Commit bb17b787 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by James Bottomley
Browse files

[SCSI] gvp11: Reindentation 



Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent 09bc85b0

drivers/scsi/gvp11.c

+283 −279
Original line number Diff line number Diff line
@@ -21,6 +21,7 @@ 


#include <linux/stat.h>





#define DMA(ptr)	((gvp11_scsiregs *)((ptr)->base))

#define HDATA(ptr)	((struct WD33C93_hostdata *)((ptr)->hostdata))
@@ -55,15 +56,16 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) 
	static int scsi_alloc_out_of_range = 0;



	/* use bounce buffer if the physical address is bad */

    if (addr & HDATA(cmd->device->host)->dma_xfer_mask)

    {

	HDATA(cmd->device->host)->dma_bounce_len = (cmd->SCp.this_residual + 511)

	    & ~0x1ff;

	if (addr & HDATA(cmd->device->host)->dma_xfer_mask) {

		HDATA(cmd->device->host)->dma_bounce_len =

			(cmd->SCp.this_residual + 511) & ~0x1ff;



		if (!scsi_alloc_out_of_range) {

			HDATA(cmd->device->host)->dma_bounce_buffer =

		kmalloc (HDATA(cmd->device->host)->dma_bounce_len, GFP_KERNEL);

	    HDATA(cmd->device->host)->dma_buffer_pool = BUF_SCSI_ALLOCED;

				kmalloc(HDATA(cmd->device->host)->dma_bounce_len,

					GFP_KERNEL);

			HDATA(cmd->device->host)->dma_buffer_pool =

				BUF_SCSI_ALLOCED;

		}



		if (scsi_alloc_out_of_range ||
@@ -72,13 +74,13 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) 
				amiga_chip_alloc(HDATA(cmd->device->host)->dma_bounce_len,

						 "GVP II SCSI Bounce Buffer");



	    if(!HDATA(cmd->device->host)->dma_bounce_buffer)

	    {

			if (!HDATA(cmd->device->host)->dma_bounce_buffer) {

				HDATA(cmd->device->host)->dma_bounce_len = 0;

				return 1;

			}



	    HDATA(cmd->device->host)->dma_buffer_pool = BUF_CHIP_ALLOCED;

			HDATA(cmd->device->host)->dma_buffer_pool =

				BUF_CHIP_ALLOCED;

		}



		/* check if the address of the bounce buffer is OK */
@@ -86,7 +88,8 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) 


		if (addr & HDATA(cmd->device->host)->dma_xfer_mask) {

			/* fall back to Chip RAM if address out of range */

	    if( HDATA(cmd->device->host)->dma_buffer_pool == BUF_SCSI_ALLOCED) {

			if (HDATA(cmd->device->host)->dma_buffer_pool ==

			    BUF_SCSI_ALLOCED) {

				kfree(HDATA(cmd->device->host)->dma_bounce_buffer);

				scsi_alloc_out_of_range = 1;

			} else {
@@ -97,14 +100,14 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) 
				amiga_chip_alloc(HDATA(cmd->device->host)->dma_bounce_len,

						 "GVP II SCSI Bounce Buffer");



	    if(!HDATA(cmd->device->host)->dma_bounce_buffer)

	    {

			if (!HDATA(cmd->device->host)->dma_bounce_buffer) {

				HDATA(cmd->device->host)->dma_bounce_len = 0;

				return 1;

			}



			addr = virt_to_bus(HDATA(cmd->device->host)->dma_bounce_buffer);

	    HDATA(cmd->device->host)->dma_buffer_pool = BUF_CHIP_ALLOCED;

			HDATA(cmd->device->host)->dma_buffer_pool =

				BUF_CHIP_ALLOCED;

		}



		if (!dir_in) {
@@ -124,12 +127,13 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) 
	/* setup DMA *physical* address */

	DMA(cmd->device->host)->ACR = addr;



    if (dir_in)

	if (dir_in) {

		/* invalidate any cache */

		cache_clear(addr, cmd->SCp.this_residual);

    else

	} else {

		/* push any dirty cache */

		cache_push(addr, cmd->SCp.this_residual);

	}



	if ((bank_mask = (~HDATA(cmd->device->host)->dma_xfer_mask >> 18) & 0x01c0))

		DMA(cmd->device->host)->BANK = bank_mask & (addr >> 18);
@@ -257,8 +261,8 @@ int __init gvp11_detect(struct scsi_host_template *tpnt) 
		if (*scmd_3393 != q)	/* and so should the image at 0x1f */

			goto release;





    /* Ok, we probably have a wd33c93, but let's check a few other places

		/*

		 * Ok, we probably have a wd33c93, but let's check a few other places

		 * for good measure. Make sure that this works for both 'A and 'B

		 * chip versions.

		 */
@@ -307,11 +311,11 @@ int __init gvp11_detect(struct scsi_host_template *tpnt) 
		else

			HDATA(instance)->dma_xfer_mask = default_dma_xfer_mask;





		DMA(instance)->secret2 = 1;

		DMA(instance)->secret1 = 0;

		DMA(instance)->secret3 = 15;

	while (DMA(instance)->CNTR & GVP11_DMAC_BUSY) ;

		while (DMA(instance)->CNTR & GVP11_DMAC_BUSY)

			;

		DMA(instance)->CNTR = 0;



		DMA(instance)->BANK = 0;
@@ -330,8 +334,8 @@ int __init gvp11_detect(struct scsi_host_template *tpnt) 
			     (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10

						     : WD33C93_FS_12_15);



	if (request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED, "GVP11 SCSI",

			instance))

		if (request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED,

				"GVP11 SCSI", instance))

			goto unregister;

		DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE;

		num_gvp11++;

drivers/scsi/gvp11.h

+18 −18

File changed.

Contains only whitespace changes.