Commit cbf05091 authored by Omar Ramirez Luna's avatar Omar Ramirez Luna Committed by Greg Kroah-Hartman
Browse files

staging: ti dspbridge: enable driver building 



Add Kconfig + Makefile for TI's DSP Bridge driver
and expose it to the staging menu.

For now, have tidspbridge depend on ARCH_OMAP3.
That dependency should be relaxed as soon as required cleanups are applied.

Signed-off-by: default avatarOmar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: default avatarKanigeri, Hari <h-kanigeri2@ti.com>
Signed-off-by: default avatarAmeya Palande <ameya.palande@nokia.com>
Signed-off-by: default avatarGuzman Lugo, Fernando <fernando.lugo@ti.com>
Signed-off-by: default avatarHebbar, Shivananda <x0hebbar@ti.com>
Signed-off-by: default avatarRamos Falcon, Ernesto <ernesto@ti.com>
Signed-off-by: default avatarFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: default avatarAnna, Suman <s-anna@ti.com>
Signed-off-by: default avatarGupta, Ramesh <grgupta@ti.com>
Signed-off-by: default avatarGomez Castellanos, Ivan <ivan.gomez@ti.com>
Signed-off-by: default avatarAndy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: default avatarArmando Uribe De Leon <x0095078@ti.com>
Signed-off-by: default avatarDeepak Chitriki <deepak.chitriki@ti.com>
Signed-off-by: default avatarMenon, Nishanth <nm@ti.com>
Signed-off-by: default avatarPhil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: default avatarOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 7454c8f6

drivers/staging/Kconfig

+2 −0
Original line number Diff line number Diff line
@@ -153,5 +153,7 @@ source "drivers/staging/easycap/Kconfig" 


source "drivers/staging/solo6x10/Kconfig"



source "drivers/staging/tidspbridge/Kconfig"



endif # !STAGING_EXCLUDE_BUILD

endif # STAGING

drivers/staging/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -57,3 +57,4 @@ obj-$(CONFIG_TOUCHSCREEN_MRSTOUCH) += mrst-touchscreen/ 
obj-$(CONFIG_MSM_STAGING)	+= msm/

obj-$(CONFIG_EASYCAP)		+= easycap/

obj-$(CONFIG_SOLO6X10)		+= solo6x10/

obj-$(CONFIG_TIDSPBRIDGE)	+= tidspbridge/

drivers/staging/tidspbridge/Kconfig

0 → 100644
+88 −0
Original line number Diff line number Diff line 
#

# DSP Bridge Driver Support

#



menuconfig TIDSPBRIDGE

	tristate "DSP Bridge driver"

	depends on ARCH_OMAP3

	select OMAP_MBOX_FWK

	help

	  DSP/BIOS Bridge is designed for platforms that contain a GPP and

	  one or more attached DSPs.  The GPP is considered the master or

	  "host" processor, and the attached DSPs are processing resources

	  that can be utilized by applications and drivers running on the GPP.



	  This driver depends on OMAP Mailbox (OMAP_MBOX_FWK).



config BRIDGE_DVFS

	bool "Enable Bridge Dynamic Voltage and Frequency Scaling (DVFS)"

	depends on TIDSPBRIDGE && OMAP_PM_SRF && CPU_FREQ

	default n

	help

	  DVFS allows DSP Bridge to initiate the operating point change to

	  scale the chip voltage and frequency in order to match the

	  performance and power consumption to the current processing

	  requirements.



config BRIDGE_MEMPOOL_SIZE

	hex "Physical memory pool size (Byte)"

	depends on TIDSPBRIDGE

	default 0x600000

	help

	  Allocate specified size of memory at booting time to avoid allocation

	  failure under heavy memory fragmentation after some use time.



config BRIDGE_DEBUG

	bool "DSP Bridge Debug Support"

	depends on TIDSPBRIDGE

	help

	  Say Y to enable Bridge debugging capabilities



config BRIDGE_RECOVERY

	bool "DSP Recovery Support"

	depends on TIDSPBRIDGE

	help

	  In case of DSP fatal error, BRIDGE driver will try to

	  recover itself.



config BRIDGE_CACHE_LINE_CHECK

	bool "Check buffers to be 128 byte aligned"

	depends on TIDSPBRIDGE

	default n

	help

	  When the DSP processes data, the DSP cache controller loads 128-Byte

	  chunks (lines) from SDRAM and writes the data back in 128-Byte chunks.

	  If a DMM buffer does not start and end on a 128-Byte boundary, the data

	  preceding the start address (SA) from the 128-Byte boundary to the SA

	  and the data at addresses trailing the end address (EA) from the EA to

	  the next 128-Byte boundary will be loaded and written back as well.

	  This can lead to heap corruption. Say Y, to enforce the check for 128

	  byte alignment, buffers failing this check will be rejected.



config BRIDGE_WDT3

	bool "Enable WDT3 interruptions"

	depends on TIDSPBRIDGE

	default n

	help

	  WTD3 is managed by DSP and once it is enabled, DSP side bridge is in

	  charge of refreshing the timer before overflow, if the DSP hangs MPU

	  will caught the interrupt and try to recover DSP.



config WDT_TIMEOUT

	int "DSP watchdog timer timeout (in secs)"

	depends on BRIDGE_WDT3

	default 5

	help

	   Watchdog timer timeout value, after that time if the watchdog timer

	   counter is not reset the wdt overflow interrupt will be triggered



comment "Bridge Notifications"

	depends on TIDSPBRIDGE



config BRIDGE_NTFY_PWRERR

	bool "Notify DSP Power Error"

	depends on TIDSPBRIDGE

	help

	  Enable notifications to registered clients on the event of power errror

	  trying to suspend bridge driver. Say Y, to signal this event as a fatal

	  error, this will require a bridge restart to recover.

drivers/staging/tidspbridge/Makefile

0 → 100644
+34 −0
Original line number Diff line number Diff line 
obj-$(CONFIG_TIDSPBRIDGE)	+= bridgedriver.o



libgen = gen/gb.o gen/gs.o gen/gh.o gen/uuidutil.o

libservices = services/sync.o services/cfg.o \

		services/ntfy.o services/services.o

libcore = core/chnl_sm.o core/msg_sm.o core/io_sm.o core/tiomap3430.o \

		core/tiomap3430_pwr.o core/tiomap_io.o \

		core/mmu_fault.o core/ue_deh.o core/wdt.o core/dsp-clock.o

libpmgr = pmgr/chnl.o pmgr/io.o pmgr/msg.o pmgr/cod.o pmgr/dev.o pmgr/dspapi.o \

		pmgr/dmm.o pmgr/cmm.o pmgr/dbll.o

librmgr = rmgr/dbdcd.o rmgr/disp.o rmgr/drv.o rmgr/mgr.o rmgr/node.o \

		rmgr/proc.o rmgr/pwr.o rmgr/rmm.o rmgr/strm.o rmgr/dspdrv.o \

		rmgr/nldr.o rmgr/drv_interface.o

libdload = dynload/cload.o dynload/getsection.o dynload/reloc.o \

		 dynload/tramp.o

libhw = hw/hw_mmu.o



bridgedriver-objs = $(libgen) $(libservices) $(libcore) $(libpmgr) $(librmgr) \

			$(libdload) $(libhw)



#Machine dependent

ccflags-y += -D_TI_ -D_DB_TIOMAP -DTMS32060 \

		-DTICFG_PROC_VER -DTICFG_EVM_TYPE -DCHNL_SMCLASS \

		-DCHNL_MESSAGES -DUSE_LEVEL_1_MACROS



ccflags-y += -Idrivers/staging/tidspbridge/include

ccflags-y += -Idrivers/staging/tidspbridge/services

ccflags-y += -Idrivers/staging/tidspbridge/core

ccflags-y += -Idrivers/staging/tidspbridge/pmgr

ccflags-y += -Idrivers/staging/tidspbridge/rmgr

ccflags-y += -Idrivers/staging/tidspbridge/dynload

ccflags-y += -Idrivers/staging/tidspbridge/hw

ccflags-y += -Iarch/arm