to support the configuration being added based on the number of endpoints required from all interfaces. This is for accounting for any bandwidth or space limitations. Signed-off-by:
-
Wesley Cheng authored
Some UDCs may have constraints on how many high bandwidth endpoints it can support in a certain configuration. This API allows for the composite driver to pass down the total number of endpoints to the UDC so it can verify it has the required resources to support the configuration. Signed-off-by:
-
Linus Torvalds authored
-
Hugh Dickins authored
I know nothing about zone_device pages and !device_private pages; but if try_to_migrate_one() will do nothing for them, then it's better that try_to_migrate() filter them first, than trawl through all their vmas. Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
In the unlikely race case that page_mlock_one() finds VM_LOCKED has been cleared by the time it got page table lock, page_vma_mapped_walk_done() must be called before returning, either explicitly, or by a final call to page_vma_mapped_walk() - otherwise the page table remains locked. Fixes: cd62734c ("mm/rmap: split try_to_munlock from try_to_unmap") Signed-off-by:
kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Hugh Dickins authored
The kernel recovers in due course from missing Mlocked pages: but there was no point in calling page_mlock() (formerly known as try_to_munlock()) on a THP, because nothing got done even when it was found to be mapped in another VM_LOCKED vma. It's true that we need to be careful: Mlocked accounting of pte-mapped THPs is too difficult (so consistently avoided); but Mlocked accounting of only-pmd-mapped THPs is supposed to work, even when multiple mappings are mlocked and munlocked or munmapped. Refine the tests. There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so page_mlock_one() does not even have to worry about that complication. (I said the kernel recovers: but would page reclaim be likely to split THP before rediscovering that it's VM_LOCKED? I've not followed that up) Fixes: 9a73f61b ("thp, mlock: do not mlock PTE-mapped file huge pages") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by:
-
Hugh Dickins authored
Parallel developments in mm/rmap.c have left behind some out-of-date comments: try_to_migrate_one() also accepts TTU_SYNC (already commented in try_to_migrate() itself), and try_to_migrate() returns nothing at all. TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so delete the "recently referenced" comment from try_to_unmap_one() (once upon a time the comment was near the removed codeblock, but they drifted apart). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "Two fixes: - Fix a MIPS IRQ handling RCU bug - Remove a DocBook annotation for a parameter that doesn't exist anymore" * tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry genirq/irqdesc: Drop excess kernel-doc entry @lookup -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Three fixes: - Fix load tracking bug/inconsistency - Fix a sporadic CFS bandwidth constraints enforcement bug - Fix a uclamp utilization tracking bug for newly woken tasks" * tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/uclamp: Ignore max aggregation if rq is idle sched/fair: Fix CFS bandwidth hrtimer expiry type sched/fair: Sync load_sum with load_avg after dequeue
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "A fix and a hardware-enablement addition: - Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup - Add cstate event support for Intel ICELAKE_X and ICELAKE_D" * tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Clean up error handling path of iio mapping perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: - Fix a Sparc crash - Fix a number of objtool warnings - Fix /proc/lockdep output on certain configs - Restore a kprobes fail-safe * tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomic: sparc: Fix arch_cmpxchg64_local() kprobe/static_call: Restore missing static_call_text_reserved() static_call: Fix static_call_text_reserved() vs __init jump_label: Fix jump_label_text_reserved() vs __init locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes and clean ups in the core and various drivers. The only core change in behaviour is the I/O retry for spinup notify, but that shouldn't impact anything other than the failing case" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits) scsi: virtio_scsi: Add validation for residual bytes from response scsi: ipr: System crashes when seeing type 20 error scsi: core: Retry I/O for Notify (Enable Spinup) Required error scsi: mpi3mr: Fix warnings reported by smatch scsi: qedf: Add check to synchronize abort and flush scsi: MAINTAINERS: Add mpi3mr driver maintainers scsi: libfc: Fix array index out of bound exception scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro scsi: qedf: Use DEVICE_ATTR_RO() macro scsi: qedi: Use DEVICE_ATTR_RO() macro scsi: message: mptfc: Switch from pci_ to dma_ API scsi: be2iscsi: Fix some missing space in some messages scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe() scsi: ufs: Fix build warning without CONFIG_PM scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment scsi: qla2xxx: Add heartbeat check scsi: virtio_scsi: Do not overwrite SCSI status scsi: libsas: Add LUN number check in .slave_alloc callback scsi: core: Inline scsi_mq_alloc_queue() ...
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tool updates from Arnaldo Carvalho de Melo: "New features: - Enable use of BPF counters with 'perf stat --for-each-cgroup', using per-CPU 'cgroup-switch' events with an attached BPF program that does aggregation per-cgroup in the kernel instead of using per-cgroup perf events. - Add Topdown metrics L2 events as default events in 'perf stat' for systems having those events. Hardware tracing: - Add a config for max loops without consuming a packet in the Intel PT packet decoder, set via 'perf config intel-pt.max-loops=N' Hardware enablement: - Disable misleading NMI watchdog message in 'perf stat' on hybrid systems such as Intel Alder Lake. - Add a dummy event on hybrid systems to collect metadata records. - Add 24x7 nest metric events for the Power10 platform. Fixes: - Fix event parsing for PMUs starting with the same prefix. - Fix the 'perf trace' 'trace' alias installation dir. - Fix buffer size to report iregs in perf script python scripts, supporting the extended registers in PowerPC. - Fix overflow in elf_sec__is_text(). - Fix 's' on source line when disasm is empty in the annotation TUI, accessible via 'perf annotate', 'perf report' and 'perf top'. - Plug leaks in scandir() returned dirent entries in 'perf test' when sorting the shell tests. - Fix --task and --stat with pipe input in 'perf report'. - Fix 'perf probe' use of debuginfo files by build id. - If a DSO has both dynsym and symtab ELF sections, read from both when loading the symbol table, fixing a problem processing Fedora 32 glibc DSOs. Libraries: - Add grouping of events to libperf, from code in tools/perf, allowing libperf users to use that mode. Misc: - Filter plt stubs from the 'perf probe --functions' output. - Update UAPI header copies for asound, DRM, mman-common.h and the ones affected by the quotactl_fd syscall" * tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits) perf test: Add free() calls for scandir() returned dirent entries libperf: Add tests for perf_evlist__set_leader() libperf: Remove BUG_ON() from library code in get_group_fd() libperf: Add group support to perf_evsel__open() perf tools: Fix pattern matching for same substring in different PMU type perf record: Add a dummy event on hybrid systems to collect metadata records perf stat: Add Topdown metrics L2 events as default events libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader() libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups libperf: Move 'leader' from tools/perf to perf_evsel::leader libperf: Move 'idx' from tools/perf to perf_evsel::idx libperf: Change tests to single static and shared binaries perf intel-pt: Add a config for max loops without consuming a packet perf stat: Disable the NMI watchdog message on hybrid perf vendor events power10: Adds 24x7 nest metric events for power10 platform perf script python: Fix buffer size to report iregs in perf script perf trace: Fix the perf trace link location perf top: Fix overflow in elf_sec__is_text() perf annotate: Fix 's' on source line when disasm is empty perf probe: Do not show @plt function by default ...
-
