Commit c998911f authored by Anton Gerasimov's avatar Anton Gerasimov Committed by Michal Simek
Browse files

ARM: dts: zynq: Add support for Z-turn board 



Add a dts for MYIR Z-turn board and respective target in Makefile.

Signed-off-by: default avatarAnton Gerasimov <tossel@gmail.com>
Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
parent ce397d21

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -1109,6 +1109,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ 
	zynq-zc770-xm012.dtb \

	zynq-zc770-xm013.dtb \

	zynq-zed.dtb \

	zynq-zturn.dtb \

	zynq-zybo.dtb \

	zynq-zybo-z7.dtb

dtb-$(CONFIG_MACH_ARMADA_370) += \

arch/arm/boot/dts/zynq-zturn.dts

0 → 100644
+116 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 *  Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>

 *  Copyright (C) 2017 Alexander Graf <agraf@suse.de>

 *

 *  Based on zynq-zed.dts which is:

 *  Copyright (C) 2011 - 2014 Xilinx

 *  Copyright (C) 2012 National Instruments Corp.

 *

 */



/dts-v1/;

/include/ "zynq-7000.dtsi"



/ {

	model = "Zynq Z-Turn MYIR Board";

	compatible = "myir,zynq-zturn", "xlnx,zynq-7000";



	aliases {

		ethernet0 = &gem0;

		serial0 = &uart1;

		serial1 = &uart0;

		mmc0 = &sdhci0;

	};



	memory@0 {

		device_type = "memory";

		reg = <0x0 0x40000000>;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	gpio-leds {

		compatible = "gpio-leds";

		usr-led1 {

			label = "usr-led1";

			gpios = <&gpio0 0x0 0x1>;

			default-state = "off";

		};



		usr-led2 {

			label = "usr-led2";

			gpios = <&gpio0 0x9 0x1>;

			default-state = "off";

		};

	};



	gpio-keys {

		compatible = "gpio-keys";

		#address-cells = <1>;

		#size-cells = <0>;

		autorepeat;

		K1 {

			label = "K1";

			gpios = <&gpio0 0x32 0x1>;

			linux,code = <0x66>;

			gpio-key,wakeup;

			autorepeat;

		};

	};

};



&clkc {

	ps-clk-frequency = <33333333>;

};



&gem0 {

	status = "okay";

	phy-mode = "rgmii-id";

	phy-handle = <&ethernet_phy>;



	ethernet_phy: ethernet-phy@0 {

		reg = <0x0>;

	};

};



&sdhci0 {

	status = "okay";

};



&uart0 {

	status = "okay";

};



&uart1 {

	status = "okay";

};



&usb0 {

	status = "okay";

	dr_mode = "host";

};



&can0 {

	status = "okay";

};



&i2c0 {

	status = "okay";

	clock-frequency = <400000>;



	stlm75@49 {

		status = "okay";

		compatible = "lm75";

		reg = <0x49>;

	};



	accelerometer@53 {

		compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x";

		reg = <0x53>;

		interrupt-parent = <&intc>;

		interrupts = <0x0 0x1e 0x4>;

	};

};