Loading include/linux/ethtool.h +35 −45 Original line number Diff line number Diff line Loading @@ -683,63 +683,53 @@ void ethtool_ntuple_flush(struct net_device *dev); bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported); /** * ðtool_ops - Alter and report network device settings * get_settings: Get device-specific settings * set_settings: Set device-specific settings * get_drvinfo: Report driver information * get_regs: Get device registers * get_wol: Report whether Wake-on-Lan is enabled * set_wol: Turn Wake-on-Lan on or off * get_msglevel: Report driver message level * set_msglevel: Set driver message level * nway_reset: Restart autonegotiation * get_link: Get link status * get_eeprom: Read data from the device EEPROM * set_eeprom: Write data to the device EEPROM * get_coalesce: Get interrupt coalescing parameters * set_coalesce: Set interrupt coalescing parameters * get_ringparam: Report ring sizes * set_ringparam: Set ring sizes * get_pauseparam: Report pause parameters * set_pauseparam: Set pause parameters * get_rx_csum: Report whether receive checksums are turned on or off * set_rx_csum: Turn receive checksum on or off * get_tx_csum: Report whether transmit checksums are turned on or off * set_tx_csum: Turn transmit checksums on or off * get_sg: Report whether scatter-gather is enabled * set_sg: Turn scatter-gather on or off * get_tso: Report whether TCP segmentation offload is enabled * set_tso: Turn TCP segmentation offload on or off * get_ufo: Report whether UDP fragmentation offload is enabled * set_ufo: Turn UDP fragmentation offload on or off * self_test: Run specified self-tests * get_strings: Return a set of strings that describe the requested objects * phys_id: Identify the device * get_stats: Return statistics about the device * get_flags: get 32-bit flags bitmap * set_flags: set 32-bit flags bitmap * * Description: * * get_settings: * struct ethtool_ops - Alter and report network device settings * @get_settings: Get device-specific settings. * @get_settings is passed an ðtool_cmd to fill in. It returns * an negative errno or zero. * * set_settings: * @set_settings: Set device-specific settings. * @set_settings is passed an ðtool_cmd and should attempt to set * all the settings this device supports. It may return an error value * if something goes wrong (otherwise 0). * * get_eeprom: * @get_drvinfo: Report driver information * @get_regs: Get device registers * @get_wol: Report whether Wake-on-Lan is enabled * @set_wol: Turn Wake-on-Lan on or off * @get_msglevel: Report driver message level * @set_msglevel: Set driver message level * @nway_reset: Restart autonegotiation * @get_link: Get link status * @get_eeprom: Read data from the device EEPROM. * Should fill in the magic field. Don't need to check len for zero * or wraparound. Fill in the data argument with the eeprom values * from offset to offset + len. Update len to the amount read. * Returns an error or zero. * * set_eeprom: * @set_eeprom: Write data to the device EEPROM. * Should validate the magic field. Don't need to check len for zero * or wraparound. Update len to the amount written. Returns an error * or zero. * @get_coalesce: Get interrupt coalescing parameters * @set_coalesce: Set interrupt coalescing parameters * @get_ringparam: Report ring sizes * @set_ringparam: Set ring sizes * @get_pauseparam: Report pause parameters * @set_pauseparam: Set pause parameters * @get_rx_csum: Report whether receive checksums are turned on or off * @set_rx_csum: Turn receive checksum on or off * @get_tx_csum: Report whether transmit checksums are turned on or off * @set_tx_csum: Turn transmit checksums on or off * @get_sg: Report whether scatter-gather is enabled * @set_sg: Turn scatter-gather on or off * @get_tso: Report whether TCP segmentation offload is enabled * @set_tso: Turn TCP segmentation offload on or off * @get_ufo: Report whether UDP fragmentation offload is enabled * @set_ufo: Turn UDP fragmentation offload on or off * @self_test: Run specified self-tests * @get_strings: Return a set of strings that describe the requested objects * @phys_id: Identify the device * @get_stats: Return statistics about the device * @get_flags: get 32-bit flags bitmap * @set_flags: set 32-bit flags bitmap */ struct ethtool_ops { int (*get_settings)(struct net_device *, struct ethtool_cmd *); Loading Loading
include/linux/ethtool.h +35 −45 Original line number Diff line number Diff line Loading @@ -683,63 +683,53 @@ void ethtool_ntuple_flush(struct net_device *dev); bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported); /** * ðtool_ops - Alter and report network device settings * get_settings: Get device-specific settings * set_settings: Set device-specific settings * get_drvinfo: Report driver information * get_regs: Get device registers * get_wol: Report whether Wake-on-Lan is enabled * set_wol: Turn Wake-on-Lan on or off * get_msglevel: Report driver message level * set_msglevel: Set driver message level * nway_reset: Restart autonegotiation * get_link: Get link status * get_eeprom: Read data from the device EEPROM * set_eeprom: Write data to the device EEPROM * get_coalesce: Get interrupt coalescing parameters * set_coalesce: Set interrupt coalescing parameters * get_ringparam: Report ring sizes * set_ringparam: Set ring sizes * get_pauseparam: Report pause parameters * set_pauseparam: Set pause parameters * get_rx_csum: Report whether receive checksums are turned on or off * set_rx_csum: Turn receive checksum on or off * get_tx_csum: Report whether transmit checksums are turned on or off * set_tx_csum: Turn transmit checksums on or off * get_sg: Report whether scatter-gather is enabled * set_sg: Turn scatter-gather on or off * get_tso: Report whether TCP segmentation offload is enabled * set_tso: Turn TCP segmentation offload on or off * get_ufo: Report whether UDP fragmentation offload is enabled * set_ufo: Turn UDP fragmentation offload on or off * self_test: Run specified self-tests * get_strings: Return a set of strings that describe the requested objects * phys_id: Identify the device * get_stats: Return statistics about the device * get_flags: get 32-bit flags bitmap * set_flags: set 32-bit flags bitmap * * Description: * * get_settings: * struct ethtool_ops - Alter and report network device settings * @get_settings: Get device-specific settings. * @get_settings is passed an ðtool_cmd to fill in. It returns * an negative errno or zero. * * set_settings: * @set_settings: Set device-specific settings. * @set_settings is passed an ðtool_cmd and should attempt to set * all the settings this device supports. It may return an error value * if something goes wrong (otherwise 0). * * get_eeprom: * @get_drvinfo: Report driver information * @get_regs: Get device registers * @get_wol: Report whether Wake-on-Lan is enabled * @set_wol: Turn Wake-on-Lan on or off * @get_msglevel: Report driver message level * @set_msglevel: Set driver message level * @nway_reset: Restart autonegotiation * @get_link: Get link status * @get_eeprom: Read data from the device EEPROM. * Should fill in the magic field. Don't need to check len for zero * or wraparound. Fill in the data argument with the eeprom values * from offset to offset + len. Update len to the amount read. * Returns an error or zero. * * set_eeprom: * @set_eeprom: Write data to the device EEPROM. * Should validate the magic field. Don't need to check len for zero * or wraparound. Update len to the amount written. Returns an error * or zero. * @get_coalesce: Get interrupt coalescing parameters * @set_coalesce: Set interrupt coalescing parameters * @get_ringparam: Report ring sizes * @set_ringparam: Set ring sizes * @get_pauseparam: Report pause parameters * @set_pauseparam: Set pause parameters * @get_rx_csum: Report whether receive checksums are turned on or off * @set_rx_csum: Turn receive checksum on or off * @get_tx_csum: Report whether transmit checksums are turned on or off * @set_tx_csum: Turn transmit checksums on or off * @get_sg: Report whether scatter-gather is enabled * @set_sg: Turn scatter-gather on or off * @get_tso: Report whether TCP segmentation offload is enabled * @set_tso: Turn TCP segmentation offload on or off * @get_ufo: Report whether UDP fragmentation offload is enabled * @set_ufo: Turn UDP fragmentation offload on or off * @self_test: Run specified self-tests * @get_strings: Return a set of strings that describe the requested objects * @phys_id: Identify the device * @get_stats: Return statistics about the device * @get_flags: get 32-bit flags bitmap * @set_flags: set 32-bit flags bitmap */ struct ethtool_ops { int (*get_settings)(struct net_device *, struct ethtool_cmd *); Loading
Ben Hutchings <bhutchings@solarflare.com>Ben Hutchings <bhutchings@solarflare.com>