Commit c7cf9964 authored by Michal Simek's avatar Michal Simek
Browse files

arm: zynq: Add Xilinx cc108 board 



The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs
and sd. But board is not supporting booting from sd card.

Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
parent 7d3439f9

Documentation/devicetree/bindings/arm/xilinx.txt

+5 −0
Original line number Diff line number Diff line
@@ -6,6 +6,11 @@ shall have the following properties. 
Required root node properties:

    - compatible = "xlnx,zynq-7000";



Additional compatible strings:



- Xilinx internal board cc108

  "xlnx,zynq-cc108"



---------------------------------------------------------------



Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -1062,6 +1062,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ 
	wm8750-apc8750.dtb \

	wm8850-w70v2.dtb

dtb-$(CONFIG_ARCH_ZYNQ) += \

	zynq-cc108.dtb \

	zynq-microzed.dtb \

	zynq-parallella.dtb \

	zynq-zc702.dtb \

arch/arm/boot/dts/zynq-cc108.dts

0 → 100644
+75 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0+

/*

 * Xilinx CC108 board DTS

 *

 * (C) Copyright 2007-2018 Xilinx, Inc.

 * (C) Copyright 2007-2013 Michal Simek

 * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd

 *

 * Michal SIMEK <monstr@monstr.eu>

 */

/dts-v1/;

/include/ "zynq-7000.dtsi"



/ {

	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";

	model = "Xilinx Zynq";



	aliases {

		ethernet0 = &gem0;

		serial0 = &uart0;

	};



	chosen {

		bootargs = "";

		stdout-path = "serial0:115200n8";

	};



	memory@0 {

		device_type = "memory";

		reg = <0x0 0x20000000>;

	};



	usb_phy0: phy0 {

		compatible = "usb-nop-xceiv";

		#phy-cells = <0>;

	};



	usb_phy1: phy1 {

		compatible = "usb-nop-xceiv";

		#phy-cells = <0>;

	};

};



&gem0 {

	status = "okay";

	phy-mode = "rgmii-id";

	phy-handle = <&ethernet_phy>;



	ethernet_phy: ethernet-phy@1 {

		reg = <1>;

		device_type = "ethernet-phy";

	};

};



&sdhci1 {

	status = "okay";

	broken-cd ;

	wp-inverted ;

};



&uart0 {

	status = "okay";

};



&usb0 {

	status = "okay";

	dr_mode = "host";

	usb-phy = <&usb_phy0>;

};



&usb1 {

	status = "okay";

	dr_mode = "host";

	usb-phy = <&usb_phy1>;

};