When we send broadcasts in clusters of more 70-80 nodes, we sometimes
see the broadcast link resetting because of an excessive number of
retransmissions. This is caused by a combination of two factors:

1) A 'NACK crunch", where loss of broadcast packets is discovered
   and NACK'ed by several nodes simultaneously, leading to multiple
   redundant broadcast retransmissions.

2) The fact that the NACKS as such also are sent as broadcast, leading
   to excessive load and packet loss on the transmitting switch/bridge.

This commit deals with the latter problem, by moving sending of
broadcast nacks from the dedicated BCAST_PROTOCOL/NACK message type
to regular unicast LINK_PROTOCOL/STATE messages. We allocate 10 unused
bits in word 8 of the said message for this purpose, and introduce a
new capability bit, TIPC_BCAST_STATE_NACK in order to keep the change
backwards compatible.

Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the gmac power domain support for rk3399, in order to save more
power consumption.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GMAC Power Domain(PD) will be disabled during suspend.
That will causes GRF registers reset.
So corresponding GRF registers for GMAC must be setup again.

Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add constants and callback functions for the dwmac on rk3228/rk3229 socs.
As can be seen, the base structure is the same, only registers and the
bits in them moved slightly.

Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the retun value of switchdev_port_fdb_dump() when
CONFIG_NET_SWITCHDEV is not set. This avoids getting "warning: return makes
integer from pointer without a cast [-Wint-conversion]" when building
when CONFIG_NET_SWITCHDEV is not set under several compiler versions.
This warning is due to commit d297653d


("rtnetlink: fdb dump: optimize by saving last interface markers").

Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
perf, bpf: add support for bpf in sw/hw perf_events

this patch set is a follow up to the discussion:
https://lkml.kernel.org/r/20160804142853.GO6862%20()%20twins%20!%20programming%20!%20kicks-ass%20!%20net


It turned out to be simpler than what we discussed.

Patches 1-3 is bpf-side prep for the main patch 4
that adds bpf program as an overflow_handler to sw and hw perf_events.

Patches 5 and 6 are examples from myself and Brendan.

Peter,
to implement your suggestion to add ifdef CONFIG_BPF_SYSCALL
inside struct perf_event, I had to shuffle ifdefs in events/core.c
Please double check whether that is what you wanted to see.

v2->v3: fixed few more minor issues
v1->v2: fixed issues spotted by Peter and Daniel.
====================

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sample instruction pointer and frequency count in a BPF map

Signed-off-by: Brendan Gregg <bgregg@netflix.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bpf program is called 50 times a second and does hashmap[kern&user_stackid]++
It's primary purpose to check that key bpf helpers like map lookup, update,
get_stackid, trace_printk and ctx access are all working.
It checks:
- PERF_COUNT_HW_CPU_CYCLES on all cpus
- PERF_COUNT_HW_CPU_CYCLES for current process and inherited perf_events to children
- PERF_COUNT_SW_CPU_CLOCK on all cpus
- PERF_COUNT_SW_CPU_CLOCK for current process

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow attaching BPF_PROG_TYPE_PERF_EVENT programs to sw and hw perf events
via overflow_handler mechanism.
When program is attached the overflow_handlers become stacked.
The program acts as a filter.
Returning zero from the program means that the normal perf_event_output handler
will not be called and sampling event won't be stored in the ring buffer.

The overflow_handler_context==NULL is an additional safety check
to make sure programs are not attached to hw breakpoints and watchdog
in case other checks (that prevent that now anyway) get accidentally
relaxed in the future.

The program refcnt is incremented in case perf_events are inhereted
when target task is forked.
Similar to kprobe and tracepoint programs there is no ioctl to
detach the program or swap already attached program. The user space
expected to close(perf_event_fd) like it does right now for kprobe+bpf.
That restriction simplifies the code quite a bit.

The invocation of overflow_handler in __perf_event_overflow() is now
done via READ_ONCE, since that pointer can be replaced when the program
is attached while perf_event itself could have been active already.
There is no need to do similar treatment for event->prog, since it's
assigned only once before it's accessed.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure that BPF_PROG_TYPE_PERF_EVENT programs only use
preallocated hash maps, since doing memory allocation
in overflow_handler can crash depending on where nmi got triggered.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce BPF_PROG_TYPE_PERF_EVENT programs that can be attached to
HW and SW perf events (PERF_TYPE_HARDWARE and PERF_TYPE_SOFTWARE
correspondingly in uapi/linux/perf_event.h)

The program visible context meta structure is
struct bpf_perf_event_data {
    struct pt_regs regs;
     __u64 sample_period;
};
which is accessible directly from the program:
int bpf_prog(struct bpf_perf_event_data *ctx)
{
  ... ctx->sample_period ...
  ... ctx->regs.ip ...
}

The bpf verifier rewrites the accesses into kernel internal
struct bpf_perf_event_data_kern which allows changing
struct perf_sample_data without affecting bpf programs.
New fields can be added to the end of struct bpf_perf_event_data
in the future.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The verifier supported only 4-byte metafields in
struct __sk_buff and struct xdp_md. The metafields in upcoming
struct bpf_perf_event are 8-byte to match register width in struct pt_regs.
Teach verifier to recognize 8-byte metafield access.
The patch doesn't affect safety of sockets and xdp programs.
They check for 4-byte only ctx access before these conditions are hit.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get a few warnings when building kernel with W=1:
drivers/isdn/hardware/mISDN/hfcmulti.c:568:1: warning: no previous declaration for 'enablepcibridge' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:574:1: warning: no previous declaration for 'disablepcibridge' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:580:1: warning: no previous declaration for 'readpcibridge' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:608:1: warning: no previous declaration for 'writepcibridge' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:638:1: warning: no previous declaration for 'cpld_set_reg' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:645:1: warning: no previous declaration for 'cpld_write_reg' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:657:1: warning: no previous declaration for 'cpld_read_reg' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:674:1: warning: no previous declaration for 'vpm_write_address' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:681:1: warning: no previous declaration for 'vpm_read_address' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:695:1: warning: no previous declaration for 'vpm_in' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:716:1: warning: no previous declaration for 'vpm_out' [-Wmissing-declarations]
drivers/isdn/hardware/mISDN/hfcmulti.c:1028:1: warning: no previous declaration for 'plxsd_checksync' [-Wmissing-declarations]
....

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the Qualcomm Technologies, Inc. EMAC gigabit Ethernet
controller.

This driver supports the following features:
1) Checksum offload.
2) Interrupt coalescing support.
3) SGMII phy.
4) phylib interface for external phy

Based on original work by
	Niranjana Vishwanathapura <nvishwan@codeaurora.org>
	Gilad Avidov <gavidov@codeaurora.org>

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Access the priv member of the dsa_switch structure directly, instead of
having an unnecessary helper.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
net: bridge: add per-port unknown multicast flood control

The first patch prepares the forwarding path by having the exact packet
type passed down so we can later filter based on it and the per-port
unknown mcast flood flag introduced in the second patch. It is similar to
how the per-port unknown unicast flood flag works.
Nice side-effects of patch 01 are the slight reduction of tests in the
fast-path and a few minor checkpatch fixes.

v3: don't change br_auto_mask as that will change user-visible behaviour
v2: make pkt_type an enum as per Stephen's comment
====================

Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a per-port flag to control the unknown multicast flood, similar to the
unknown unicast flood flag and break a few long lines in the netlink flag
exports.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the unicast flag and introduce an exact pkt_type. That would help us
for the upcoming per-port multicast flood flag and also slightly reduce the
tests in the input fast path.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fdb dumps spanning multiple skb's currently restart from the first
interface again for every skb. This results in unnecessary
iterations on the already visited interfaces and their fdb
entries. In large scale setups, we have seen this to slow
down fdb dumps considerably. On a system with 30k macs we
see fdb dumps spanning across more than 300 skbs.

To fix the problem, this patch replaces the existing single fdb
marker with three markers: netdev hash entries, netdevs and fdb
index to continue where we left off instead of restarting from the
first netdev. This is consistent with link dumps.

In the process of fixing the performance issue, this patch also
re-implements fix done by
commit 472681d5

 ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump")
(with an internal fix from Wilson Kok) in the following ways:
- change ndo_fdb_dump handlers to return error code instead
of the last fdb index
- use cb->args strictly for dump frag markers and not error codes.
This is consistent with other dump functions.

Below results were taken on a system with 1000 netdevs
and 35085 fdb entries:
before patch:
$time bridge fdb show | wc -l
15065

real    1m11.791s
user    0m0.070s
sys 1m8.395s

(existing code does not return all macs)

after patch:
$time bridge fdb show | wc -l
35085

real    0m2.017s
user    0m0.113s
sys 0m1.942s

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the const for the parameter of flow_keys_have_l4 for the readability.

Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't expose skbs to in-kernel users, such as the AFS filesystem, but
instead provide a notification hook the indicates that a call needs
attention and another that indicates that there's a new call to be
collected.

This makes the following possibilities more achievable:

 (1) Call refcounting can be made simpler if skbs don't hold refs to calls.

 (2) skbs referring to non-data events will be able to be freed much sooner
     rather than being queued for AFS to pick up as rxrpc_kernel_recv_data
     will be able to consult the call state.

 (3) We can shortcut the receive phase when a call is remotely aborted
     because we don't have to go through all the packets to get to the one
     cancelling the operation.

 (4) It makes it easier to do encryption/decryption directly between AFS's
     buffers and sk_buffs.

 (5) Encryption/decryption can more easily be done in the AFS's thread
     contexts - usually that of the userspace process that issued a syscall
     - rather than in one of rxrpc's background threads on a workqueue.

 (6) AFS will be able to wait synchronously on a call inside AF_RXRPC.

To make this work, the following interface function has been added:

     int rxrpc_kernel_recv_data(
		struct socket *sock, struct rxrpc_call *call,
		void *buffer, size_t bufsize, size_t *_offset,
		bool want_more, u32 *_abort_code);

This is the recvmsg equivalent.  It allows the caller to find out about the
state of a specific call and to transfer received data into a buffer
piecemeal.

afs_extract_data() and rxrpc_kernel_recv_data() now do all the extraction
logic between them.  They don't wait synchronously yet because the socket
lock needs to be dealt with.

Five interface functions have been removed:

	rxrpc_kernel_is_data_last()
    	rxrpc_kernel_get_abort_code()
    	rxrpc_kernel_get_error_number()
    	rxrpc_kernel_free_skb()
    	rxrpc_kernel_data_consumed()

As a temporary hack, sk_buffs going to an in-kernel call are queued on the
rxrpc_call struct (->knlrecv_queue) rather than being handed over to the
in-kernel user.  To process the queue internally, a temporary function,
temp_deliver_data() has been added.  This will be replaced with common code
between the rxrpc_recvmsg() path and the kernel_rxrpc_recv_data() path in a
future patch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The workqueue "pegasus_workqueue" queues a single work item per pegasus
instance and hence it doesn't require execution ordering. Hence,
alloc_workqueue has been used to replace the deprecated
create_singlethread_workqueue instance.

The WQ_MEM_RECLAIM flag has been set to ensure forward progress under
memory pressure since it's a network driver.

Since there are fixed number of work items, explicit concurrency
limit is unnecessary here.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Petko Manolov <petkan@mip-labs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces
deprecated create_singlethread_workqueue(). This is the identity
conversion.

The workqueue "wq" queues multiple work items viz
&bond->mcast_work, &nnw->work, &bond->mii_work, &bond->arp_work,
&bond->alb_work, &bond->mii_work, &bond->ad_work, &bond->slave_arr_work
which require strict execution ordering. Hence, an ordered dedicated
workqueue has been used.

Since, it is a network driver, WQ_MEM_RECLAIM has been set to
ensure forward progress under memory pressure.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the sky2 driver to pass number of packets done to NAPI.
The driver was never updated when napi_complete_done was added.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexandre TORGUE says:

====================
Add Ethernet support on STM32F429

STM32F429 Chip embeds a Synopsys 3.50a MAC IP.

This series enhance current stmmac driver to control it (code already
available) and adds basic glue for STM32F429 chip.

Changes since v5:
 -Fix typo in bindings documentation patch.
 -Change clocks names in stm32-dwmac glue driver / Documentation.
 -After rebase, stm32 ethernet node is now available. It has to be updated
according to new clocks names.

Changes since v4:
 -Fix dirty copy/past in bindings documentation patch.

Changes since v3:
 -Fix "tx-clk" and "rx-clk" as required clocks. Driver and bindings are
modified.

Changes since v2:
 -Fix alphabetic order in Kconfig and Makefile.
 -Improve code according to Joachim review.
 -Binding: remove useless entry.

Changes since v1:
 -Fix Kbuild issue in Kconfig.
 -Remove init/exit callbacks. Suspend/Resume and remove driver is no more
driven in stmmac_pltfr but directly in dwmac-stm32 glue driver.
 -Take into account Joachim review.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support of Synopsys 3.50a MAC IP in stmmac driver.

Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stm324xx family chips support Synopsys MAC 3.510 IP.
This patch adds settings for logical glue logic:
-clocks
-mode selection MII or RMII.

Reviewed-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

return at end of function is useless.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

A bugfix for backward compatibility handling introduced undefined
behavior for the case that of_parse_phandle() does not return
a valid entry, as "gcc -Wmaybe-unused" reports:

drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect':
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:776:6: error: 'phy_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_mdio_config':
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:776:6: error: 'phy_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized]

We can work around this by removing the check for zero "np", as
of_phy_connect() will correctly handle a NULL argument so we fall
back into the normal error handling case.

Note that I had previously fixed another bug that resulted in the
exact same warning, but this is a different problem that was
introduced after my original fix.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 03377e38

 ("drivers: net: xgene: Fix backward compatibility")
Signed-off-by: David S. Miller <davem@davemloft.net>

check the coding style with checkpatch.pl and fix the warnings and errors.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Robert Foss says:

====================
net/usb: asix driver improvements

This is a resubmission of v3, since the netdev
mailinlist was not sent the previous submission.

This series improves power management of the asix driver.

 - Suspend/resume support is improved to save needed registers.
 - Device disconnection is improved.
 - Fixes AX88772x resume failures
 - Implementes IEEE 802.3 spec section "22.2.4.1.1 Reset" correctly
 - Fixes AX_CMD_WRITE_MEDIUM_MODE being set incorrectly

Changes since v1:
- Added proper metadata tags to series.
- Added two more patches to series.

Changes since v2:
- Added coverletter
- Tested patches on AX88772A/AX88772B/AX88178/AX88179 hardware
====================

Signed-off-by: David S. Miller <davem@davemloft.net>