Commit fb97f631 authored May 25, 2021 by Grygorii Strashko Committed by Tony Lindgren May 27, 2021

ARM: dts: am335x: align GPIO hog names with dt-schema



The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

parent 3d7bf585

arch/arm/boot/dts/am335x-boneblack-wireless.dts

+1 −1

Original line number	Diff line number	Diff line
		@@ -101,7 +101,7 @@ bluetooth {
		};

		&gpio3 {
		ls_buf_en {
		ls-buf-en-hog {
		gpio-hog;
		gpios = <10 GPIO_ACTIVE_HIGH>;
		output-high;

arch/arm/boot/dts/am335x-boneblue.dts

+1 −1

Original line number	Diff line number	Diff line
		@@ -436,7 +436,7 @@ &dcan1 {
		};

		&gpio3 {
		ls_buf_en {
		ls-buf-en-hog {
		gpio-hog;
		gpios = <10 GPIO_ACTIVE_HIGH>;
		output-high;

arch/arm/boot/dts/am335x-bonegreen-wireless.dts

+2 −2

Original line number	Diff line number	Diff line
		@@ -101,7 +101,7 @@ bluetooth {
		};

		&gpio1 {
		ls_buf_en {
		ls-buf-en-hog {
		gpio-hog;
		gpios = <29 GPIO_ACTIVE_HIGH>;
		output-high;
		@@ -118,7 +118,7 @@ ls_buf_en {
		/* an external pulldown on U21 pin 4. */

		&gpio3 {
		bt_aud_in {
		bt-aud-in-hog {
		gpio-hog;
		gpios = <16 GPIO_ACTIVE_HIGH>;
		output-low;

arch/arm/boot/dts/am335x-icev2.dts

+2 −2

Original line number	Diff line number	Diff line
		@@ -458,14 +458,14 @@ &uart3 {
		};

		&gpio3 {
		p4 {
		pr1-mii-ctl-hog {
		gpio-hog;
		gpios = <4 GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "PR1_MII_CTRL";
		};

		p10 {
		mux-mii-hog {
		gpio-hog;
		gpios = <10 GPIO_ACTIVE_HIGH>;
		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */

arch/arm/boot/dts/am335x-shc.dts

+4 −4

Original line number	Diff line number	Diff line
		@@ -140,14 +140,14 @@ ehrpwm1: pwm@200 {
		};

		&gpio1 {
		hmtc_rst {
		hmtc-rst-hog {
		gpio-hog;
		gpios = <24 GPIO_ACTIVE_LOW>;
		output-high;
		line-name = "homematic_reset";
		};

		hmtc_prog {
		hmtc-prog-hog {
		gpio-hog;
		gpios = <27 GPIO_ACTIVE_LOW>;
		output-high;
		@@ -156,14 +156,14 @@ hmtc_prog {
		};

		&gpio3 {
		zgb_rst {
		zgb-rst-hog {
		gpio-hog;
		gpios = <18 GPIO_ACTIVE_LOW>;
		output-low;
		line-name = "zigbee_reset";
		};

		zgb_boot {
		zgb-boot-hog {
		gpio-hog;
		gpios = <19 GPIO_ACTIVE_HIGH>;
		output-high;