Commit e55c90c8 authored by Martin Kepplinger's avatar Martin Kepplinger Committed by Mauro Carvalho Chehab
Browse files

media: imx: imx7-media-csi: add support for imx8mq 



Modeled after the NXP driver mx6s_capture.c that this driver is based on,
imx8mq needs different settings for the baseaddr_switch mechanism. Define
the needed bits and set that for imx8mq.

Without these settings, the system will "sometimes" hang completely when
starting to stream (the interrupt will never be called).

Signed-off-by: default avatarMartin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: default avatarRui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent c8c80c99

drivers/staging/media/imx/imx7-media-csi.c

+30 −2
Original line number Diff line number Diff line
@@ -12,6 +12,7 @@ 
#include <linux/interrupt.h>

#include <linux/mfd/syscon.h>

#include <linux/module.h>

#include <linux/of_device.h>

#include <linux/of_graph.h>

#include <linux/pinctrl/consumer.h>

#include <linux/platform_device.h>
@@ -122,6 +123,10 @@ 
#define BIT_DATA_FROM_MIPI		BIT(22)

#define BIT_MIPI_YU_SWAP		BIT(21)

#define BIT_MIPI_DOUBLE_CMPNT		BIT(20)

#define BIT_MASK_OPTION_FIRST_FRAME	(0 << 18)

#define BIT_MASK_OPTION_CSI_EN		(1 << 18)

#define BIT_MASK_OPTION_SECOND_FRAME	(2 << 18)

#define BIT_MASK_OPTION_ON_DATA		(3 << 18)

#define BIT_BASEADDR_CHG_ERR_EN		BIT(9)

#define BIT_BASEADDR_SWITCH_SEL		BIT(5)

#define BIT_BASEADDR_SWITCH_EN		BIT(4)
@@ -154,6 +159,11 @@ 
#define CSI_CSICR18			0x48

#define CSI_CSICR19			0x4c



enum imx_csi_model {

	IMX7_CSI_IMX7 = 0,

	IMX7_CSI_IMX8MQ,

};



struct imx7_csi {

	struct device *dev;

	struct v4l2_subdev sd;
@@ -189,6 +199,8 @@ struct imx7_csi { 
	bool is_csi2;



	struct completion last_eof_completion;



	enum imx_csi_model model;

};



static struct imx7_csi *
@@ -537,6 +549,16 @@ static void imx7_csi_deinit(struct imx7_csi *csi, 
	clk_disable_unprepare(csi->mclk);

}



static void imx7_csi_baseaddr_switch_on_second_frame(struct imx7_csi *csi)

{

	u32 cr18 = imx7_csi_reg_read(csi, CSI_CSICR18);



	cr18 |= BIT_BASEADDR_SWITCH_EN | BIT_BASEADDR_SWITCH_SEL |

		BIT_BASEADDR_CHG_ERR_EN;

	cr18 |= BIT_MASK_OPTION_SECOND_FRAME;

	imx7_csi_reg_write(csi, cr18, CSI_CSICR18);

}



static void imx7_csi_enable(struct imx7_csi *csi)

{

	/* Clear the Rx FIFO and reflash the DMA controller. */
@@ -552,6 +574,9 @@ static void imx7_csi_enable(struct imx7_csi *csi) 
	/* Enable the RxFIFO DMA and the CSI. */

	imx7_csi_dmareq_rff_enable(csi);

	imx7_csi_hw_enable(csi);



	if (csi->model == IMX7_CSI_IMX8MQ)

		imx7_csi_baseaddr_switch_on_second_frame(csi);

}



static void imx7_csi_disable(struct imx7_csi *csi)
@@ -1155,6 +1180,8 @@ static int imx7_csi_probe(struct platform_device *pdev) 
	if (IS_ERR(csi->regbase))

		return PTR_ERR(csi->regbase);



	csi->model = (enum imx_csi_model)(uintptr_t)of_device_get_match_data(&pdev->dev);



	spin_lock_init(&csi->irqlock);

	mutex_init(&csi->lock);
@@ -1249,8 +1276,9 @@ static int imx7_csi_remove(struct platform_device *pdev) 
}



static const struct of_device_id imx7_csi_of_match[] = {

	{ .compatible = "fsl,imx7-csi" },

	{ .compatible = "fsl,imx6ul-csi" },

	{ .compatible = "fsl,imx8mq-csi", .data = (void *)IMX7_CSI_IMX8MQ },

	{ .compatible = "fsl,imx7-csi", .data = (void *)IMX7_CSI_IMX7 },

	{ .compatible = "fsl,imx6ul-csi", .data = (void *)IMX7_CSI_IMX7 },

	{ },

};

MODULE_DEVICE_TABLE(of, imx7_csi_of_match);