Unverified Commit 86131fb9 authored by Maxime Ripard's avatar Maxime Ripard
Browse files

ARM: dts: sunxi: Add missing backlight supply 



The pwm-backlight binding requires a power supply. Make sure we provide
one.

Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Acked-by: default avatarChen-Yu Tsai <wens@csie.org>
Acked-by: default avatarJernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210114113538.1233933-7-maxime@cerno.tech
parent e299e6dd

arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts

+1 −0
Original line number Diff line number Diff line
@@ -62,6 +62,7 @@ backlight: backlight { 
		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;

		default-brightness-level = <8>;

		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */

		power-supply = <&reg_vcc3v3>;

	};



	chosen {

arch/arm/boot/dts/sun4i-a10-inet1.dts

+1 −0
Original line number Diff line number Diff line
@@ -62,6 +62,7 @@ backlight: backlight { 
		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;

		default-brightness-level = <8>;

		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */

		power-supply = <&reg_vcc3v3>;

	};



	chosen {

arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts

+1 −0
Original line number Diff line number Diff line
@@ -62,6 +62,7 @@ backlight: backlight { 
		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;

		default-brightness-level = <8>;

		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */

		power-supply = <&reg_vcc3v3>;

	};



	chosen {

arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts

+1 −0
Original line number Diff line number Diff line
@@ -61,6 +61,7 @@ backlight: backlight { 
		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;

		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;

		default-brightness-level = <8>;

		power-supply = <&reg_vcc3v3>;

		/* TODO: backlight uses axp gpio1 as enable pin */

	};

arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts

+1 −0
Original line number Diff line number Diff line
@@ -28,6 +28,7 @@ backlight { 
		enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */

		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;

		default-brightness-level = <8>;

		power-supply = <&reg_vcc3v3>;

	};



	chosen {